H-index

A B C D E F G H I J K L M N O P Q R S T U V W

H

HARD_FAIL - enum entry in net.corda.data.p2p.gateway.certificates.RevocationMode
hasAad() - function in net.corda.data.membership.p2p.UnauthenticatedRegistrationRequestHeader.Builder: Checks whether the 'aad' field has been set.
hasAck() - function in net.corda.data.p2p.MessageAck.Builder: Checks whether the 'ack' field has been set.
hasActivatedMember() - function in net.corda.data.membership.db.request.command.ActivateMember.Builder: Checks whether the 'activatedMember' field has been set.
hasActor() - function in net.corda.data.virtualnode.VirtualNodeUpgradeRequest.Builder: Checks whether the 'actor' field has been set.
hasAddress() - function in net.corda.data.p2p.LinkOutHeader.Builder: Checks whether the 'address' field has been set.
hasAlgorithm() - function in net.corda.data.crypto.SecureHash.Builder: Checks whether the 'algorithm' field has been set.
hasAlias() - function in net.corda.data.certificates.rpc.request.ImportCertificateRpcRequest.Builder: Checks whether the 'alias' field has been set.
hasAlias() - function in net.corda.data.certificates.rpc.request.RetrieveCertificateRpcRequest.Builder: Checks whether the 'alias' field has been set.
hasAlias() - function in net.corda.data.crypto.wire.CryptoSigningKey.Builder: Checks whether the 'alias' field has been set.
hasAlias() - function in net.corda.data.crypto.wire.ops.rpc.commands.GenerateKeyPairCommand.Builder: Checks whether the 'alias' field has been set.
hasAliases() - function in net.corda.data.certificates.rpc.response.ListCertificateAliasRpcResponse.Builder: Checks whether the 'aliases' field has been set.
hasAlternativeSessionKeysAndCerts() - function in net.corda.data.p2p.HostedIdentityEntry.Builder: Checks whether the 'alternativeSessionKeysAndCerts' field has been set.
hasAmount() - function in net.corda.data.ledger.utxo.token.selection.data.Token.Builder: Checks whether the 'amount' field has been set.
hasAmountBuilder() - function in net.corda.data.ledger.utxo.token.selection.data.Token.Builder: Checks whether the 'amount' field has an active Builder instance The amount of the token
hasApprovedMember() - function in net.corda.data.membership.event.registration.MemberRegistrationApproved.Builder: Checks whether the 'approvedMember' field has been set.
hasApprovedMemberBuilder() - function in net.corda.data.membership.event.registration.MemberRegistrationApproved.Builder: Checks whether the 'approvedMember' field has an active Builder instance Holding identity of the member who was approved.
hasAtEnd() - function in net.corda.data.packaging.CpiSegmentResponse.Builder: Checks whether the 'atEnd' field has been set.
hasAttributes() - function in net.corda.data.packaging.CorDappManifest.Builder: Checks whether the 'attributes' field has been set.
hasAuthTag() - function in net.corda.data.p2p.crypto.AuthenticatedDataMessage.Builder: Checks whether the 'authTag' field has been set.
hasAuthTag() - function in net.corda.data.p2p.crypto.AuthenticatedEncryptedDataMessage.Builder: Checks whether the 'authTag' field has been set.
hasAuthTag() - function in net.corda.data.p2p.crypto.InitiatorHandshakeMessage.Builder: Checks whether the 'authTag' field has been set.
hasAuthTag() - function in net.corda.data.p2p.crypto.ResponderHandshakeMessage.Builder: Checks whether the 'authTag' field has been set.
hasAvailableBalance() - function in net.corda.data.ledger.utxo.token.selection.data.TokenBalanceQueryResult.Builder: Checks whether the 'availableBalance' field has been set.
hasAvailableBalanceBuilder() - function in net.corda.data.ledger.utxo.token.selection.data.TokenBalanceQueryResult.Builder: Checks whether the 'availableBalance' field has an active Builder instance The balance of tokens that have not been spent nor claimed
hasAvailableTokens() - function in net.corda.data.ledger.utxo.token.selection.state.TokenPoolCacheState.Builder: Checks whether the 'availableTokens' field has been set.
hasBlocksCompleted() - function in net.corda.data.ledger.utxo.token.selection.data.TokenFullSyncState.Builder: Checks whether the 'blocksCompleted' field has been set.
hasBloomFilter() - function in net.corda.data.membership.p2p.MembershipSyncRequest.Builder: Checks whether the 'bloomFilter' field has been set.
hasBloomFilterBuilder() - function in net.corda.data.membership.p2p.MembershipSyncRequest.Builder: Checks whether the 'bloomFilter' field has an active Builder instance Bloom filter to calculate missing MemberInfo entries.
hasBundleSymbolicName() - function in net.corda.data.packaging.CorDappManifest.Builder: Checks whether the 'bundleSymbolicName' field has been set.
hasBundleVersion() - function in net.corda.data.packaging.CorDappManifest.Builder: Checks whether the 'bundleVersion' field has been set.
hasBytes() - function in net.corda.data.crypto.SecureHash.Builder: Checks whether the 'bytes' field has been set.
hasBytes() - function in net.corda.data.crypto.wire.CryptoSignature.Builder: Checks whether the 'bytes' field has been set.
hasBytes() - function in net.corda.data.crypto.wire.CryptoSignatureParameterSpec.Builder: Checks whether the 'bytes' field has been set.
hasBytes() - function in net.corda.data.crypto.wire.CryptoSignatureWithKey.Builder: Checks whether the 'bytes' field has been set.
hasBytes() - function in net.corda.data.crypto.wire.ops.flow.commands.SignFlowCommand.Builder: Checks whether the 'bytes' field has been set.
hasBytes() - function in net.corda.data.crypto.wire.ops.rpc.commands.SignRpcCommand.Builder: Checks whether the 'bytes' field has been set.
hasCategory() - function in net.corda.data.crypto.wire.CryptoSigningKey.Builder: Checks whether the 'category' field has been set.
hasCategory() - function in net.corda.data.crypto.wire.hsm.HSMAssociationInfo.Builder: Checks whether the 'category' field has been set.
hasCategory() - function in net.corda.data.crypto.wire.hsm.registration.commands.AssignHSMCommand.Builder: Checks whether the 'category' field has been set.
hasCategory() - function in net.corda.data.crypto.wire.hsm.registration.commands.AssignSoftHSMCommand.Builder: Checks whether the 'category' field has been set.
hasCategory() - function in net.corda.data.crypto.wire.hsm.registration.queries.AssignedHSMQuery.Builder: Checks whether the 'category' field has been set.
hasCategory() - function in net.corda.data.crypto.wire.ops.flow.commands.GenerateFreshKeyFlowCommand.Builder: Checks whether the 'category' field has been set.
hasCategory() - function in net.corda.data.crypto.wire.ops.rpc.commands.GenerateFreshKeyRpcCommand.Builder: Checks whether the 'category' field has been set.
hasCategory() - function in net.corda.data.crypto.wire.ops.rpc.commands.GenerateKeyPairCommand.Builder: Checks whether the 'category' field has been set.
hasCategory() - function in net.corda.data.crypto.wire.ops.rpc.queries.SupportedSchemesRpcQuery.Builder: Checks whether the 'category' field has been set.
hasCause() - function in net.corda.data.membership.async.request.MembershipAsyncRequestState.Builder: Checks whether the 'cause' field has been set.
hasCertificateIndex() - function in net.corda.data.p2p.gateway.certificates.Revoked.Builder: Checks whether the 'certificateIndex' field has been set.
hasCertificates() - function in net.corda.data.certificates.rpc.request.ImportCertificateRpcRequest.Builder: Checks whether the 'certificates' field has been set.
hasCertificates() - function in net.corda.data.certificates.rpc.response.CertificateRetrievalRpcResponse.Builder: Checks whether the 'certificates' field has been set.
hasCertificates() - function in net.corda.data.p2p.gateway.certificates.RevocationCheckRequest.Builder: Checks whether the 'certificates' field has been set.
hasChangeDetails() - function in net.corda.data.permissions.PermissionAssociation.Builder: Checks whether the 'changeDetails' field has been set.
hasChangeDetails() - function in net.corda.data.permissions.RoleAssociation.Builder: Checks whether the 'changeDetails' field has been set.
hasChangeDetailsBuilder() - function in net.corda.data.permissions.PermissionAssociation.Builder: Checks whether the 'changeDetails' field has an active Builder instance
hasChangeDetailsBuilder() - function in net.corda.data.permissions.RoleAssociation.Builder: Checks whether the 'changeDetails' field has an active Builder instance
hasCheckpointStateKey() - function in net.corda.data.flow.FlowTimeout.Builder: Checks whether the 'checkpointStateKey' field has been set.
hasChecksum() - function in net.corda.data.chunking.Chunk.Builder: Checks whether the 'checksum' field has been set.
hasChecksum() - function in net.corda.data.chunking.UploadStatus.Builder: Checks whether the 'checksum' field has been set.
hasChecksumBuilder() - function in net.corda.data.chunking.Chunk.Builder: Checks whether the 'checksum' field has an active Builder instance checksum of assembled chunks
hasChecksumBuilder() - function in net.corda.data.chunking.UploadStatus.Builder: Checks whether the 'checksum' field has an active Builder instance The checksum of the file that was uploaded that can be used to reference it.
hasClaimedTokens() - function in net.corda.data.ledger.utxo.token.selection.data.TokenClaim.Builder: Checks whether the 'claimedTokens' field has been set.
hasClaimedTokens() - function in net.corda.data.ledger.utxo.token.selection.data.TokenClaimQueryResult.Builder: Checks whether the 'claimedTokens' field has been set.
hasClaimedTokenStateRefs() - function in net.corda.data.ledger.utxo.token.selection.data.TokenClaim.Builder: Checks whether the 'claimedTokenStateRefs' field has been set.
hasClaimId() - function in net.corda.data.ledger.utxo.token.selection.data.TokenClaim.Builder: Checks whether the 'claimId' field has been set.
hasClaimId() - function in net.corda.data.ledger.utxo.token.selection.data.TokenClaimQueryResult.Builder: Checks whether the 'claimId' field has been set.
hasClaimId() - function in net.corda.data.ledger.utxo.token.selection.data.TokenClaimRelease.Builder: Checks whether the 'claimId' field has been set.
hasClaimId() - function in net.corda.data.ledger.utxo.token.selection.data.TokenForceClaimRelease.Builder: Checks whether the 'claimId' field has been set.
hasClaimTimestamp() - function in net.corda.data.ledger.utxo.token.selection.data.TokenClaim.Builder: Checks whether the 'claimTimestamp' field has been set.
hasClassName() - function in net.corda.data.crypto.wire.CryptoSignatureParameterSpec.Builder: Checks whether the 'className' field has been set.
hasCodes() - function in net.corda.data.crypto.wire.CryptoKeySchemes.Builder: Checks whether the 'codes' field has been set.
hasCommand() - function in net.corda.data.membership.command.registration.RegistrationCommand.Builder: Checks whether the 'command' field has been set.
hasCommand() - function in net.corda.data.membership.command.synchronisation.SynchronisationCommand.Builder: Checks whether the 'command' field has been set.
hasCommand() - function in net.corda.data.membership.state.CompletedCommandMetadata.Builder: Checks whether the 'command' field has been set.
hasCommitTimestamp() - function in net.corda.data.uniqueness.UniquenessCheckResultSuccessAvro.Builder: Checks whether the 'commitTimestamp' field has been set.
hasComplete() - function in net.corda.data.chunking.UploadStatus.Builder: Checks whether the 'complete' field has been set.
hasComponent() - function in net.corda.data.p2p.markers.TtlExpiredMarker.Builder: Checks whether the 'component' field has been set.
hasConfig() - function in net.corda.data.config.ConfigurationManagementRequest.Builder: Checks whether the 'config' field has been set.
hasConfig() - function in net.corda.data.config.ConfigurationManagementResponse.Builder: Checks whether the 'config' field has been set.
hasConflictingStates() - function in net.corda.data.uniqueness.UniquenessCheckResultInputStateConflictAvro.Builder: Checks whether the 'conflictingStates' field has been set.
hasConflictingStates() - function in net.corda.data.uniqueness.UniquenessCheckResultReferenceStateConflictAvro.Builder: Checks whether the 'conflictingStates' field has been set.
hasConsumedTokens() - function in net.corda.data.ledger.utxo.token.selection.data.TokenLedgerChange.Builder: Checks whether the 'consumedTokens' field has been set.
hasContext() - function in net.corda.data.crypto.wire.hsm.registration.HSMRegistrationRequest.Builder: Checks whether the 'context' field has been set.
hasContext() - function in net.corda.data.crypto.wire.hsm.registration.HSMRegistrationResponse.Builder: Checks whether the 'context' field has been set.
hasContext() - function in net.corda.data.crypto.wire.hsm.registration.commands.AssignHSMCommand.Builder: Checks whether the 'context' field has been set.
hasContext() - function in net.corda.data.crypto.wire.ops.flow.FlowOpsRequest.Builder: Checks whether the 'context' field has been set.
hasContext() - function in net.corda.data.crypto.wire.ops.flow.FlowOpsResponse.Builder: Checks whether the 'context' field has been set.
hasContext() - function in net.corda.data.crypto.wire.ops.flow.commands.GenerateFreshKeyFlowCommand.Builder: Checks whether the 'context' field has been set.
hasContext() - function in net.corda.data.crypto.wire.ops.flow.commands.SignFlowCommand.Builder: Checks whether the 'context' field has been set.
hasContext() - function in net.corda.data.crypto.wire.ops.rpc.RpcOpsRequest.Builder: Checks whether the 'context' field has been set.
hasContext() - function in net.corda.data.crypto.wire.ops.rpc.RpcOpsResponse.Builder: Checks whether the 'context' field has been set.
hasContext() - function in net.corda.data.crypto.wire.ops.rpc.commands.DeriveSharedSecretCommand.Builder: Checks whether the 'context' field has been set.
hasContext() - function in net.corda.data.crypto.wire.ops.rpc.commands.GenerateFreshKeyRpcCommand.Builder: Checks whether the 'context' field has been set.
hasContext() - function in net.corda.data.crypto.wire.ops.rpc.commands.GenerateKeyPairCommand.Builder: Checks whether the 'context' field has been set.
hasContext() - function in net.corda.data.crypto.wire.ops.rpc.commands.GenerateWrappingKeyRpcCommand.Builder: Checks whether the 'context' field has been set.
hasContext() - function in net.corda.data.crypto.wire.ops.rpc.commands.SignRpcCommand.Builder: Checks whether the 'context' field has been set.
hasContext() - function in net.corda.data.membership.async.request.RegistrationAsyncRequest.Builder: Checks whether the 'context' field has been set.
hasContext() - function in net.corda.data.membership.db.request.MembershipPersistenceRequest.Builder: Checks whether the 'context' field has been set.
hasContext() - function in net.corda.data.membership.db.response.MembershipPersistenceResponse.Builder: Checks whether the 'context' field has been set.
hasContextBuilder() - function in net.corda.data.crypto.wire.hsm.registration.HSMRegistrationRequest.Builder: Checks whether the 'context' field has an active Builder instance Request context, tenant id, timestamp, etc.
hasContextBuilder() - function in net.corda.data.crypto.wire.hsm.registration.HSMRegistrationResponse.Builder: Checks whether the 'context' field has an active Builder instance Response context, tenant id, timestamp, etc.
hasContextBuilder() - function in net.corda.data.crypto.wire.hsm.registration.commands.AssignHSMCommand.Builder: Checks whether the 'context' field has an active Builder instance The optional key/value operation specific context
hasContextBuilder() - function in net.corda.data.crypto.wire.ops.flow.FlowOpsRequest.Builder: Checks whether the 'context' field has an active Builder instance Request context, tenant id, timestamp, etc.
hasContextBuilder() - function in net.corda.data.crypto.wire.ops.flow.FlowOpsResponse.Builder: Checks whether the 'context' field has an active Builder instance Response context, tenant id, timestamp, etc.
hasContextBuilder() - function in net.corda.data.crypto.wire.ops.flow.commands.GenerateFreshKeyFlowCommand.Builder: Checks whether the 'context' field has an active Builder instance The optional key/value operation specific context.
hasContextBuilder() - function in net.corda.data.crypto.wire.ops.flow.commands.SignFlowCommand.Builder: Checks whether the 'context' field has an active Builder instance The optional key/value operation specific context.
hasContextBuilder() - function in net.corda.data.crypto.wire.ops.rpc.RpcOpsRequest.Builder: Checks whether the 'context' field has an active Builder instance Request context, tenant id, timestamp, etc.
hasContextBuilder() - function in net.corda.data.crypto.wire.ops.rpc.RpcOpsResponse.Builder: Checks whether the 'context' field has an active Builder instance Response context, tenant id, timestamp, etc.
hasContextBuilder() - function in net.corda.data.crypto.wire.ops.rpc.commands.DeriveSharedSecretCommand.Builder: Checks whether the 'context' field has an active Builder instance The optional key/value operation specific context
hasContextBuilder() - function in net.corda.data.crypto.wire.ops.rpc.commands.GenerateFreshKeyRpcCommand.Builder: Checks whether the 'context' field has an active Builder instance The optional key/value operation specific context.
hasContextBuilder() - function in net.corda.data.crypto.wire.ops.rpc.commands.GenerateKeyPairCommand.Builder: Checks whether the 'context' field has an active Builder instance The optional key/value operation specific context
hasContextBuilder() - function in net.corda.data.crypto.wire.ops.rpc.commands.GenerateWrappingKeyRpcCommand.Builder: Checks whether the 'context' field has an active Builder instance The optional key/value operation specific context.
hasContextBuilder() - function in net.corda.data.crypto.wire.ops.rpc.commands.SignRpcCommand.Builder: Checks whether the 'context' field has an active Builder instance The optional key/value operation specific context
hasContextBuilder() - function in net.corda.data.membership.async.request.RegistrationAsyncRequest.Builder: Checks whether the 'context' field has an active Builder instance The member or MGM context required for on-boarding within a group.
hasContextBuilder() - function in net.corda.data.membership.db.request.MembershipPersistenceRequest.Builder: Checks whether the 'context' field has an active Builder instance Context for the given request
hasContextBuilder() - function in net.corda.data.membership.db.response.MembershipPersistenceResponse.Builder: Checks whether the 'context' field has an active Builder instance Context for the given request
hasContextPlatformProperties() - function in net.corda.data.flow.FlowStartContext.Builder: Checks whether the 'contextPlatformProperties' field has been set.
hasContextPlatformProperties() - function in net.corda.data.flow.event.session.SessionInit.Builder: Checks whether the 'contextPlatformProperties' field has been set.
hasContextPlatformProperties() - function in net.corda.data.flow.state.checkpoint.FlowStackItem.Builder: Checks whether the 'contextPlatformProperties' field has been set.
hasContextPlatformPropertiesBuilder() - function in net.corda.data.flow.FlowStartContext.Builder: Checks whether the 'contextPlatformProperties' field has an active Builder instance A map of platform context properties made available to the flow which will also be propagated to sub flows, initiated flows and services, associating the entire end to end flow execution path with a notion of a context.
hasContextPlatformPropertiesBuilder() - function in net.corda.data.flow.event.session.SessionInit.Builder: Checks whether the 'contextPlatformProperties' field has an active Builder instance A map of context platform properties made available to the flow which will also be propagated to sub flows, initiated flows and services
hasContextPlatformPropertiesBuilder() - function in net.corda.data.flow.state.checkpoint.FlowStackItem.Builder: Checks whether the 'contextPlatformProperties' field has an active Builder instance The context platform properties associated with this level in the Flow stack.
hasContextProperties() - function in net.corda.data.flow.event.external.ExternalEventContext.Builder: Checks whether the 'contextProperties' field has been set.
hasContextPropertiesBuilder() - function in net.corda.data.flow.event.external.ExternalEventContext.Builder: Checks whether the 'contextProperties' field has an active Builder instance The context properties of the issuing flow which the external processor can use as it wishes, for example to allow or disallow certain actions.
hasContextSessionProperties() - function in net.corda.data.flow.event.SessionEvent.Builder: Checks whether the 'contextSessionProperties' field has been set.
hasContextSessionPropertiesBuilder() - function in net.corda.data.flow.event.SessionEvent.Builder: Checks whether the 'contextSessionProperties' field has an active Builder instance A map of context properties received from a counterparty related to this flow session.
hasContextUserProperties() - function in net.corda.data.flow.event.session.SessionInit.Builder: Checks whether the 'contextUserProperties' field has been set.
hasContextUserProperties() - function in net.corda.data.flow.state.checkpoint.FlowStackItem.Builder: Checks whether the 'contextUserProperties' field has been set.
hasContextUserPropertiesBuilder() - function in net.corda.data.flow.event.session.SessionInit.Builder: Checks whether the 'contextUserProperties' field has an active Builder instance A map of context user properties made available to the flow which will also be propagated to sub flows, initiated flows and services
hasContextUserPropertiesBuilder() - function in net.corda.data.flow.state.checkpoint.FlowStackItem.Builder: Checks whether the 'contextUserProperties' field has an active Builder instance The context user properties associated with this level in the Flow stack.
hasCorDappCertificates() - function in net.corda.data.packaging.CpkMetadata.Builder: Checks whether the 'corDappCertificates' field has been set.
hasCorDappManifest() - function in net.corda.data.packaging.CpkMetadata.Builder: Checks whether the 'corDappManifest' field has been set.
hasCorDappManifestBuilder() - function in net.corda.data.packaging.CpkMetadata.Builder: Checks whether the 'corDappManifest' field has an active Builder instance
hasCorrelationKey() - function in net.corda.data.messaging.RPCRequest.Builder: Checks whether the 'correlationKey' field has been set.
hasCorrelationKey() - function in net.corda.data.messaging.RPCResponse.Builder: Checks whether the 'correlationKey' field has been set.
hasCounterpartyIdentity() - function in net.corda.data.flow.state.session.SessionState.Builder: Checks whether the 'counterpartyIdentity' field has been set.
hasCounterpartyIdentityBuilder() - function in net.corda.data.flow.state.session.SessionState.Builder: Checks whether the 'counterpartyIdentity' field has an active Builder instance Identity of the counterparty in the session.
hasCpiAllowlistHash() - function in net.corda.data.membership.p2p.MembershipSyncRequest.Builder: Checks whether the 'cpiAllowlistHash' field has been set.
hasCpiAllowlistHashBuilder() - function in net.corda.data.membership.p2p.MembershipSyncRequest.Builder: Checks whether the 'cpiAllowlistHash' field has an active Builder instance The hash representation of the CpiVersions which are allowed on the member side.
hasCpiFileChecksum() - function in net.corda.data.virtualnode.VirtualNodeCreateRequest.Builder: Checks whether the 'cpiFileChecksum' field has been set.
hasCpiFileChecksum() - function in net.corda.data.virtualnode.VirtualNodeCreateResponse.Builder: Checks whether the 'cpiFileChecksum' field has been set.
hasCpiFileChecksum() - function in net.corda.data.virtualnode.VirtualNodeUpgradeRequest.Builder: Checks whether the 'cpiFileChecksum' field has been set.
hasCpiFileChecksum() - function in net.corda.data.virtualnode.VirtualNodeUpgradeResponse.Builder: Checks whether the 'cpiFileChecksum' field has been set.
hasCpiId() - function in net.corda.data.flow.FlowStartContext.Builder: Checks whether the 'cpiId' field has been set.
hasCpiId() - function in net.corda.data.flow.event.session.SessionInit.Builder: Checks whether the 'cpiId' field has been set.
hasCpiIdentifier() - function in net.corda.data.virtualnode.VirtualNodeCreateResponse.Builder: Checks whether the 'cpiIdentifier' field has been set.
hasCpiIdentifier() - function in net.corda.data.virtualnode.VirtualNodeInfo.Builder: Checks whether the 'cpiIdentifier' field has been set.
hasCpiIdentifier() - function in net.corda.data.virtualnode.VirtualNodeUpgradeResponse.Builder: Checks whether the 'cpiIdentifier' field has been set.
hasCpiIdentifierBuilder() - function in net.corda.data.virtualnode.VirtualNodeCreateResponse.Builder: Checks whether the 'cpiIdentifier' field has an active Builder instance
hasCpiIdentifierBuilder() - function in net.corda.data.virtualnode.VirtualNodeInfo.Builder: Checks whether the 'cpiIdentifier' field has an active Builder instance
hasCpiIdentifierBuilder() - function in net.corda.data.virtualnode.VirtualNodeUpgradeResponse.Builder: Checks whether the 'cpiIdentifier' field has an active Builder instance
hasCpkChecksum() - function in net.corda.data.chunking.CpkChunkId.Builder: Checks whether the 'cpkChecksum' field has been set.
hasCpkChecksumBuilder() - function in net.corda.data.chunking.CpkChunkId.Builder: Checks whether the 'cpkChecksum' field has an active Builder instance CPK's checksum to which this chunk belongs to
hasCpkChunkPartNumber() - function in net.corda.data.chunking.CpkChunkId.Builder: Checks whether the 'cpkChunkPartNumber' field has been set.
hasCpkFileHashes() - function in net.corda.data.flow.state.checkpoint.PipelineState.Builder: Checks whether the 'cpkFileHashes' field has been set.
hasCpkMetadata() - function in net.corda.ledger.utxo.verification.TransactionVerificationRequest.Builder: Checks whether the 'cpkMetadata' field has been set.
hasCpks() - function in net.corda.data.packaging.CpiMetadata.Builder: Checks whether the 'cpks' field has been set.
hasCreated() - function in net.corda.data.crypto.wire.CryptoSigningKey.Builder: Checks whether the 'created' field has been set.
hasCreatedTimestamp() - function in net.corda.data.flow.FlowStartContext.Builder: Checks whether the 'createdTimestamp' field has been set.
hasCreatedTimestamp() - function in net.corda.data.flow.output.FlowStatus.Builder: Checks whether the 'createdTimestamp' field has been set.
hasCreationRemark() - function in net.corda.data.membership.preauth.PreAuthToken.Builder: Checks whether the 'creationRemark' field has been set.
hasCryptoDdlConnection() - function in net.corda.data.virtualnode.VirtualNodeCreateRequest.Builder: Checks whether the 'cryptoDdlConnection' field has been set.
hasCryptoDdlConnectionId() - function in net.corda.data.virtualnode.VirtualNodeCreateResponse.Builder: Checks whether the 'cryptoDdlConnectionId' field has been set.
hasCryptoDdlConnectionId() - function in net.corda.data.virtualnode.VirtualNodeInfo.Builder: Checks whether the 'cryptoDdlConnectionId' field has been set.
hasCryptoDdlConnectionId() - function in net.corda.data.virtualnode.VirtualNodeUpgradeResponse.Builder: Checks whether the 'cryptoDdlConnectionId' field has been set.
hasCryptoDmlConnection() - function in net.corda.data.virtualnode.VirtualNodeCreateRequest.Builder: Checks whether the 'cryptoDmlConnection' field has been set.
hasCryptoDmlConnectionId() - function in net.corda.data.virtualnode.VirtualNodeCreateResponse.Builder: Checks whether the 'cryptoDmlConnectionId' field has been set.
hasCryptoDmlConnectionId() - function in net.corda.data.virtualnode.VirtualNodeInfo.Builder: Checks whether the 'cryptoDmlConnectionId' field has been set.
hasCryptoDmlConnectionId() - function in net.corda.data.virtualnode.VirtualNodeUpgradeResponse.Builder: Checks whether the 'cryptoDmlConnectionId' field has been set.
hasCurrentPage() - function in net.corda.data.membership.p2p.MembershipPackage.Builder: Checks whether the 'currentPage' field has been set.
hasCustomDigestName() - function in net.corda.data.crypto.wire.CryptoSignatureSpec.Builder: Checks whether the 'customDigestName' field has been set.
hasCustomState() - function in net.corda.data.flow.state.checkpoint.Checkpoint.Builder: Checks whether the 'customState' field has been set.
hasCustomStateBuilder() - function in net.corda.data.flow.state.checkpoint.Checkpoint.Builder: Checks whether the 'customState' field has an active Builder instance Internal storage for pipeline extensions.
hasData() - function in net.corda.data.chunking.Chunk.Builder: Checks whether the 'data' field has been set.
hasData() - function in net.corda.data.ledger.persistence.UtxoTransactionOutput.Builder: Checks whether the 'data' field has been set.
hasData() - function in net.corda.data.membership.SignedData.Builder: Checks whether the 'data' field has been set.
hasDeclinedMember() - function in net.corda.data.membership.event.registration.MemberRegistrationDeclined.Builder: Checks whether the 'declinedMember' field has been set.
hasDeclinedMemberBuilder() - function in net.corda.data.membership.event.registration.MemberRegistrationDeclined.Builder: Checks whether the 'declinedMember' field has an active Builder instance Holding identity of the member who was declined.
hasDeprecatedAt() - function in net.corda.data.crypto.wire.hsm.HSMAssociationInfo.Builder: Checks whether the 'deprecatedAt' field has been set.
hasDestination() - function in net.corda.data.membership.command.registration.member.ProcessMemberVerificationRequest.Builder: Checks whether the 'destination' field has been set.
hasDestination() - function in net.corda.data.p2p.app.AuthenticatedMessageHeader.Builder: Checks whether the 'destination' field has been set.
hasDestination() - function in net.corda.data.p2p.app.OutboundUnauthenticatedMessageHeader.Builder: Checks whether the 'destination' field has been set.
hasDestinationBuilder() - function in net.corda.data.membership.command.registration.member.ProcessMemberVerificationRequest.Builder: Checks whether the 'destination' field has an active Builder instance Holding identity of the member who needs to be verified.
hasDestinationBuilder() - function in net.corda.data.p2p.app.AuthenticatedMessageHeader.Builder: Checks whether the 'destination' field has an active Builder instance The destination identity for this message.
hasDestinationBuilder() - function in net.corda.data.p2p.app.OutboundUnauthenticatedMessageHeader.Builder: Checks whether the 'destination' field has an active Builder instance The destination identity for this message.
hasDestinationIdentity() - function in net.corda.data.p2p.LinkOutHeader.Builder: Checks whether the 'destinationIdentity' field has been set.
hasDestinationIdentityBuilder() - function in net.corda.data.p2p.LinkOutHeader.Builder: Checks whether the 'destinationIdentity' field has an active Builder instance The destination identity (x500 name + group ID)
hasDestinationNetworkType() - function in net.corda.data.p2p.LinkOutHeader.Builder: Checks whether the 'destinationNetworkType' field has been set.
hasDistributionMetaData() - function in net.corda.data.membership.p2p.MembershipPackage.Builder: Checks whether the 'distributionMetaData' field has been set.
hasDistributionMetaData() - function in net.corda.data.membership.p2p.MembershipSyncRequest.Builder: Checks whether the 'distributionMetaData' field has been set.
hasDistributionMetaDataBuilder() - function in net.corda.data.membership.p2p.MembershipPackage.Builder: Checks whether the 'distributionMetaData' field has an active Builder instance Basic information about the data distribution, can also be a response to a sync.
hasDistributionMetaDataBuilder() - function in net.corda.data.membership.p2p.MembershipSyncRequest.Builder: Checks whether the 'distributionMetaData' field has an active Builder instance Basic information about the request.
hasDistributionType() - function in net.corda.data.membership.p2p.MembershipPackage.Builder: Checks whether the 'distributionType' field has been set.
hasEnabled() - function in net.corda.data.permissions.User.Builder: Checks whether the 'enabled' field has been set.
hasEnabled() - function in net.corda.data.permissions.management.user.CreateUserRequest.Builder: Checks whether the 'enabled' field has been set.
hasEnabled() - function in net.corda.data.permissions.summary.UserPermissionSummary.Builder: Checks whether the 'enabled' field has been set.
hasEncodingVersion() - function in net.corda.data.crypto.wire.CryptoSigningKey.Builder: Checks whether the 'encodingVersion' field has been set.
hasEncryptedData() - function in net.corda.data.p2p.crypto.InitiatorHandshakeMessage.Builder: Checks whether the 'encryptedData' field has been set.
hasEncryptedData() - function in net.corda.data.p2p.crypto.ResponderHandshakeMessage.Builder: Checks whether the 'encryptedData' field has been set.
hasEncryptedPayload() - function in net.corda.data.p2p.crypto.AuthenticatedEncryptedDataMessage.Builder: Checks whether the 'encryptedPayload' field has been set.
hasEntities() - function in net.corda.data.persistence.DeleteEntities.Builder: Checks whether the 'entities' field has been set.
hasEntities() - function in net.corda.data.persistence.MergeEntities.Builder: Checks whether the 'entities' field has been set.
hasEntities() - function in net.corda.data.persistence.PersistEntities.Builder: Checks whether the 'entities' field has been set.
hasEntityClassName() - function in net.corda.data.persistence.DeleteEntitiesById.Builder: Checks whether the 'entityClassName' field has been set.
hasEntityClassName() - function in net.corda.data.persistence.FindAll.Builder: Checks whether the 'entityClassName' field has been set.
hasEntityClassName() - function in net.corda.data.persistence.FindEntities.Builder: Checks whether the 'entityClassName' field has been set.
hasError() - function in net.corda.data.flow.event.WakeUpWithException.Builder: Checks whether the 'error' field has been set.
hasError() - function in net.corda.data.flow.event.external.ExternalEventResponse.Builder: Checks whether the 'error' field has been set.
hasError() - function in net.corda.data.flow.output.FlowStatus.Builder: Checks whether the 'error' field has been set.
hasError() - function in net.corda.data.flow.state.checkpoint.RetryState.Builder: Checks whether the 'error' field has been set.
hasErrorBuilder() - function in net.corda.data.flow.event.WakeUpWithException.Builder: Checks whether the 'error' field has an active Builder instance The error to be thrown back to the user code
hasErrorBuilder() - function in net.corda.data.flow.event.external.ExternalEventResponse.Builder: Checks whether the 'error' field has an active Builder instance The ExternalEventResponseError representing an error that occurred when processing the incoming external event request.
hasErrorBuilder() - function in net.corda.data.flow.output.FlowStatus.Builder: Checks whether the 'error' field has an active Builder instance Optional error message, this will be set if the flow status is 'FAILED'
hasErrorBuilder() - function in net.corda.data.flow.state.checkpoint.RetryState.Builder: Checks whether the 'error' field has an active Builder instance The original error that caused the retry
hasErrorKind() - function in net.corda.data.membership.db.response.query.PersistenceFailedResponse.Builder: Checks whether the 'errorKind' field has been set.
hasErrorMessage() - function in net.corda.data.ExceptionEnvelope.Builder: Checks whether the 'errorMessage' field has been set.
hasErrorMessage() - function in net.corda.data.flow.event.session.SessionError.Builder: Checks whether the 'errorMessage' field has been set.
hasErrorMessage() - function in net.corda.data.membership.db.response.query.PersistenceFailedResponse.Builder: Checks whether the 'errorMessage' field has been set.
hasErrorMessageBuilder() - function in net.corda.data.flow.event.session.SessionError.Builder: Checks whether the 'errorMessage' field has an active Builder instance
hasErrors() - function in net.corda.data.virtualnode.VirtualNodeOperationStatus.Builder: Checks whether the 'errors' field has been set.
hasErrorText() - function in net.corda.data.uniqueness.UniquenessCheckResultMalformedRequestAvro.Builder: Checks whether the 'errorText' field has been set.
hasErrorType() - function in net.corda.data.ExceptionEnvelope.Builder: Checks whether the 'errorType' field has been set.
hasErrorType() - function in net.corda.data.flow.event.external.ExternalEventResponseError.Builder: Checks whether the 'errorType' field has been set.
hasEvaluationTimestamp() - function in net.corda.data.uniqueness.UniquenessCheckResultTimeWindowOutOfBoundsAvro.Builder: Checks whether the 'evaluationTimestamp' field has been set.
hasEvent() - function in net.corda.data.deadletter.StateAndEventDeadLetterRecord.Builder: Checks whether the 'event' field has been set.
hasEvent() - function in net.corda.data.membership.event.MembershipEvent.Builder: Checks whether the 'event' field has been set.
hasEventToSend() - function in net.corda.data.flow.state.external.ExternalEventState.Builder: Checks whether the 'eventToSend' field has been set.
hasEventToSendBuilder() - function in net.corda.data.flow.state.external.ExternalEventState.Builder: Checks whether the 'eventToSend' field has an active Builder instance The event to send
hasException() - function in net.corda.data.chunking.UploadStatus.Builder: Checks whether the 'exception' field has been set.
hasException() - function in net.corda.data.config.ConfigurationManagementResponse.Builder: Checks whether the 'exception' field has been set.
hasException() - function in net.corda.data.crypto.wire.ops.flow.FlowOpsResponse.Builder: Checks whether the 'exception' field has been set.
hasException() - function in net.corda.data.flow.event.external.ExternalEventResponseError.Builder: Checks whether the 'exception' field has been set.
hasException() - function in net.corda.data.flow.state.external.ExternalEventStateStatus.Builder: Checks whether the 'exception' field has been set.
hasException() - function in net.corda.data.uniqueness.UniquenessCheckResultUnhandledExceptionAvro.Builder: Checks whether the 'exception' field has been set.
hasException() - function in net.corda.data.virtualnode.VirtualNodeManagementResponseFailure.Builder: Checks whether the 'exception' field has been set.
hasExceptionBuilder() - function in net.corda.data.chunking.UploadStatus.Builder: Checks whether the 'exception' field has an active Builder instance cause of failure if the request was unsuccessful
hasExceptionBuilder() - function in net.corda.data.config.ConfigurationManagementResponse.Builder: Checks whether the 'exception' field has an active Builder instance The cause of failure if the request was unsuccessful.
hasExceptionBuilder() - function in net.corda.data.crypto.wire.ops.flow.FlowOpsResponse.Builder: Checks whether the 'exception' field has an active Builder instance Exception information
hasExceptionBuilder() - function in net.corda.data.flow.event.external.ExternalEventResponseError.Builder: Checks whether the 'exception' field has an active Builder instance Exception information
hasExceptionBuilder() - function in net.corda.data.flow.state.external.ExternalEventStateStatus.Builder: Checks whether the 'exception' field has an active Builder instance Exception information
hasExceptionBuilder() - function in net.corda.data.uniqueness.UniquenessCheckResultUnhandledExceptionAvro.Builder: Checks whether the 'exception' field has an active Builder instance
hasExceptionBuilder() - function in net.corda.data.virtualnode.VirtualNodeManagementResponseFailure.Builder: Checks whether the 'exception' field has an active Builder instance Exception information
hasExpiryTime() - function in net.corda.data.flow.event.mapper.ScheduleCleanup.Builder: Checks whether the 'expiryTime' field has been set.
hasExpiryTime() - function in net.corda.data.flow.state.mapper.FlowMapperState.Builder: Checks whether the 'expiryTime' field has been set.
hasExternalChannelsConfig() - function in net.corda.data.packaging.CpkMetadata.Builder: Checks whether the 'externalChannelsConfig' field has been set.
hasExternalEventState() - function in net.corda.data.flow.state.checkpoint.FlowState.Builder: Checks whether the 'externalEventState' field has been set.
hasExternalEventStateBuilder() - function in net.corda.data.flow.state.checkpoint.FlowState.Builder: Checks whether the 'externalEventState' field has an active Builder instance Active external event request.
hasExternalId() - function in net.corda.data.crypto.wire.CryptoSigningKey.Builder: Checks whether the 'externalId' field has been set.
hasExternalId() - function in net.corda.data.crypto.wire.ops.flow.commands.GenerateFreshKeyFlowCommand.Builder: Checks whether the 'externalId' field has been set.
hasExternalId() - function in net.corda.data.crypto.wire.ops.rpc.commands.GenerateFreshKeyRpcCommand.Builder: Checks whether the 'externalId' field has been set.
hasExternalId() - function in net.corda.data.crypto.wire.ops.rpc.commands.GenerateKeyPairCommand.Builder: Checks whether the 'externalId' field has been set.
hasExternalMessagingRouteConfig() - function in net.corda.data.virtualnode.VirtualNodeInfo.Builder: Checks whether the 'externalMessagingRouteConfig' field has been set.
hasExtraField() - function in net.corda.data.test.EvolvedMessage.Builder: Checks whether the 'extra_field' field has been set.
hasFactoryClassName() - function in net.corda.data.flow.state.external.ExternalEventState.Builder: Checks whether the 'factoryClassName' field has been set.
hasFailedEvent() - function in net.corda.data.flow.state.checkpoint.RetryState.Builder: Checks whether the 'failedEvent' field has been set.
hasFailedEventBuilder() - function in net.corda.data.flow.state.checkpoint.RetryState.Builder: Checks whether the 'failedEvent' field has an active Builder instance Copy of the event that caused the failure
hasFailIfExists() - function in net.corda.data.crypto.wire.ops.rpc.commands.GenerateWrappingKeyRpcCommand.Builder: Checks whether the 'failIfExists' field has been set.
hasFiber() - function in net.corda.data.flow.state.checkpoint.FlowState.Builder: Checks whether the 'fiber' field has been set.
hasField(java.lang.String) - function in net.corda.v5.application.marshalling.json.JsonNodeReader: Determine whether this JsonNodeReader is an object with the specified field.
hasField(java.lang.String) - function in org.apache.avro.generic.GenericRecord
hasFileChecksum() - function in net.corda.ledger.utxo.verification.CordaPackageSummary.Builder: Checks whether the 'fileChecksum' field has been set.
hasFilter() - function in net.corda.data.crypto.wire.ops.rpc.queries.KeysRpcQuery.Builder: Checks whether the 'filter' field has been set.
hasFilterBits() - function in net.corda.data.sync.BloomFilter.Builder: Checks whether the 'filterBits' field has been set.
hasFilterBuilder() - function in net.corda.data.crypto.wire.ops.rpc.queries.KeysRpcQuery.Builder: Checks whether the 'filter' field has an active Builder instance Filter key-values such as category, schemeCodeName, alias, masterKeyAlias, createdAfter, createdBefore.
hasFilterLength() - function in net.corda.data.sync.BloomFilter.Builder: Checks whether the 'filterLength' field has been set.
hasFingerprint() - function in net.corda.data.AvroEnvelope.Builder: Checks whether the 'fingerprint' field has been set.
hasFirstFailureTimestamp() - function in net.corda.data.flow.state.checkpoint.RetryState.Builder: Checks whether the 'firstFailureTimestamp' field has been set.
hasFlags() - function in net.corda.data.AvroEnvelope.Builder: Checks whether the 'flags' field has been set.
hasFlags() - function in net.corda.data.test.EvolvedMessage.Builder: Checks whether the 'flags' field has been set.
hasFlowClassName() - function in net.corda.data.flow.FlowStartContext.Builder: Checks whether the 'flowClassName' field has been set.
hasFlowClassName() - function in net.corda.data.flow.output.FlowStatus.Builder: Checks whether the 'flowClassName' field has been set.
hasFlowExternalEventContext() - function in net.corda.data.crypto.wire.ops.flow.FlowOpsRequest.Builder: Checks whether the 'flowExternalEventContext' field has been set.
hasFlowExternalEventContext() - function in net.corda.data.ledger.persistence.LedgerPersistenceRequest.Builder: Checks whether the 'flowExternalEventContext' field has been set.
hasFlowExternalEventContext() - function in net.corda.data.persistence.EntityRequest.Builder: Checks whether the 'flowExternalEventContext' field has been set.
hasFlowExternalEventContext() - function in net.corda.data.uniqueness.UniquenessCheckRequestAvro.Builder: Checks whether the 'flowExternalEventContext' field has been set.
hasFlowExternalEventContext() - function in net.corda.ledger.utxo.verification.TransactionVerificationRequest.Builder: Checks whether the 'flowExternalEventContext' field has been set.
hasFlowExternalEventContextBuilder() - function in net.corda.data.crypto.wire.ops.flow.FlowOpsRequest.Builder: Checks whether the 'flowExternalEventContext' field has an active Builder instance The context of the external event that this request was sent from.
hasFlowExternalEventContextBuilder() - function in net.corda.data.ledger.persistence.LedgerPersistenceRequest.Builder: Checks whether the 'flowExternalEventContext' field has an active Builder instance The context of the external event that this request was sent from.
hasFlowExternalEventContextBuilder() - function in net.corda.data.persistence.EntityRequest.Builder: Checks whether the 'flowExternalEventContext' field has an active Builder instance The context of the external event that this request was sent from.
hasFlowExternalEventContextBuilder() - function in net.corda.data.uniqueness.UniquenessCheckRequestAvro.Builder: Checks whether the 'flowExternalEventContext' field has an active Builder instance The context of the external event that this request was sent from.
hasFlowExternalEventContextBuilder() - function in net.corda.ledger.utxo.verification.TransactionVerificationRequest.Builder: Checks whether the 'flowExternalEventContext' field has an active Builder instance The context of the external event that this request was sent from.
hasFlowId() - function in net.corda.data.flow.event.FlowEvent.Builder: Checks whether the 'flowId' field has been set.
hasFlowId() - function in net.corda.data.flow.event.external.ExternalEventContext.Builder: Checks whether the 'flowId' field has been set.
hasFlowId() - function in net.corda.data.flow.event.session.SessionInit.Builder: Checks whether the 'flowId' field has been set.
hasFlowId() - function in net.corda.data.flow.output.FlowStatus.Builder: Checks whether the 'flowId' field has been set.
hasFlowId() - function in net.corda.data.flow.state.checkpoint.Checkpoint.Builder: Checks whether the 'flowId' field has been set.
hasFlowId() - function in net.corda.data.flow.state.mapper.FlowMapperState.Builder: Checks whether the 'flowId' field has been set.
hasFlowMetricsState() - function in net.corda.data.flow.state.checkpoint.Checkpoint.Builder: Checks whether the 'flowMetricsState' field has been set.
hasFlowName() - function in net.corda.data.flow.state.checkpoint.FlowStackItem.Builder: Checks whether the 'flowName' field has been set.
hasFlowOperationalStatus() - function in net.corda.data.virtualnode.VirtualNodeCreateResponse.Builder: Checks whether the 'flowOperationalStatus' field has been set.
hasFlowOperationalStatus() - function in net.corda.data.virtualnode.VirtualNodeInfo.Builder: Checks whether the 'flowOperationalStatus' field has been set.
hasFlowOperationalStatus() - function in net.corda.data.virtualnode.VirtualNodeStateChangeResponse.Builder: Checks whether the 'flowOperationalStatus' field has been set.
hasFlowOperationalStatus() - function in net.corda.data.virtualnode.VirtualNodeUpgradeResponse.Builder: Checks whether the 'flowOperationalStatus' field has been set.
hasFlowP2pOperationalStatus() - function in net.corda.data.virtualnode.VirtualNodeCreateResponse.Builder: Checks whether the 'flowP2pOperationalStatus' field has been set.
hasFlowP2pOperationalStatus() - function in net.corda.data.virtualnode.VirtualNodeInfo.Builder: Checks whether the 'flowP2pOperationalStatus' field has been set.
hasFlowP2pOperationalStatus() - function in net.corda.data.virtualnode.VirtualNodeStateChangeResponse.Builder: Checks whether the 'flowP2pOperationalStatus' field has been set.
hasFlowP2pOperationalStatus() - function in net.corda.data.virtualnode.VirtualNodeUpgradeResponse.Builder: Checks whether the 'flowP2pOperationalStatus' field has been set.
hasFlowStackItems() - function in net.corda.data.flow.state.checkpoint.FlowState.Builder: Checks whether the 'flowStackItems' field has been set.
hasFlowStartArgs() - function in net.corda.data.flow.event.StartFlow.Builder: Checks whether the 'flowStartArgs' field has been set.
hasFlowStartContext() - function in net.corda.data.flow.state.checkpoint.FlowState.Builder: Checks whether the 'flowStartContext' field has been set.
hasFlowStartContextBuilder() - function in net.corda.data.flow.state.checkpoint.FlowState.Builder: Checks whether the 'flowStartContext' field has an active Builder instance Context data captured when the flow was started.
hasFlowStartOperationalStatus() - function in net.corda.data.virtualnode.VirtualNodeCreateResponse.Builder: Checks whether the 'flowStartOperationalStatus' field has been set.
hasFlowStartOperationalStatus() - function in net.corda.data.virtualnode.VirtualNodeInfo.Builder: Checks whether the 'flowStartOperationalStatus' field has been set.
hasFlowStartOperationalStatus() - function in net.corda.data.virtualnode.VirtualNodeStateChangeResponse.Builder: Checks whether the 'flowStartOperationalStatus' field has been set.
hasFlowStartOperationalStatus() - function in net.corda.data.virtualnode.VirtualNodeUpgradeResponse.Builder: Checks whether the 'flowStartOperationalStatus' field has been set.
hasFlowState() - function in net.corda.data.flow.state.checkpoint.Checkpoint.Builder: Checks whether the 'flowState' field has been set.
hasFlowStateBuilder() - function in net.corda.data.flow.state.checkpoint.Checkpoint.Builder: Checks whether the 'flowState' field has an active Builder instance Current flow execution state.
hasFlowStatus() - function in net.corda.data.flow.output.FlowStatus.Builder: Checks whether the 'flowStatus' field has been set.
hasForceUpgrade() - function in net.corda.data.virtualnode.VirtualNodeUpgradeRequest.Builder: Checks whether the 'forceUpgrade' field has been set.
hasFullKeyIds() - function in net.corda.data.crypto.wire.ops.flow.queries.ByIdsFlowQuery.Builder: Checks whether the 'fullKeyIds' field has been set.
hasFullKeyIdsBuilder() - function in net.corda.data.crypto.wire.ops.flow.queries.ByIdsFlowQuery.Builder: Checks whether the 'fullKeyIds' field has an active Builder instance List of full key ids
hasFullName() - function in net.corda.data.permissions.User.Builder: Checks whether the 'fullName' field has been set.
hasFullName() - function in net.corda.data.permissions.management.user.CreateUserRequest.Builder: Checks whether the 'fullName' field has been set.
hasFullSyncState() - function in net.corda.data.ledger.utxo.token.selection.state.TokenSyncState.Builder: Checks whether the 'fullSyncState' field has been set.
hasFullSyncStateBuilder() - function in net.corda.data.ledger.utxo.token.selection.state.TokenSyncState.Builder: Checks whether the 'fullSyncState' field has an active Builder instance The current state of a full sync
hasGroupId() - function in net.corda.data.identity.HoldingIdentity.Builder: Checks whether the 'groupId' field has been set.
hasGroupId() - function in net.corda.data.membership.StaticNetworkInfo.Builder: Checks whether the 'groupId' field has been set.
hasGroupId() - function in net.corda.data.membership.db.request.query.QueryStaticNetworkInfo.Builder: Checks whether the 'groupId' field has been set.
hasGroupId() - function in net.corda.data.p2p.crypto.internal.InitiatorEncryptedExtensions.Builder: Checks whether the 'groupId' field has been set.
hasGroupId() - function in net.corda.data.p2p.crypto.internal.InitiatorHandshakeIdentity.Builder: Checks whether the 'groupId' field has been set.
hasGroupId() - function in net.corda.data.p2p.mtls.MgmAllowedCertificateSubject.Builder: Checks whether the 'groupId' field has been set.
hasGroupParameters() - function in net.corda.data.membership.PersistentGroupParameters.Builder: Checks whether the 'groupParameters' field has been set.
hasGroupParameters() - function in net.corda.data.membership.SignedGroupParameters.Builder: Checks whether the 'groupParameters' field has been set.
hasGroupParameters() - function in net.corda.data.membership.StaticNetworkInfo.Builder: Checks whether the 'groupParameters' field has been set.
hasGroupParameters() - function in net.corda.data.membership.db.request.command.PersistGroupParameters.Builder: Checks whether the 'groupParameters' field has been set.
hasGroupParameters() - function in net.corda.data.membership.db.response.command.ActivateMemberResponse.Builder: Checks whether the 'groupParameters' field has been set.
hasGroupParameters() - function in net.corda.data.membership.db.response.command.PersistGroupParametersResponse.Builder: Checks whether the 'groupParameters' field has been set.
hasGroupParameters() - function in net.corda.data.membership.db.response.command.SuspendMemberResponse.Builder: Checks whether the 'groupParameters' field has been set.
hasGroupParameters() - function in net.corda.data.membership.p2p.MembershipPackage.Builder: Checks whether the 'groupParameters' field has been set.
hasGroupParametersBuilder() - function in net.corda.data.membership.PersistentGroupParameters.Builder: Checks whether the 'groupParameters' field has an active Builder instance GroupParameters which should be signed by the MGM unless the view owner is an MGM.
hasGroupParametersBuilder() - function in net.corda.data.membership.StaticNetworkInfo.Builder: Checks whether the 'groupParameters' field has an active Builder instance Group Parameters for the group.
hasGroupParametersBuilder() - function in net.corda.data.membership.db.request.command.PersistGroupParameters.Builder: Checks whether the 'groupParameters' field has an active Builder instance The group parameters to persist.
hasGroupParametersBuilder() - function in net.corda.data.membership.db.response.command.ActivateMemberResponse.Builder: Checks whether the 'groupParameters' field has an active Builder instance The persisted set of group parameters, only updated if the member being activated was a notary.
hasGroupParametersBuilder() - function in net.corda.data.membership.db.response.command.PersistGroupParametersResponse.Builder: Checks whether the 'groupParameters' field has an active Builder instance The persisted set of group parameters.
hasGroupParametersBuilder() - function in net.corda.data.membership.db.response.command.SuspendMemberResponse.Builder: Checks whether the 'groupParameters' field has an active Builder instance The persisted set of group parameters, only updated if the member being suspended was a notary.
hasGroupParametersBuilder() - function in net.corda.data.membership.p2p.MembershipPackage.Builder: Checks whether the 'groupParameters' field has an active Builder instance GroupParameters updates.
hasGroupParametersHash() - function in net.corda.data.membership.p2p.MembershipSyncRequest.Builder: Checks whether the 'groupParametersHash' field has been set.
hasGroupParametersHashBuilder() - function in net.corda.data.membership.p2p.MembershipSyncRequest.Builder: Checks whether the 'groupParametersHash' field has an active Builder instance The hash value of the latest GroupParameters the member can see.
hasGroupPolicy() - function in net.corda.data.membership.rpc.response.MGMGroupPolicyResponse.Builder: Checks whether the 'groupPolicy' field has been set.
hasGroupPolicy() - function in net.corda.data.packaging.CpiMetadata.Builder: Checks whether the 'groupPolicy' field has been set.
hasGroupVisibility() - function in net.corda.data.permissions.Permission.Builder: Checks whether the 'groupVisibility' field has been set.
hasGroupVisibility() - function in net.corda.data.permissions.Role.Builder: Checks whether the 'groupVisibility' field has been set.
hasGroupVisibility() - function in net.corda.data.permissions.management.permission.CreatePermissionRequest.Builder: Checks whether the 'groupVisibility' field has been set.
hasGroupVisibility() - function in net.corda.data.permissions.management.role.CreateRoleRequest.Builder: Checks whether the 'groupVisibility' field has been set.
hasGroupVisibility() - function in net.corda.data.permissions.summary.PermissionSummary.Builder: Checks whether the 'groupVisibility' field has been set.
hash(kotlin.Array,net.corda.v5.crypto.DigestAlgorithmName) - function in net.corda.v5.application.crypto.DigestService: Computes the digest of the byte[].
hash(java.io.InputStream,net.corda.v5.crypto.DigestAlgorithmName) - function in net.corda.v5.application.crypto.DigestService: Computes the digest of the InputStream.
hasHash() - function in net.corda.data.ledger.persistence.FindSignedGroupParameters.Builder: Checks whether the 'hash' field has been set.
hasHash() - function in net.corda.data.packaging.CpiMetadata.Builder: Checks whether the 'hash' field has been set.
hasHash() - function in net.corda.data.packaging.CpkMetadata.Builder: Checks whether the 'hash' field has been set.
hasHashBuilder() - function in net.corda.data.packaging.CpiMetadata.Builder: Checks whether the 'hash' field has an active Builder instance
hasHashBuilder() - function in net.corda.data.packaging.CpkMetadata.Builder: Checks whether the 'hash' field has an active Builder instance
hasHashCheck() - function in net.corda.data.membership.p2p.SignedMemberships.Builder: Checks whether the 'hashCheck' field has been set.
hasHashCheckBuilder() - function in net.corda.data.membership.p2p.SignedMemberships.Builder: Checks whether the 'hashCheck' field has an active Builder instance Hash value to help identify out-of-sync members.
hasHashedPassword() - function in net.corda.data.permissions.User.Builder: Checks whether the 'hashedPassword' field has been set.
hasHashes() - function in net.corda.data.crypto.SecureHashes.Builder: Checks whether the 'hashes' field has been set.
hasHashes() - function in net.corda.data.crypto.ShortHashes.Builder: Checks whether the 'hashes' field has been set.
hasHashSeed() - function in net.corda.data.sync.BloomFilter.Builder: Checks whether the 'hashSeed' field has been set.
hasHasScheduledCleanup() - function in net.corda.data.flow.state.session.SessionState.Builder: Checks whether the 'hasScheduledCleanup' field has been set.
hashCode() - function in java.lang.annotation.Annotation
hashCode() - function in java.lang.annotation.Annotation
hashCode() - function in java.lang.annotation.Annotation
hashCode() - function in java.lang.annotation.Annotation
hashCode() - function in net.corda.v5.application.crypto.DigitalSignatureAndMetadata
hashCode() - function in net.corda.v5.application.crypto.DigitalSignatureMetadata
hashCode() - function in net.corda.v5.base.exceptions.CordaRuntimeException
hashCode() - function in net.corda.v5.base.exceptions.CordaRuntimeException
hashCode() - function in net.corda.v5.base.exceptions.CordaRuntimeException
hashCode() - function in net.corda.v5.base.exceptions.CordaRuntimeException
hashCode() - function in net.corda.v5.base.exceptions.CordaRuntimeException
hashCode() - function in net.corda.v5.base.exceptions.CordaRuntimeException
hashCode() - function in net.corda.v5.base.exceptions.CordaRuntimeException
hashCode() - function in net.corda.v5.base.exceptions.CordaRuntimeException
hashCode() - function in net.corda.v5.base.exceptions.CordaRuntimeException
hashCode() - function in net.corda.v5.base.exceptions.CordaRuntimeException
hashCode() - function in net.corda.v5.base.types.MemberX500Name
hashCode() - function in net.corda.v5.base.versioning.Version
hashCode() - function in net.corda.v5.crypto.CompositeKeyNodeAndWeight
hashCode() - function in net.corda.v5.crypto.DigestAlgorithmName: Returns a hash code value for the object.
hashCode() - function in net.corda.v5.ledger.utxo.StateRef: Serves as the default hash function.
hashCode() - function in net.corda.v5.ledger.utxo.observer.UtxoToken: Serves as the default hash function.
hashCode() - function in net.corda.v5.ledger.utxo.observer.UtxoTokenFilterFields: Serves as the default hash function.
hashCode() - function in net.corda.v5.ledger.utxo.observer.UtxoTokenPoolKey: Serves as the default hash function.
hashCode() - function in net.corda.v5.ledger.utxo.token.selection.TokenBalanceCriteria: Serves as the default hash function.
hashCode() - function in net.corda.v5.ledger.utxo.token.selection.TokenClaimCriteria: Serves as the default hash function.
hashCode() - function in org.apache.avro.data.RecordBuilderBase
hashCode() - function in org.apache.avro.specific.SpecificFixed
hashCode() - function in org.apache.avro.specific.SpecificRecordBase
HashDigestConstants - class in net.corda.v5.crypto.merkle: An implementation of RFC6962 compatible merkle tree.
hasHeader() - function in net.corda.data.membership.p2p.UnauthenticatedRegistrationRequest.Builder: Checks whether the 'header' field has been set.
hasHeader() - function in net.corda.data.p2p.LinkOutMessage.Builder: Checks whether the 'header' field has been set.
hasHeader() - function in net.corda.data.p2p.app.AuthenticatedMessage.Builder: Checks whether the 'header' field has been set.
hasHeader() - function in net.corda.data.p2p.app.InboundUnauthenticatedMessage.Builder: Checks whether the 'header' field has been set.
hasHeader() - function in net.corda.data.p2p.app.OutboundUnauthenticatedMessage.Builder: Checks whether the 'header' field has been set.
hasHeader() - function in net.corda.data.p2p.crypto.AuthenticatedDataMessage.Builder: Checks whether the 'header' field has been set.
hasHeader() - function in net.corda.data.p2p.crypto.AuthenticatedEncryptedDataMessage.Builder: Checks whether the 'header' field has been set.
hasHeader() - function in net.corda.data.p2p.crypto.InitiatorHandshakeMessage.Builder: Checks whether the 'header' field has been set.
hasHeader() - function in net.corda.data.p2p.crypto.InitiatorHelloMessage.Builder: Checks whether the 'header' field has been set.
hasHeader() - function in net.corda.data.p2p.crypto.ResponderHandshakeMessage.Builder: Checks whether the 'header' field has been set.
hasHeader() - function in net.corda.data.p2p.crypto.ResponderHelloMessage.Builder: Checks whether the 'header' field has been set.
hasHeaderBuilder() - function in net.corda.data.membership.p2p.UnauthenticatedRegistrationRequest.Builder: Checks whether the 'header' field has an active Builder instance Header of the request used later for decrypting the payload.
hasHeaderBuilder() - function in net.corda.data.p2p.LinkOutMessage.Builder: Checks whether the 'header' field has an active Builder instance
hasHeaderBuilder() - function in net.corda.data.p2p.app.AuthenticatedMessage.Builder: Checks whether the 'header' field has an active Builder instance
hasHeaderBuilder() - function in net.corda.data.p2p.app.InboundUnauthenticatedMessage.Builder: Checks whether the 'header' field has an active Builder instance
hasHeaderBuilder() - function in net.corda.data.p2p.app.OutboundUnauthenticatedMessage.Builder: Checks whether the 'header' field has an active Builder instance
hasHeaderBuilder() - function in net.corda.data.p2p.crypto.AuthenticatedDataMessage.Builder: Checks whether the 'header' field has an active Builder instance
hasHeaderBuilder() - function in net.corda.data.p2p.crypto.AuthenticatedEncryptedDataMessage.Builder: Checks whether the 'header' field has an active Builder instance
hasHeaderBuilder() - function in net.corda.data.p2p.crypto.InitiatorHandshakeMessage.Builder: Checks whether the 'header' field has an active Builder instance
hasHeaderBuilder() - function in net.corda.data.p2p.crypto.InitiatorHelloMessage.Builder: Checks whether the 'header' field has an active Builder instance
hasHeaderBuilder() - function in net.corda.data.p2p.crypto.ResponderHandshakeMessage.Builder: Checks whether the 'header' field has an active Builder instance
hasHeaderBuilder() - function in net.corda.data.p2p.crypto.ResponderHelloMessage.Builder: Checks whether the 'header' field has an active Builder instance
hasHeartbeatTimestamp() - function in net.corda.data.virtualnode.VirtualNodeOperationStatus.Builder: Checks whether the 'heartbeatTimestamp' field has been set.
hasHoldingId() - function in net.corda.data.virtualnode.VirtualNodeCreateRequest.Builder: Checks whether the 'holdingId' field has been set.
hasHoldingIdBuilder() - function in net.corda.data.virtualnode.VirtualNodeCreateRequest.Builder: Checks whether the 'holdingId' field has an active Builder instance
hasHoldingIdentifierHash() - function in net.corda.data.virtualnode.VirtualNodeCreateResponse.Builder: Checks whether the 'holdingIdentifierHash' field has been set.
hasHoldingIdentifierHash() - function in net.corda.data.virtualnode.VirtualNodeUpgradeResponse.Builder: Checks whether the 'holdingIdentifierHash' field has been set.
hasHoldingIdentity() - function in net.corda.data.certificates.rpc.request.CertificateRpcRequest.Builder: Checks whether the 'holdingIdentity' field has been set.
hasHoldingIdentity() - function in net.corda.data.ledger.persistence.LedgerPersistenceRequest.Builder: Checks whether the 'holdingIdentity' field has been set.
hasHoldingIdentity() - function in net.corda.data.ledger.utxo.token.selection.event.TokenSyncEvent.Builder: Checks whether the 'holdingIdentity' field has been set.
hasHoldingIdentity() - function in net.corda.data.ledger.utxo.token.selection.state.TokenSyncState.Builder: Checks whether the 'holdingIdentity' field has been set.
hasHoldingIdentity() - function in net.corda.data.membership.db.request.MembershipRequestContext.Builder: Checks whether the 'holdingIdentity' field has been set.
hasHoldingIdentity() - function in net.corda.data.membership.db.response.MembershipResponseContext.Builder: Checks whether the 'holdingIdentity' field has been set.
hasHoldingIdentity() - function in net.corda.data.membership.db.response.query.MemberSignature.Builder: Checks whether the 'holdingIdentity' field has been set.
hasHoldingIdentity() - function in net.corda.data.p2p.GatewayTlsCertificates.Builder: Checks whether the 'holdingIdentity' field has been set.
hasHoldingIdentity() - function in net.corda.data.p2p.HostedIdentityEntry.Builder: Checks whether the 'holdingIdentity' field has been set.
hasHoldingIdentity() - function in net.corda.data.persistence.EntityRequest.Builder: Checks whether the 'holdingIdentity' field has been set.
hasHoldingIdentity() - function in net.corda.data.uniqueness.UniquenessCheckRequestAvro.Builder: Checks whether the 'holdingIdentity' field has been set.
hasHoldingIdentity() - function in net.corda.data.virtualnode.VirtualNodeCreateResponse.Builder: Checks whether the 'holdingIdentity' field has been set.
hasHoldingIdentity() - function in net.corda.data.virtualnode.VirtualNodeInfo.Builder: Checks whether the 'holdingIdentity' field has been set.
hasHoldingIdentity() - function in net.corda.data.virtualnode.VirtualNodeUpgradeResponse.Builder: Checks whether the 'holdingIdentity' field has been set.
hasHoldingIdentity() - function in net.corda.ledger.utxo.verification.TransactionVerificationRequest.Builder: Checks whether the 'holdingIdentity' field has been set.
hasHoldingIdentityBuilder() - function in net.corda.data.ledger.persistence.LedgerPersistenceRequest.Builder: Checks whether the 'holdingIdentity' field has an active Builder instance The holding identity of the user making the DB request.
hasHoldingIdentityBuilder() - function in net.corda.data.ledger.utxo.token.selection.event.TokenSyncEvent.Builder: Checks whether the 'holdingIdentity' field has an active Builder instance The holding identity of the user making the request
hasHoldingIdentityBuilder() - function in net.corda.data.ledger.utxo.token.selection.state.TokenSyncState.Builder: Checks whether the 'holdingIdentity' field has an active Builder instance The holding identity of the user making the request
hasHoldingIdentityBuilder() - function in net.corda.data.membership.db.request.MembershipRequestContext.Builder: Checks whether the 'holdingIdentity' field has an active Builder instance Holding identity of the member for which the request is made.
hasHoldingIdentityBuilder() - function in net.corda.data.membership.db.response.MembershipResponseContext.Builder: Checks whether the 'holdingIdentity' field has an active Builder instance Holding identity of the member for which the request was made.
hasHoldingIdentityBuilder() - function in net.corda.data.membership.db.response.query.MemberSignature.Builder: Checks whether the 'holdingIdentity' field has an active Builder instance The member holding identity.
hasHoldingIdentityBuilder() - function in net.corda.data.p2p.GatewayTlsCertificates.Builder: Checks whether the 'holdingIdentity' field has an active Builder instance The holding identity that the certificate is used by.
hasHoldingIdentityBuilder() - function in net.corda.data.p2p.HostedIdentityEntry.Builder: Checks whether the 'holdingIdentity' field has an active Builder instance The Holding identity hosted in this node
hasHoldingIdentityBuilder() - function in net.corda.data.persistence.EntityRequest.Builder: Checks whether the 'holdingIdentity' field has an active Builder instance The holding identity of the user making the db request.
hasHoldingIdentityBuilder() - function in net.corda.data.uniqueness.UniquenessCheckRequestAvro.Builder: Checks whether the 'holdingIdentity' field has an active Builder instance The holding identity of the virtual node making the uniqueness check request.
hasHoldingIdentityBuilder() - function in net.corda.data.virtualnode.VirtualNodeCreateResponse.Builder: Checks whether the 'holdingIdentity' field has an active Builder instance
hasHoldingIdentityBuilder() - function in net.corda.data.virtualnode.VirtualNodeInfo.Builder: Checks whether the 'holdingIdentity' field has an active Builder instance
hasHoldingIdentityBuilder() - function in net.corda.data.virtualnode.VirtualNodeUpgradeResponse.Builder: Checks whether the 'holdingIdentity' field has an active Builder instance
hasHoldingIdentityBuilder() - function in net.corda.ledger.utxo.verification.TransactionVerificationRequest.Builder: Checks whether the 'holdingIdentity' field has an active Builder instance The holding identity of the user making the request.
hasHoldingIdentityId() - function in net.corda.data.membership.async.request.RegistrationAsyncRequest.Builder: Checks whether the 'holdingIdentityId' field has been set.
hasHoldingIdentityId() - function in net.corda.data.membership.common.RegistrationRequestDetails.Builder: Checks whether the 'holdingIdentityId' field has been set.
hasHoldingIdentityId() - function in net.corda.data.membership.rpc.request.MGMGroupPolicyRequest.Builder: Checks whether the 'holdingIdentityId' field has been set.
hasHoldingIdentityShortHash() - function in net.corda.data.virtualnode.VirtualNodeStateChangeRequest.Builder: Checks whether the 'holdingIdentityShortHash' field has been set.
hasHoldingIdentityShortHash() - function in net.corda.data.virtualnode.VirtualNodeStateChangeResponse.Builder: Checks whether the 'holdingIdentityShortHash' field has been set.
hasHoldingIdentityShortHashes() - function in net.corda.data.virtualnode.VirtualNodeDBResetRequest.Builder: Checks whether the 'holdingIdentityShortHashes' field has been set.
hasHoldingIdentityShortHashes() - function in net.corda.data.virtualnode.VirtualNodeDBResetResponse.Builder: Checks whether the 'holdingIdentityShortHashes' field has been set.
hasHsmAlias() - function in net.corda.data.crypto.wire.CryptoSigningKey.Builder: Checks whether the 'hsmAlias' field has been set.
hasHsmConnectionId() - function in net.corda.data.virtualnode.VirtualNodeCreateResponse.Builder: Checks whether the 'hsmConnectionId' field has been set.
hasHsmConnectionId() - function in net.corda.data.virtualnode.VirtualNodeInfo.Builder: Checks whether the 'hsmConnectionId' field has been set.
hasHsmConnectionId() - function in net.corda.data.virtualnode.VirtualNodeUpgradeResponse.Builder: Checks whether the 'hsmConnectionId' field has been set.
hasHsmId() - function in net.corda.data.crypto.wire.hsm.HSMAssociationInfo.Builder: Checks whether the 'hsmId' field has been set.
hasHsmId() - function in net.corda.data.crypto.wire.ops.rpc.commands.GenerateWrappingKeyRpcCommand.Builder: Checks whether the 'hsmId' field has been set.
hasId() - function in net.corda.data.crypto.wire.CryptoSigningKey.Builder: Checks whether the 'id' field has been set.
hasId() - function in net.corda.data.crypto.wire.hsm.HSMAssociationInfo.Builder: Checks whether the 'id' field has been set.
hasId() - function in net.corda.data.flow.FlowKey.Builder: Checks whether the 'id' field has been set.
hasId() - function in net.corda.data.ledger.persistence.FindSignedLedgerTransaction.Builder: Checks whether the 'id' field has been set.
hasId() - function in net.corda.data.ledger.persistence.FindTransaction.Builder: Checks whether the 'id' field has been set.
hasId() - function in net.corda.data.ledger.persistence.UpdateTransactionStatus.Builder: Checks whether the 'id' field has been set.
hasId() - function in net.corda.data.membership.preauth.PreAuthToken.Builder: Checks whether the 'id' field has been set.
hasId() - function in net.corda.data.p2p.gateway.GatewayMessage.Builder: Checks whether the 'id' field has been set.
hasId() - function in net.corda.data.p2p.gateway.GatewayResponse.Builder: Checks whether the 'id' field has been set.
hasId() - function in net.corda.data.packaging.CpiMetadata.Builder: Checks whether the 'id' field has been set.
hasId() - function in net.corda.data.packaging.CpkMetadata.Builder: Checks whether the 'id' field has been set.
hasId() - function in net.corda.data.permissions.Group.Builder: Checks whether the 'id' field has been set.
hasId() - function in net.corda.data.permissions.Permission.Builder: Checks whether the 'id' field has been set.
hasId() - function in net.corda.data.permissions.Property.Builder: Checks whether the 'id' field has been set.
hasId() - function in net.corda.data.permissions.Role.Builder: Checks whether the 'id' field has been set.
hasId() - function in net.corda.data.permissions.User.Builder: Checks whether the 'id' field has been set.
hasId() - function in net.corda.data.permissions.summary.PermissionSummary.Builder: Checks whether the 'id' field has been set.
hasIdBuilder() - function in net.corda.data.packaging.CpiMetadata.Builder: Checks whether the 'id' field has an active Builder instance
hasIdBuilder() - function in net.corda.data.packaging.CpkMetadata.Builder: Checks whether the 'id' field has an active Builder instance
hasIdentifier() - function in net.corda.data.packaging.CpiSegmentRequest.Builder: Checks whether the 'identifier' field has been set.
hasIdentifierBuilder() - function in net.corda.data.packaging.CpiSegmentRequest.Builder: Checks whether the 'identifier' field has an active Builder instance
hasIdentity() - function in net.corda.data.flow.FlowKey.Builder: Checks whether the 'identity' field has been set.
hasIdentity() - function in net.corda.data.flow.FlowStartContext.Builder: Checks whether the 'identity' field has been set.
hasIdentityBuilder() - function in net.corda.data.flow.FlowKey.Builder: Checks whether the 'identity' field has an active Builder instance Identity of the party executing the flow.
hasIdentityBuilder() - function in net.corda.data.flow.FlowStartContext.Builder: Checks whether the 'identity' field has an active Builder instance The identity of the party executing the flow.
hasIds() - function in net.corda.data.flow.event.mapper.ExecuteCleanup.Builder: Checks whether the 'ids' field has been set.
hasIds() - function in net.corda.data.ledger.persistence.FindTransactionIdsAndStatuses.Builder: Checks whether the 'ids' field has been set.
hasIds() - function in net.corda.data.persistence.DeleteEntitiesById.Builder: Checks whether the 'ids' field has been set.
hasIds() - function in net.corda.data.persistence.FindEntities.Builder: Checks whether the 'ids' field has been set.
hasIndex() - function in net.corda.data.ledger.persistence.UtxoTransactionOutput.Builder: Checks whether the 'index' field has been set.
hasIndex() - function in net.corda.data.ledger.utxo.StateRef.Builder: Checks whether the 'index' field has been set.
hasIndex() - function in net.corda.data.membership.state.CompletedCommandMetadata.Builder: Checks whether the 'index' field has been set.
hasInfo() - function in net.corda.data.ledger.persistence.UtxoTransactionOutput.Builder: Checks whether the 'info' field has been set.
hasInfo() - function in net.corda.data.membership.db.request.command.UpdateStaticNetworkInfo.Builder: Checks whether the 'info' field has been set.
hasInfo() - function in net.corda.data.membership.db.response.query.StaticNetworkInfoQueryResponse.Builder: Checks whether the 'info' field has been set.
hasInfoBuilder() - function in net.corda.data.membership.db.request.command.UpdateStaticNetworkInfo.Builder: Checks whether the 'info' field has an active Builder instance Updated static network info to persist.
hasInfoBuilder() - function in net.corda.data.membership.db.response.query.StaticNetworkInfoQueryResponse.Builder: Checks whether the 'info' field has an active Builder instance The static network information if available.
hasInitialHashedPassword() - function in net.corda.data.permissions.management.user.CreateUserRequest.Builder: Checks whether the 'initialHashedPassword' field has been set.
hasInitialPlatformVersion() - function in net.corda.data.flow.state.checkpoint.Checkpoint.Builder: Checks whether the 'initialPlatformVersion' field has been set.
hasInitiated() - function in net.corda.data.flow.state.checkpoint.FlowStackItemSession.Builder: Checks whether the 'initiated' field has been set.
hasInitiatedBy() - function in net.corda.data.flow.FlowStartContext.Builder: Checks whether the 'initiatedBy' field has been set.
hasInitiatedByBuilder() - function in net.corda.data.flow.FlowStartContext.Builder: Checks whether the 'initiatedBy' field has an active Builder instance The identity of the party that initiated the flow.
hasInitiatedIdentity() - function in net.corda.data.flow.event.SessionEvent.Builder: Checks whether the 'initiatedIdentity' field has been set.
hasInitiatedIdentityBuilder() - function in net.corda.data.flow.event.SessionEvent.Builder: Checks whether the 'initiatedIdentity' field has an active Builder instance Identity of party in the session who was initiated.
hasInitiatingIdentity() - function in net.corda.data.flow.event.SessionEvent.Builder: Checks whether the 'initiatingIdentity' field has been set.
hasInitiatingIdentityBuilder() - function in net.corda.data.flow.event.SessionEvent.Builder: Checks whether the 'initiatingIdentity' field has an active Builder instance Identity of party who started a session.
hasInitiatorCertificate() - function in net.corda.data.p2p.crypto.internal.InitiatorEncryptedExtensions.Builder: Checks whether the 'initiatorCertificate' field has been set.
hasInitiatorEncryptedExtensions() - function in net.corda.data.p2p.crypto.internal.InitiatorHandshakePayload.Builder: Checks whether the 'initiatorEncryptedExtensions' field has been set.
hasInitiatorEncryptedExtensionsBuilder() - function in net.corda.data.p2p.crypto.internal.InitiatorHandshakePayload.Builder: Checks whether the 'initiatorEncryptedExtensions' field has an active Builder instance
hasInitiatorFinished() - function in net.corda.data.p2p.crypto.internal.InitiatorHandshakePayload.Builder: Checks whether the 'initiatorFinished' field has been set.
hasInitiatorPartyVerify() - function in net.corda.data.p2p.crypto.internal.InitiatorHandshakePayload.Builder: Checks whether the 'initiatorPartyVerify' field has been set.
hasInitiatorPublicKey() - function in net.corda.data.p2p.crypto.InitiatorHelloMessage.Builder: Checks whether the 'initiatorPublicKey' field has been set.
hasInitiatorPublicKeyHash() - function in net.corda.data.p2p.crypto.internal.InitiatorHandshakeIdentity.Builder: Checks whether the 'initiatorPublicKeyHash' field has been set.
hasInitiatorPublicKeyHash() - function in net.corda.data.p2p.crypto.internal.InitiatorHandshakePayload.Builder: Checks whether the 'initiatorPublicKeyHash' field has been set.
hasInitiatorType() - function in net.corda.data.flow.FlowStartContext.Builder: Checks whether the 'initiatorType' field has been set.
hasInitiatorType() - function in net.corda.data.flow.output.FlowStatus.Builder: Checks whether the 'initiatorType' field has been set.
hasInputStates() - function in net.corda.data.uniqueness.UniquenessCheckRequestAvro.Builder: Checks whether the 'inputStates' field has been set.
hasIsInitiatingFlow() - function in net.corda.data.flow.state.checkpoint.FlowStackItem.Builder: Checks whether the 'isInitiatingFlow' field has been set.
hasIssuerHash() - function in net.corda.data.ledger.utxo.token.selection.key.TokenPoolCacheKey.Builder: Checks whether the 'issuerHash' field has been set.
hasItems() - function in net.corda.data.KeyValuePairList.Builder: Checks whether the 'items' field has been set.
hasKey() - function in net.corda.data.KeyValuePair.Builder: Checks whether the 'key' field has been set.
hasKey() - function in net.corda.data.crypto.wire.CryptoPublicKey.Builder: Checks whether the 'key' field has been set.
hasKey() - function in net.corda.data.deadletter.StateAndEventDeadLetterRecord.Builder: Checks whether the 'key' field has been set.
hasKey() - function in net.corda.data.flow.event.external.ExternalEvent.Builder: Checks whether the 'key' field has been set.
hasKey() - function in net.corda.data.flow.output.FlowStatus.Builder: Checks whether the 'key' field has been set.
hasKey() - function in net.corda.data.membership.p2p.UnauthenticatedRegistrationRequestHeader.Builder: Checks whether the 'key' field has been set.
hasKey() - function in net.corda.data.p2p.AuthenticatedMessageAndKey.Builder: Checks whether the 'key' field has been set.
hasKey() - function in net.corda.data.permissions.Property.Builder: Checks whether the 'key' field has been set.
hasKeyBuilder() - function in net.corda.data.flow.output.FlowStatus.Builder: Checks whether the 'key' field has an active Builder instance The unique ID for the status
hasKeyIds() - function in net.corda.data.crypto.wire.ops.rpc.queries.ByIdsRpcQuery.Builder: Checks whether the 'keyIds' field has been set.
hasKeys() - function in net.corda.data.crypto.wire.CryptoSigningKeys.Builder: Checks whether the 'keys' field has been set.
hasKeys() - function in net.corda.data.crypto.wire.ops.flow.queries.FilterMyKeysFlowQuery.Builder: Checks whether the 'keys' field has been set.
hasLabel() - function in net.corda.data.membership.db.request.command.PersistApprovalRule.Builder: Checks whether the 'label' field has been set.
hasLastBlockCompletedTimestamp() - function in net.corda.data.ledger.utxo.token.selection.data.TokenFullSyncState.Builder: Checks whether the 'lastBlockCompletedTimestamp' field has been set.
hasLastChangeDetails() - function in net.corda.data.permissions.Group.Builder: Checks whether the 'lastChangeDetails' field has been set.
hasLastChangeDetails() - function in net.corda.data.permissions.Permission.Builder: Checks whether the 'lastChangeDetails' field has been set.
hasLastChangeDetails() - function in net.corda.data.permissions.Property.Builder: Checks whether the 'lastChangeDetails' field has been set.
hasLastChangeDetails() - function in net.corda.data.permissions.Role.Builder: Checks whether the 'lastChangeDetails' field has been set.
hasLastChangeDetails() - function in net.corda.data.permissions.User.Builder: Checks whether the 'lastChangeDetails' field has been set.
hasLastChangeDetailsBuilder() - function in net.corda.data.permissions.Group.Builder: Checks whether the 'lastChangeDetails' field has an active Builder instance
hasLastChangeDetailsBuilder() - function in net.corda.data.permissions.Permission.Builder: Checks whether the 'lastChangeDetails' field has an active Builder instance
hasLastChangeDetailsBuilder() - function in net.corda.data.permissions.Property.Builder: Checks whether the 'lastChangeDetails' field has an active Builder instance
hasLastChangeDetailsBuilder() - function in net.corda.data.permissions.Role.Builder: Checks whether the 'lastChangeDetails' field has an active Builder instance
hasLastChangeDetailsBuilder() - function in net.corda.data.permissions.User.Builder: Checks whether the 'lastChangeDetails' field has an active Builder instance
hasLastFailedOn() - function in net.corda.data.membership.db.request.async.MembershipPersistenceAsyncRequestState.Builder: Checks whether the 'lastFailedOn' field has been set.
hasLastFailureTimestamp() - function in net.corda.data.flow.state.checkpoint.RetryState.Builder: Checks whether the 'lastFailureTimestamp' field has been set.
hasLastProcessedSequenceNum() - function in net.corda.data.flow.state.session.SessionProcessState.Builder: Checks whether the 'lastProcessedSequenceNum' field has been set.
hasLastReceivedMessageTime() - function in net.corda.data.flow.state.session.SessionState.Builder: Checks whether the 'lastReceivedMessageTime' field has been set.
hasLastUpdateTimestamp() - function in net.corda.data.flow.output.FlowStatus.Builder: Checks whether the 'lastUpdateTimestamp' field has been set.
hasLastUpdateTimestamp() - function in net.corda.data.permissions.summary.UserPermissionSummary.Builder: Checks whether the 'lastUpdateTimestamp' field has been set.
hasLatestUpdateTimestamp() - function in net.corda.data.virtualnode.VirtualNodeOperationStatus.Builder: Checks whether the 'latestUpdateTimestamp' field has been set.
hasLedgerType() - function in net.corda.data.ledger.persistence.LedgerPersistenceRequest.Builder: Checks whether the 'ledgerType' field has been set.
hasLibraries() - function in net.corda.data.packaging.CpkMetadata.Builder: Checks whether the 'libraries' field has been set.
hasLicense() - function in net.corda.data.packaging.CorDappManifest.Builder: Checks whether the 'license' field has been set.
hasLimit() - function in net.corda.data.membership.db.request.query.QueryRegistrationRequests.Builder: Checks whether the 'limit' field has been set.
hasLimit() - function in net.corda.data.persistence.FindAll.Builder: Checks whether the 'limit' field has been set.
hasLimit() - function in net.corda.data.persistence.FindWithNamedQuery.Builder: Checks whether the 'limit' field has been set.
hasLoginName() - function in net.corda.data.permissions.User.Builder: Checks whether the 'loginName' field has been set.
hasLoginName() - function in net.corda.data.permissions.management.user.AddRoleToUserRequest.Builder: Checks whether the 'loginName' field has been set.
hasLoginName() - function in net.corda.data.permissions.management.user.CreateUserRequest.Builder: Checks whether the 'loginName' field has been set.
hasLoginName() - function in net.corda.data.permissions.management.user.RemoveRoleFromUserRequest.Builder: Checks whether the 'loginName' field has been set.
hasLoginName() - function in net.corda.data.permissions.summary.UserPermissionSummary.Builder: Checks whether the 'loginName' field has been set.
hasMagic() - function in net.corda.data.AvroEnvelope.Builder: Checks whether the 'magic' field has been set.
hasMainBundle() - function in net.corda.data.packaging.CpkMetadata.Builder: Checks whether the 'mainBundle' field has been set.
hasMajor() - function in net.corda.data.packaging.CpkFormatVersion.Builder: Checks whether the 'major' field has been set.
hasMajorVersion() - function in net.corda.data.config.ConfigurationSchemaVersion.Builder: Checks whether the 'majorVersion' field has been set.
hasManifest() - function in net.corda.data.packaging.CpkMetadata.Builder: Checks whether the 'manifest' field has been set.
hasManifestBuilder() - function in net.corda.data.packaging.CpkMetadata.Builder: Checks whether the 'manifest' field has an active Builder instance
hasMarker() - function in net.corda.data.p2p.markers.AppMessageMarker.Builder: Checks whether the 'marker' field has been set.
hasMasterKeyAlias() - function in net.corda.data.crypto.wire.CryptoSigningKey.Builder: Checks whether the 'masterKeyAlias' field has been set.
hasMasterKeyAlias() - function in net.corda.data.crypto.wire.hsm.HSMAssociationInfo.Builder: Checks whether the 'masterKeyAlias' field has been set.
hasMasterKeyAlias() - function in net.corda.data.crypto.wire.ops.rpc.commands.GenerateWrappingKeyRpcCommand.Builder: Checks whether the 'masterKeyAlias' field has been set.
hasMaxFlowSleepDuration() - function in net.corda.data.flow.state.checkpoint.PipelineState.Builder: Checks whether the 'maxFlowSleepDuration' field has been set.
hasMaxMessageSize() - function in net.corda.data.p2p.crypto.internal.InitiatorEncryptedExtensions.Builder: Checks whether the 'maxMessageSize' field has been set.
hasMaxMessageSize() - function in net.corda.data.p2p.crypto.internal.ResponderEncryptedExtensions.Builder: Checks whether the 'maxMessageSize' field has been set.
hasMember() - function in net.corda.data.membership.command.registration.member.PersistMemberRegistrationState.Builder: Checks whether the 'member' field has been set.
hasMember() - function in net.corda.data.membership.command.registration.mgm.CheckForPendingRegistration.Builder: Checks whether the 'member' field has been set.
hasMember() - function in net.corda.data.membership.command.registration.mgm.QueueRegistration.Builder: Checks whether the 'member' field has been set.
hasMember() - function in net.corda.data.membership.command.synchronisation.SynchronisationMetaData.Builder: Checks whether the 'member' field has been set.
hasMember() - function in net.corda.data.membership.db.request.command.UpdateMemberAndRegistrationRequestToApproved.Builder: Checks whether the 'member' field has been set.
hasMember() - function in net.corda.data.membership.db.request.command.UpdateMemberAndRegistrationRequestToDeclined.Builder: Checks whether the 'member' field has been set.
hasMemberBuilder() - function in net.corda.data.membership.command.registration.member.PersistMemberRegistrationState.Builder: Checks whether the 'member' field has an active Builder instance The member to persist the state.
hasMemberBuilder() - function in net.corda.data.membership.command.registration.mgm.CheckForPendingRegistration.Builder: Checks whether the 'member' field has an active Builder instance Holding identity of the registering member as provided during P2P communication.
hasMemberBuilder() - function in net.corda.data.membership.command.registration.mgm.QueueRegistration.Builder: Checks whether the 'member' field has an active Builder instance Holding identity of the requesting member.
hasMemberBuilder() - function in net.corda.data.membership.command.synchronisation.SynchronisationMetaData.Builder: Checks whether the 'member' field has an active Builder instance Holding identity of the member receiving the membership updates
hasMemberBuilder() - function in net.corda.data.membership.db.request.command.UpdateMemberAndRegistrationRequestToApproved.Builder: Checks whether the 'member' field has an active Builder instance Holding identity of the member to update the state.
hasMemberBuilder() - function in net.corda.data.membership.db.request.command.UpdateMemberAndRegistrationRequestToDeclined.Builder: Checks whether the 'member' field has an active Builder instance Holding identity of the member to update the state.
hasMemberContext() - function in net.corda.data.membership.PersistentMemberInfo.Builder: Checks whether the 'memberContext' field has been set.
hasMemberContext() - function in net.corda.data.membership.SignedMemberInfo.Builder: Checks whether the 'memberContext' field has been set.
hasMemberContext() - function in net.corda.data.membership.p2p.MembershipRegistrationRequest.Builder: Checks whether the 'memberContext' field has been set.
hasMemberContextBuilder() - function in net.corda.data.membership.PersistentMemberInfo.Builder: Checks whether the 'memberContext' field has an active Builder instance Deprecated field, signedMemberContext should be used instead.
hasMemberContextBuilder() - function in net.corda.data.membership.SignedMemberInfo.Builder: Checks whether the 'memberContext' field has an active Builder instance Signed member provided data in MemberInfo serialised as byte array by using KeyValuePairList.
hasMemberContextBuilder() - function in net.corda.data.membership.p2p.MembershipRegistrationRequest.Builder: Checks whether the 'memberContext' field has an active Builder instance Member provided data in MemberInfo which has been signed by the registering member.
hasMemberInfo() - function in net.corda.data.membership.db.response.command.ActivateMemberResponse.Builder: Checks whether the 'memberInfo' field has been set.
hasMemberInfo() - function in net.corda.data.membership.db.response.command.SuspendMemberResponse.Builder: Checks whether the 'memberInfo' field has been set.
hasMemberInfo() - function in net.corda.data.membership.db.response.query.UpdateMemberAndRegistrationRequestResponse.Builder: Checks whether the 'memberInfo' field has been set.
hasMemberInfoBuilder() - function in net.corda.data.membership.db.response.command.ActivateMemberResponse.Builder: Checks whether the 'memberInfo' field has an active Builder instance The updated MemberInfo after activating the member.
hasMemberInfoBuilder() - function in net.corda.data.membership.db.response.command.SuspendMemberResponse.Builder: Checks whether the 'memberInfo' field has an active Builder instance The updated MemberInfo after suspending the member.
hasMemberInfoBuilder() - function in net.corda.data.membership.db.response.query.UpdateMemberAndRegistrationRequestResponse.Builder: Checks whether the 'memberInfo' field has an active Builder instance Member Info representing the member after the update.
hasMemberProvidedContext() - function in net.corda.data.membership.common.RegistrationRequestDetails.Builder: Checks whether the 'memberProvidedContext' field has been set.
hasMemberProvidedContextBuilder() - function in net.corda.data.membership.common.RegistrationRequestDetails.Builder: Checks whether the 'memberProvidedContext' field has an active Builder instance Member provided data in MemberInfo which has been signed by the registering member.
hasMemberRegistrationRequest() - function in net.corda.data.membership.command.registration.mgm.QueueRegistration.Builder: Checks whether the 'memberRegistrationRequest' field has been set.
hasMemberRegistrationRequestBuilder() - function in net.corda.data.membership.command.registration.mgm.QueueRegistration.Builder: Checks whether the 'memberRegistrationRequest' field has an active Builder instance The full registration request as received from a registering member.
hasMembers() - function in net.corda.data.membership.db.request.command.PersistMemberInfo.Builder: Checks whether the 'members' field has been set.
hasMembers() - function in net.corda.data.membership.db.response.query.MemberInfoQueryResponse.Builder: Checks whether the 'members' field has been set.
hasMembersHash() - function in net.corda.data.membership.p2p.MembershipSyncRequest.Builder: Checks whether the 'membersHash' field has been set.
hasMembersHashBuilder() - function in net.corda.data.membership.p2p.MembershipSyncRequest.Builder: Checks whether the 'membersHash' field has an active Builder instance Hash value to help validate the member requesting for sync.
hasMembershipPackage() - function in net.corda.data.membership.command.synchronisation.member.ProcessMembershipUpdates.Builder: Checks whether the 'membershipPackage' field has been set.
hasMembershipPackageBuilder() - function in net.corda.data.membership.command.synchronisation.member.ProcessMembershipUpdates.Builder: Checks whether the 'membershipPackage' field has an active Builder instance Data package distributed by the MGM containing membership updates.
hasMemberships() - function in net.corda.data.membership.p2p.MembershipPackage.Builder: Checks whether the 'memberships' field has been set.
hasMemberships() - function in net.corda.data.membership.p2p.SignedMemberships.Builder: Checks whether the 'memberships' field has been set.
hasMembershipsBuilder() - function in net.corda.data.membership.p2p.MembershipPackage.Builder: Checks whether the 'memberships' field has an active Builder instance Membership updates.
hasMemberSignature() - function in net.corda.data.membership.PersistentSignedMemberInfo.Builder: Checks whether the 'memberSignature' field has been set.
hasMemberSignatureBuilder() - function in net.corda.data.membership.PersistentSignedMemberInfo.Builder: Checks whether the 'memberSignature' field has an active Builder instance Signature of the member over the memberContext.
hasMemberSignatureSpec() - function in net.corda.data.membership.PersistentSignedMemberInfo.Builder: Checks whether the 'memberSignatureSpec' field has been set.
hasMemberSignatureSpecBuilder() - function in net.corda.data.membership.PersistentSignedMemberInfo.Builder: Checks whether the 'memberSignatureSpec' field has an active Builder instance Signature spec of member signature.
hasMembersSignatures() - function in net.corda.data.membership.db.response.query.MemberSignatureQueryResponse.Builder: Checks whether the 'membersSignatures' field has been set.
hasMessage() - function in net.corda.data.chunking.UploadStatus.Builder: Checks whether the 'message' field has been set.
hasMessage() - function in net.corda.data.p2p.AuthenticatedMessageAndKey.Builder: Checks whether the 'message' field has been set.
hasMessage() - function in net.corda.data.p2p.AuthenticatedMessageDeliveryState.Builder: Checks whether the 'message' field has been set.
hasMessage() - function in net.corda.data.p2p.DataMessagePayload.Builder: Checks whether the 'message' field has been set.
hasMessage() - function in net.corda.data.p2p.app.AppMessage.Builder: Checks whether the 'message' field has been set.
hasMessage() - function in net.corda.data.p2p.markers.LinkManagerDiscardedMarker.Builder: Checks whether the 'message' field has been set.
hasMessage() - function in net.corda.data.p2p.markers.LinkManagerProcessedMarker.Builder: Checks whether the 'message' field has been set.
hasMessageBuilder() - function in net.corda.data.p2p.AuthenticatedMessageAndKey.Builder: Checks whether the 'message' field has an active Builder instance
hasMessageBuilder() - function in net.corda.data.p2p.AuthenticatedMessageDeliveryState.Builder: Checks whether the 'message' field has an active Builder instance A copy of the original message in P2P_OUT_TOPIC.
hasMessageBuilder() - function in net.corda.data.p2p.markers.LinkManagerDiscardedMarker.Builder: Checks whether the 'message' field has an active Builder instance A copy of the original message in P2P_OUT_TOPIC.
hasMessageBuilder() - function in net.corda.data.p2p.markers.LinkManagerProcessedMarker.Builder: Checks whether the 'message' field has an active Builder instance A copy of the original message in P2P_OUT_TOPIC.
hasMessageDirection() - function in net.corda.data.flow.event.SessionEvent.Builder: Checks whether the 'messageDirection' field has been set.
hasMessageId() - function in net.corda.data.p2p.AuthenticatedMessageAck.Builder: Checks whether the 'messageId' field has been set.
hasMessageId() - function in net.corda.data.p2p.app.AuthenticatedMessageHeader.Builder: Checks whether the 'messageId' field has been set.
hasMessageId() - function in net.corda.data.p2p.app.InboundUnauthenticatedMessageHeader.Builder: Checks whether the 'messageId' field has been set.
hasMessageId() - function in net.corda.data.p2p.app.OutboundUnauthenticatedMessageHeader.Builder: Checks whether the 'messageId' field has been set.
hasMessageType() - function in net.corda.data.p2p.crypto.CommonHeader.Builder: Checks whether the 'messageType' field has been set.
hasMetadata() - function in net.corda.data.persistence.EntityResponse.Builder: Checks whether the 'metadata' field has been set.
hasMetadataBuilder() - function in net.corda.data.persistence.EntityResponse.Builder: Checks whether the 'metadata' field has an active Builder instance Metadata returned from the execution of the persistence operation
hasMgm() - function in net.corda.data.membership.actions.request.DistributeGroupParameters.Builder: Checks whether the 'mgm' field has been set.
hasMgm() - function in net.corda.data.membership.actions.request.DistributeMemberInfo.Builder: Checks whether the 'mgm' field has been set.
hasMgm() - function in net.corda.data.membership.command.registration.mgm.CheckForPendingRegistration.Builder: Checks whether the 'mgm' field has been set.
hasMgm() - function in net.corda.data.membership.command.registration.mgm.QueueRegistration.Builder: Checks whether the 'mgm' field has been set.
hasMgm() - function in net.corda.data.membership.command.synchronisation.SynchronisationMetaData.Builder: Checks whether the 'mgm' field has been set.
hasMgm() - function in net.corda.data.membership.p2p.UnauthenticatedRegistrationRequestHeader.Builder: Checks whether the 'mgm' field has been set.
hasMgm() - function in net.corda.data.membership.state.RegistrationState.Builder: Checks whether the 'mgm' field has been set.
hasMgmBuilder() - function in net.corda.data.membership.actions.request.DistributeGroupParameters.Builder: Checks whether the 'mgm' field has an active Builder instance The membership group manager of the group.
hasMgmBuilder() - function in net.corda.data.membership.actions.request.DistributeMemberInfo.Builder: Checks whether the 'mgm' field has an active Builder instance The membership group manager of the group.
hasMgmBuilder() - function in net.corda.data.membership.command.registration.mgm.CheckForPendingRegistration.Builder: Checks whether the 'mgm' field has an active Builder instance Holding identity of the MGM.
hasMgmBuilder() - function in net.corda.data.membership.command.registration.mgm.QueueRegistration.Builder: Checks whether the 'mgm' field has an active Builder instance Holding identity of the target MGM.
hasMgmBuilder() - function in net.corda.data.membership.command.synchronisation.SynchronisationMetaData.Builder: Checks whether the 'mgm' field has an active Builder instance Holding identity of the MGM.
hasMgmBuilder() - function in net.corda.data.membership.p2p.UnauthenticatedRegistrationRequestHeader.Builder: Checks whether the 'mgm' field has an active Builder instance Holding identity of the target MGM.
hasMgmBuilder() - function in net.corda.data.membership.state.RegistrationState.Builder: Checks whether the 'mgm' field has an active Builder instance Holding identity of the MGM.
hasMgmContext() - function in net.corda.data.membership.PersistentMemberInfo.Builder: Checks whether the 'mgmContext' field has been set.
hasMgmContext() - function in net.corda.data.membership.SignedMemberInfo.Builder: Checks whether the 'mgmContext' field has been set.
hasMgmContextBuilder() - function in net.corda.data.membership.PersistentMemberInfo.Builder: Checks whether the 'mgmContext' field has an active Builder instance Deprecated field, serializedMgmContext should be used instead.
hasMgmContextBuilder() - function in net.corda.data.membership.SignedMemberInfo.Builder: Checks whether the 'mgmContext' field has an active Builder instance Signed MGM provided data in MemberInfo serialised as byte array by using KeyValuePairList.
hasMgmGroupId() - function in net.corda.data.virtualnode.VirtualNodeCreateResponse.Builder: Checks whether the 'mgmGroupId' field has been set.
hasMgmGroupId() - function in net.corda.data.virtualnode.VirtualNodeUpgradeResponse.Builder: Checks whether the 'mgmGroupId' field has been set.
hasMgmPrivateSigningKey() - function in net.corda.data.membership.StaticNetworkInfo.Builder: Checks whether the 'mgmPrivateSigningKey' field has been set.
hasMgmPublicSigningKey() - function in net.corda.data.membership.StaticNetworkInfo.Builder: Checks whether the 'mgmPublicSigningKey' field has been set.
hasMgmSignature() - function in net.corda.data.membership.SignedGroupParameters.Builder: Checks whether the 'mgmSignature' field has been set.
hasMgmSignatureBuilder() - function in net.corda.data.membership.SignedGroupParameters.Builder: Checks whether the 'mgmSignature' field has an active Builder instance MGM signature over the serialised group parameters.
hasMgmSignatureSpec() - function in net.corda.data.membership.SignedGroupParameters.Builder: Checks whether the 'mgmSignatureSpec' field has been set.
hasMgmSignatureSpecBuilder() - function in net.corda.data.membership.SignedGroupParameters.Builder: Checks whether the 'mgmSignatureSpec' field has an active Builder instance Signature spec for the MGM signature.
hasMinimumGroupParametersEpoch() - function in net.corda.data.membership.actions.request.DistributeGroupParameters.Builder: Checks whether the 'minimumGroupParametersEpoch' field has been set.
hasMinimumGroupParametersEpoch() - function in net.corda.data.membership.actions.request.DistributeMemberInfo.Builder: Checks whether the 'minimumGroupParametersEpoch' field has been set.
hasMinimumUpdatedMemberSerial() - function in net.corda.data.membership.actions.request.DistributeMemberInfo.Builder: Checks whether the 'minimumUpdatedMemberSerial' field has been set.
hasMinor() - function in net.corda.data.packaging.CpkFormatVersion.Builder: Checks whether the 'minor' field has been set.
hasMinorVersion() - function in net.corda.data.config.ConfigurationSchemaVersion.Builder: Checks whether the 'minorVersion' field has been set.
hasMinPlatformVersion() - function in net.corda.data.packaging.CorDappManifest.Builder: Checks whether the 'minPlatformVersion' field has been set.
hasMode() - function in net.corda.data.ledger.utxo.token.selection.state.TokenSyncState.Builder: Checks whether the 'mode' field has been set.
hasMode() - function in net.corda.data.p2p.gateway.certificates.RevocationCheckRequest.Builder: Checks whether the 'mode' field has been set.
hasName() - function in net.corda.data.packaging.CpiIdentifier.Builder: Checks whether the 'name' field has been set.
hasName() - function in net.corda.data.packaging.CpkIdentifier.Builder: Checks whether the 'name' field has been set.
hasName() - function in net.corda.data.permissions.Group.Builder: Checks whether the 'name' field has been set.
hasName() - function in net.corda.data.permissions.Role.Builder: Checks whether the 'name' field has been set.
hasName() - function in net.corda.data.scheduler.ScheduledTaskTrigger.Builder: Checks whether the 'name' field has been set.
hasName() - function in net.corda.ledger.utxo.verification.CordaPackageSummary.Builder: Checks whether the 'name' field has been set.
hasNewState() - function in net.corda.data.virtualnode.VirtualNodeStateChangeRequest.Builder: Checks whether the 'newState' field has been set.
hasNewStatus() - function in net.corda.data.membership.p2p.SetOwnRegistrationStatus.Builder: Checks whether the 'newStatus' field has been set.
hasNewStatus() - function in net.corda.data.membership.p2p.v2.SetOwnRegistrationStatus.Builder: Checks whether the 'newStatus' field has been set.
hasNext() - function in net.corda.v5.application.persistence.PagedQuery.ResultSet: Returns true if the ResultSet can retrieve more results by re-executing the query with the offset increased to the next's page's offset.
hasNextBlockStartOffset() - function in net.corda.data.ledger.utxo.token.selection.data.TokenFullSyncState.Builder: Checks whether the 'nextBlockStartOffset' field has been set.
hasNextBlockStartOffset() - function in net.corda.data.ledger.utxo.token.selection.data.TokenPoolPeriodicSyncState.Builder: Checks whether the 'nextBlockStartOffset' field has been set.
hasNextTryAt() - function in net.corda.data.membership.async.request.RetriableFailure.Builder: Checks whether the 'nextTryAt' field has been set.
hasNextWakeup() - function in net.corda.data.ledger.utxo.token.selection.state.TokenSyncState.Builder: Checks whether the 'nextWakeup' field has been set.
hasNotary() - function in net.corda.data.membership.db.request.command.AddNotaryToGroupParameters.Builder: Checks whether the 'notary' field has been set.
hasNotaryBuilder() - function in net.corda.data.membership.db.request.command.AddNotaryToGroupParameters.Builder: Checks whether the 'notary' field has an active Builder instance Notary virtual node to be added to the group parameters
hasNotaryX500Name() - function in net.corda.data.ledger.utxo.token.selection.key.TokenPoolCacheKey.Builder: Checks whether the 'notaryX500Name' field has been set.
hasNumberOfHashFunctions() - function in net.corda.data.sync.BloomFilter.Builder: Checks whether the 'numberOfHashFunctions' field has been set.
hasNumberOfRemainingRetries() - function in net.corda.data.membership.async.request.RetriableFailure.Builder: Checks whether the 'numberOfRemainingRetries' field has been set.
hasNumberOfRetriesSoFar() - function in net.corda.data.membership.command.registration.mgm.CheckForPendingRegistration.Builder: Checks whether the 'numberOfRetriesSoFar' field has been set.
hasNumberOfRetriesSoFar() - function in net.corda.data.membership.command.registration.mgm.QueueRegistration.Builder: Checks whether the 'numberOfRetriesSoFar' field has been set.
hasNumberOfRetriesSoFar() - function in net.corda.data.membership.db.request.async.MembershipPersistenceAsyncRequestState.Builder: Checks whether the 'numberOfRetriesSoFar' field has been set.
hasNumOutputStates() - function in net.corda.data.uniqueness.UniquenessCheckRequestAvro.Builder: Checks whether the 'numOutputStates' field has been set.
hasOffset() - function in net.corda.data.chunking.Chunk.Builder: Checks whether the 'offset' field has been set.
hasOffset() - function in net.corda.data.persistence.FindAll.Builder: Checks whether the 'offset' field has been set.
hasOffset() - function in net.corda.data.persistence.FindWithNamedQuery.Builder: Checks whether the 'offset' field has been set.
hasOnboardedMgm() - function in net.corda.data.membership.event.registration.MgmOnboarded.Builder: Checks whether the 'onboardedMgm' field has been set.
hasOnboardedMgmBuilder() - function in net.corda.data.membership.event.registration.MgmOnboarded.Builder: Checks whether the 'onboardedMgm' field has an active Builder instance Holding identity of the mgm who was onboarded.
hasOperationHistory() - function in net.corda.data.virtualnode.VirtualNodeOperationStatusResponse.Builder: Checks whether the 'operationHistory' field has been set.
hasOperationInProgress() - function in net.corda.data.virtualnode.VirtualNodeInfo.Builder: Checks whether the 'operationInProgress' field has been set.
hasOrderBy() - function in net.corda.data.crypto.wire.ops.rpc.queries.KeysRpcQuery.Builder: Checks whether the 'orderBy' field has been set.
hasOriginatorX500Name() - function in net.corda.data.uniqueness.UniquenessCheckRequestAvro.Builder: Checks whether the 'originatorX500Name' field has been set.
hasOther() - function in net.corda.data.crypto.wire.CryptoRequestContext.Builder: Checks whether the 'other' field has been set.
hasOther() - function in net.corda.data.crypto.wire.CryptoResponseContext.Builder: Checks whether the 'other' field has been set.
hasOtherBuilder() - function in net.corda.data.crypto.wire.CryptoRequestContext.Builder: Checks whether the 'other' field has an active Builder instance Any other list of context's key-values.
hasOtherBuilder() - function in net.corda.data.crypto.wire.CryptoResponseContext.Builder: Checks whether the 'other' field has an active Builder instance Any other list of context's key-values.
hasOtherPublicKey() - function in net.corda.data.crypto.wire.ops.rpc.commands.DeriveSharedSecretCommand.Builder: Checks whether the 'otherPublicKey' field has been set.
hasOwnerHash() - function in net.corda.data.ledger.utxo.token.selection.data.Token.Builder: Checks whether the 'ownerHash' field has been set.
hasOwnerHash() - function in net.corda.data.ledger.utxo.token.selection.data.TokenBalanceQuery.Builder: Checks whether the 'ownerHash' field has been set.
hasOwnerHash() - function in net.corda.data.ledger.utxo.token.selection.data.TokenClaimQuery.Builder: Checks whether the 'ownerHash' field has been set.
hasOwnerX500Name() - function in net.corda.data.membership.db.request.command.AddPreAuthToken.Builder: Checks whether the 'ownerX500Name' field has been set.
hasOwnerX500Name() - function in net.corda.data.membership.db.request.command.ConsumePreAuthToken.Builder: Checks whether the 'ownerX500Name' field has been set.
hasOwnerX500Name() - function in net.corda.data.membership.db.request.query.QueryPreAuthToken.Builder: Checks whether the 'ownerX500Name' field has been set.
hasOwnerX500Name() - function in net.corda.data.membership.preauth.PreAuthToken.Builder: Checks whether the 'ownerX500Name' field has been set.
hasPageCount() - function in net.corda.data.membership.p2p.MembershipPackage.Builder: Checks whether the 'pageCount' field has been set.
hasParameters() - function in net.corda.data.persistence.FindWithNamedQuery.Builder: Checks whether the 'parameters' field has been set.
hasParams() - function in net.corda.data.crypto.wire.CryptoSignatureSpec.Builder: Checks whether the 'params' field has been set.
hasParamsBuilder() - function in net.corda.data.crypto.wire.CryptoSignatureSpec.Builder: Checks whether the 'params' field has an active Builder instance An optional signature parameters.
hasParentGroupId() - function in net.corda.data.permissions.Group.Builder: Checks whether the 'parentGroupId' field has been set.
hasParentGroupId() - function in net.corda.data.permissions.User.Builder: Checks whether the 'parentGroupId' field has been set.
hasParentGroupId() - function in net.corda.data.permissions.management.user.CreateUserRequest.Builder: Checks whether the 'parentGroupId' field has been set.
hasPartitions() - function in net.corda.data.p2p.SessionPartitions.Builder: Checks whether the 'partitions' field has been set.
hasPartNumber() - function in net.corda.data.chunking.Chunk.Builder: Checks whether the 'partNumber' field has been set.
hasPartNumber() - function in net.corda.data.chunking.ChunkKey.Builder: Checks whether the 'partNumber' field has been set.
hasPasswordExpiry() - function in net.corda.data.permissions.User.Builder: Checks whether the 'passwordExpiry' field has been set.
hasPasswordExpiry() - function in net.corda.data.permissions.management.user.CreateUserRequest.Builder: Checks whether the 'passwordExpiry' field has been set.
hasPayload() - function in net.corda.data.AvroEnvelope.Builder: Checks whether the 'payload' field has been set.
hasPayload() - function in net.corda.data.flow.event.FlowEvent.Builder: Checks whether the 'payload' field has been set.
hasPayload() - function in net.corda.data.flow.event.SessionEvent.Builder: Checks whether the 'payload' field has been set.
hasPayload() - function in net.corda.data.flow.event.external.ExternalEvent.Builder: Checks whether the 'payload' field has been set.
hasPayload() - function in net.corda.data.flow.event.external.ExternalEventResponse.Builder: Checks whether the 'payload' field has been set.
hasPayload() - function in net.corda.data.flow.event.mapper.FlowMapperEvent.Builder: Checks whether the 'payload' field has been set.
hasPayload() - function in net.corda.data.flow.event.session.SessionData.Builder: Checks whether the 'payload' field has been set.
hasPayload() - function in net.corda.data.ledger.utxo.token.selection.event.TokenPoolCacheEvent.Builder: Checks whether the 'payload' field has been set.
hasPayload() - function in net.corda.data.ledger.utxo.token.selection.event.TokenSyncEvent.Builder: Checks whether the 'payload' field has been set.
hasPayload() - function in net.corda.data.membership.db.response.MembershipPersistenceResponse.Builder: Checks whether the 'payload' field has been set.
hasPayload() - function in net.corda.data.membership.p2p.UnauthenticatedRegistrationRequest.Builder: Checks whether the 'payload' field has been set.
hasPayload() - function in net.corda.data.membership.p2p.VerificationRequest.Builder: Checks whether the 'payload' field has been set.
hasPayload() - function in net.corda.data.membership.p2p.VerificationResponse.Builder: Checks whether the 'payload' field has been set.
hasPayload() - function in net.corda.data.messaging.RPCRequest.Builder: Checks whether the 'payload' field has been set.
hasPayload() - function in net.corda.data.messaging.RPCResponse.Builder: Checks whether the 'payload' field has been set.
hasPayload() - function in net.corda.data.p2p.LinkInMessage.Builder: Checks whether the 'payload' field has been set.
hasPayload() - function in net.corda.data.p2p.LinkOutMessage.Builder: Checks whether the 'payload' field has been set.
hasPayload() - function in net.corda.data.p2p.app.AuthenticatedMessage.Builder: Checks whether the 'payload' field has been set.
hasPayload() - function in net.corda.data.p2p.app.InboundUnauthenticatedMessage.Builder: Checks whether the 'payload' field has been set.
hasPayload() - function in net.corda.data.p2p.app.OutboundUnauthenticatedMessage.Builder: Checks whether the 'payload' field has been set.
hasPayload() - function in net.corda.data.p2p.crypto.AuthenticatedDataMessage.Builder: Checks whether the 'payload' field has been set.
hasPayload() - function in net.corda.data.p2p.gateway.GatewayMessage.Builder: Checks whether the 'payload' field has been set.
hasPayloadBuilder() - function in net.corda.data.membership.p2p.VerificationRequest.Builder: Checks whether the 'payload' field has an active Builder instance Request's payload.
hasPayloadBuilder() - function in net.corda.data.membership.p2p.VerificationResponse.Builder: Checks whether the 'payload' field has an active Builder instance Response's payload.
hasPendingPlatformError() - function in net.corda.data.flow.state.checkpoint.PipelineState.Builder: Checks whether the 'pendingPlatformError' field has been set.
hasPendingPlatformErrorBuilder() - function in net.corda.data.flow.state.checkpoint.PipelineState.Builder: Checks whether the 'pendingPlatformError' field has an active Builder instance Used for platform generated errors reported back to user code.
hasPeriodicSyncState() - function in net.corda.data.ledger.utxo.token.selection.state.TokenSyncState.Builder: Checks whether the 'periodicSyncState' field has been set.
hasPermissionId() - function in net.corda.data.permissions.PermissionAssociation.Builder: Checks whether the 'permissionId' field has been set.
hasPermissionId() - function in net.corda.data.permissions.management.role.AddPermissionToRoleRequest.Builder: Checks whether the 'permissionId' field has been set.
hasPermissionId() - function in net.corda.data.permissions.management.role.RemovePermissionFromRoleRequest.Builder: Checks whether the 'permissionId' field has been set.
hasPermissionIds() - function in net.corda.data.permissions.management.permission.BulkCreatePermissionsResponse.Builder: Checks whether the 'permissionIds' field has been set.
hasPermissions() - function in net.corda.data.permissions.Role.Builder: Checks whether the 'permissions' field has been set.
hasPermissions() - function in net.corda.data.permissions.summary.UserPermissionSummary.Builder: Checks whether the 'permissions' field has been set.
hasPermissionsToCreate() - function in net.corda.data.permissions.management.permission.BulkCreatePermissionsRequest.Builder: Checks whether the 'permissionsToCreate' field has been set.
hasPermissionString() - function in net.corda.data.permissions.Permission.Builder: Checks whether the 'permissionString' field has been set.
hasPermissionString() - function in net.corda.data.permissions.management.permission.CreatePermissionRequest.Builder: Checks whether the 'permissionString' field has been set.
hasPermissionString() - function in net.corda.data.permissions.summary.PermissionSummary.Builder: Checks whether the 'permissionString' field has been set.
hasPermissionType() - function in net.corda.data.permissions.Permission.Builder: Checks whether the 'permissionType' field has been set.
hasPermissionType() - function in net.corda.data.permissions.management.permission.CreatePermissionRequest.Builder: Checks whether the 'permissionType' field has been set.
hasPermissionType() - function in net.corda.data.permissions.summary.PermissionSummary.Builder: Checks whether the 'permissionType' field has been set.
hasPersistedRule() - function in net.corda.data.membership.db.response.command.PersistApprovalRuleResponse.Builder: Checks whether the 'persistedRule' field has been set.
hasPersistedRuleBuilder() - function in net.corda.data.membership.db.response.command.PersistApprovalRuleResponse.Builder: Checks whether the 'persistedRule' field has an active Builder instance Details of the newly persisted approval rule.
hasPersistentMemberInfo() - function in net.corda.data.membership.PersistentSignedMemberInfo.Builder: Checks whether the 'persistentMemberInfo' field has been set.
hasPersistentMemberInfoBuilder() - function in net.corda.data.membership.PersistentSignedMemberInfo.Builder: Checks whether the 'persistentMemberInfo' field has an active Builder instance Persistent member info for the member.
hasPipelineState() - function in net.corda.data.flow.state.checkpoint.Checkpoint.Builder: Checks whether the 'pipelineState' field has been set.
hasPipelineStateBuilder() - function in net.corda.data.flow.state.checkpoint.Checkpoint.Builder: Checks whether the 'pipelineState' field has an active Builder instance State required by the pipeline, e.g.
hasPoolKey() - function in net.corda.data.ledger.utxo.token.selection.data.TokenBalanceQuery.Builder: Checks whether the 'poolKey' field has been set.
hasPoolKey() - function in net.corda.data.ledger.utxo.token.selection.data.TokenBalanceQueryResult.Builder: Checks whether the 'poolKey' field has been set.
hasPoolKey() - function in net.corda.data.ledger.utxo.token.selection.data.TokenCachedSyncCheck.Builder: Checks whether the 'poolKey' field has been set.
hasPoolKey() - function in net.corda.data.ledger.utxo.token.selection.data.TokenClaimQuery.Builder: Checks whether the 'poolKey' field has been set.
hasPoolKey() - function in net.corda.data.ledger.utxo.token.selection.data.TokenClaimQueryResult.Builder: Checks whether the 'poolKey' field has been set.
hasPoolKey() - function in net.corda.data.ledger.utxo.token.selection.data.TokenClaimRelease.Builder: Checks whether the 'poolKey' field has been set.
hasPoolKey() - function in net.corda.data.ledger.utxo.token.selection.data.TokenForceClaimRelease.Builder: Checks whether the 'poolKey' field has been set.
hasPoolKey() - function in net.corda.data.ledger.utxo.token.selection.data.TokenLedgerChange.Builder: Checks whether the 'poolKey' field has been set.
hasPoolKey() - function in net.corda.data.ledger.utxo.token.selection.data.TokenPoolPeriodicSyncState.Builder: Checks whether the 'poolKey' field has been set.
hasPoolKey() - function in net.corda.data.ledger.utxo.token.selection.event.TokenPoolCacheEvent.Builder: Checks whether the 'poolKey' field has been set.
hasPoolKey() - function in net.corda.data.ledger.utxo.token.selection.state.TokenPoolCacheState.Builder: Checks whether the 'poolKey' field has been set.
hasPoolKeyBuilder() - function in net.corda.data.ledger.utxo.token.selection.data.TokenBalanceQuery.Builder: Checks whether the 'poolKey' field has an active Builder instance Token cache pool the query is for
hasPoolKeyBuilder() - function in net.corda.data.ledger.utxo.token.selection.data.TokenBalanceQueryResult.Builder: Checks whether the 'poolKey' field has an active Builder instance Key of the pool of the tokens that was used to calculate the balance
hasPoolKeyBuilder() - function in net.corda.data.ledger.utxo.token.selection.data.TokenCachedSyncCheck.Builder: Checks whether the 'poolKey' field has an active Builder instance Key for the pool the tokens refs belong to
hasPoolKeyBuilder() - function in net.corda.data.ledger.utxo.token.selection.data.TokenClaimQuery.Builder: Checks whether the 'poolKey' field has an active Builder instance Token cache pool the query is for
hasPoolKeyBuilder() - function in net.corda.data.ledger.utxo.token.selection.data.TokenClaimQueryResult.Builder: Checks whether the 'poolKey' field has an active Builder instance Key for the pool the tokens were claimed from
hasPoolKeyBuilder() - function in net.corda.data.ledger.utxo.token.selection.data.TokenClaimRelease.Builder: Checks whether the 'poolKey' field has an active Builder instance The key of the cache pool for the existing claim
hasPoolKeyBuilder() - function in net.corda.data.ledger.utxo.token.selection.data.TokenForceClaimRelease.Builder: Checks whether the 'poolKey' field has an active Builder instance The key of the cache pool for the existing claim
hasPoolKeyBuilder() - function in net.corda.data.ledger.utxo.token.selection.data.TokenLedgerChange.Builder: Checks whether the 'poolKey' field has an active Builder instance Token cache pool the change is for
hasPoolKeyBuilder() - function in net.corda.data.ledger.utxo.token.selection.data.TokenPoolPeriodicSyncState.Builder: Checks whether the 'poolKey' field has an active Builder instance Token cache pool the query is for
hasPoolKeyBuilder() - function in net.corda.data.ledger.utxo.token.selection.event.TokenPoolCacheEvent.Builder: Checks whether the 'poolKey' field has an active Builder instance The key of the cache pool the event is for
hasPoolKeyBuilder() - function in net.corda.data.ledger.utxo.token.selection.state.TokenPoolCacheState.Builder: Checks whether the 'poolKey' field has an active Builder instance The key of the cache pool the state is for
hasPreAuthToken() - function in net.corda.data.membership.db.response.command.RevokePreAuthTokenResponse.Builder: Checks whether the 'preAuthToken' field has been set.
hasPreAuthTokenBuilder() - function in net.corda.data.membership.db.response.command.RevokePreAuthTokenResponse.Builder: Checks whether the 'preAuthToken' field has an active Builder instance The revoked preAuthToken.
hasPreferredSessionKeyAndCert() - function in net.corda.data.p2p.HostedIdentityEntry.Builder: Checks whether the 'preferredSessionKeyAndCert' field has been set.
hasPreferredSessionKeyAndCertBuilder() - function in net.corda.data.p2p.HostedIdentityEntry.Builder: Checks whether the 'preferredSessionKeyAndCert' field has an active Builder instance The preferred session initiation key and certificate
hasPreviouslyCompletedCommands() - function in net.corda.data.membership.state.RegistrationState.Builder: Checks whether the 'previouslyCompletedCommands' field has been set.
hasProcessingTerminatedReason() - function in net.corda.data.flow.output.FlowStatus.Builder: Checks whether the 'processingTerminatedReason' field has been set.
hasProducedTokens() - function in net.corda.data.ledger.utxo.token.selection.data.TokenLedgerChange.Builder: Checks whether the 'producedTokens' field has been set.
hasProperties() - function in net.corda.data.chunking.Chunk.Builder: Checks whether the 'properties' field has been set.
hasProperties() - function in net.corda.data.membership.db.request.command.PersistGroupPolicy.Builder: Checks whether the 'properties' field has been set.
hasProperties() - function in net.corda.data.membership.db.response.query.GroupPolicyQueryResponse.Builder: Checks whether the 'properties' field has been set.
hasProperties() - function in net.corda.data.permissions.Group.Builder: Checks whether the 'properties' field has been set.
hasProperties() - function in net.corda.data.permissions.User.Builder: Checks whether the 'properties' field has been set.
hasPropertiesBuilder() - function in net.corda.data.chunking.Chunk.Builder: Checks whether the 'properties' field has an active Builder instance Optional list of chunk properties.
hasPropertiesBuilder() - function in net.corda.data.membership.db.request.command.PersistGroupPolicy.Builder: Checks whether the 'properties' field has an active Builder instance Group policy properties.
hasPropertiesBuilder() - function in net.corda.data.membership.db.response.query.GroupPolicyQueryResponse.Builder: Checks whether the 'properties' field has an active Builder instance Group policy properties.
hasProtocolVersion() - function in net.corda.data.p2p.crypto.CommonHeader.Builder: Checks whether the 'protocolVersion' field has been set.
hasPublicKey() - function in net.corda.data.crypto.wire.CryptoSignatureWithKey.Builder: Checks whether the 'publicKey' field has been set.
hasPublicKey() - function in net.corda.data.crypto.wire.CryptoSigningKey.Builder: Checks whether the 'publicKey' field has been set.
hasPublicKey() - function in net.corda.data.crypto.wire.ops.flow.commands.SignFlowCommand.Builder: Checks whether the 'publicKey' field has been set.
hasPublicKey() - function in net.corda.data.crypto.wire.ops.rpc.commands.DeriveSharedSecretCommand.Builder: Checks whether the 'publicKey' field has been set.
hasPublicKey() - function in net.corda.data.crypto.wire.ops.rpc.commands.SignRpcCommand.Builder: Checks whether the 'publicKey' field has been set.
hasQueryIdentities() - function in net.corda.data.membership.db.request.query.QueryMemberInfo.Builder: Checks whether the 'queryIdentities' field has been set.
hasQueryIdentities() - function in net.corda.data.membership.db.request.query.QueryMemberSignature.Builder: Checks whether the 'queryIdentities' field has been set.
hasQueryName() - function in net.corda.data.persistence.FindWithNamedQuery.Builder: Checks whether the 'queryName' field has been set.
hasQueryStatuses() - function in net.corda.data.membership.db.request.query.QueryMemberInfo.Builder: Checks whether the 'queryStatuses' field has been set.
hasRealKey() - function in net.corda.data.chunking.ChunkKey.Builder: Checks whether the 'realKey' field has been set.
hasReason() - function in net.corda.data.membership.command.registration.mgm.DeclineRegistration.Builder: Checks whether the 'reason' field has been set.
hasReason() - function in net.corda.data.membership.common.RegistrationRequestDetails.Builder: Checks whether the 'reason' field has been set.
hasReason() - function in net.corda.data.membership.db.request.command.ActivateMember.Builder: Checks whether the 'reason' field has been set.
hasReason() - function in net.corda.data.membership.db.request.command.SuspendMember.Builder: Checks whether the 'reason' field has been set.
hasReason() - function in net.corda.data.membership.db.request.command.UpdateRegistrationRequestStatus.Builder: Checks whether the 'reason' field has been set.
hasReason() - function in net.corda.data.membership.p2p.v2.SetOwnRegistrationStatus.Builder: Checks whether the 'reason' field has been set.
hasReason() - function in net.corda.data.p2p.gateway.certificates.Revoked.Builder: Checks whether the 'reason' field has been set.
hasReason() - function in net.corda.data.p2p.markers.LinkManagerDiscardedMarker.Builder: Checks whether the 'reason' field has been set.
hasReasonForUser() - function in net.corda.data.membership.command.registration.mgm.DeclineRegistration.Builder: Checks whether the 'reasonForUser' field has been set.
hasReceivedEventsState() - function in net.corda.data.flow.state.session.SessionState.Builder: Checks whether the 'receivedEventsState' field has been set.
hasReceivedEventsStateBuilder() - function in net.corda.data.flow.state.session.SessionState.Builder: Checks whether the 'receivedEventsState' field has an active Builder instance Record the highest contiguous sequence number received from the counterparty.
hasRecordsCompleted() - function in net.corda.data.ledger.utxo.token.selection.data.TokenFullSyncState.Builder: Checks whether the 'recordsCompleted' field has been set.
hasReferenceStates() - function in net.corda.data.uniqueness.UniquenessCheckRequestAvro.Builder: Checks whether the 'referenceStates' field has been set.
hasRegisteringHoldingIdentity() - function in net.corda.data.membership.db.request.command.PersistRegistrationRequest.Builder: Checks whether the 'registeringHoldingIdentity' field has been set.
hasRegisteringHoldingIdentityBuilder() - function in net.corda.data.membership.db.request.command.PersistRegistrationRequest.Builder: Checks whether the 'registeringHoldingIdentity' field has an active Builder instance Holding identity of the member owning the registration request.
hasRegisteringMember() - function in net.corda.data.membership.state.RegistrationState.Builder: Checks whether the 'registeringMember' field has been set.
hasRegisteringMemberBuilder() - function in net.corda.data.membership.state.RegistrationState.Builder: Checks whether the 'registeringMember' field has an active Builder instance Holding identity of the registering member as provided during P2P communication.
hasRegistrationContext() - function in net.corda.data.membership.common.RegistrationRequestDetails.Builder: Checks whether the 'registrationContext' field has been set.
hasRegistrationContext() - function in net.corda.data.membership.p2p.MembershipRegistrationRequest.Builder: Checks whether the 'registrationContext' field has been set.
hasRegistrationContextBuilder() - function in net.corda.data.membership.common.RegistrationRequestDetails.Builder: Checks whether the 'registrationContext' field has an active Builder instance Additional registration context which has been signed by the registering member and is not part of the MemberInfo (e.g.
hasRegistrationContextBuilder() - function in net.corda.data.membership.p2p.MembershipRegistrationRequest.Builder: Checks whether the 'registrationContext' field has an active Builder instance Additional registration context which has been signed by the registering member and is not part of the MemberInfo.
hasRegistrationId() - function in net.corda.data.membership.common.RegistrationRequestDetails.Builder: Checks whether the 'registrationId' field has been set.
hasRegistrationId() - function in net.corda.data.membership.db.request.command.UpdateMemberAndRegistrationRequestToApproved.Builder: Checks whether the 'registrationId' field has been set.
hasRegistrationId() - function in net.corda.data.membership.db.request.command.UpdateMemberAndRegistrationRequestToDeclined.Builder: Checks whether the 'registrationId' field has been set.
hasRegistrationId() - function in net.corda.data.membership.db.request.command.UpdateRegistrationRequestStatus.Builder: Checks whether the 'registrationId' field has been set.
hasRegistrationId() - function in net.corda.data.membership.p2p.MembershipRegistrationRequest.Builder: Checks whether the 'registrationId' field has been set.
hasRegistrationId() - function in net.corda.data.membership.p2p.SetOwnRegistrationStatus.Builder: Checks whether the 'registrationId' field has been set.
hasRegistrationId() - function in net.corda.data.membership.p2p.VerificationRequest.Builder: Checks whether the 'registrationId' field has been set.
hasRegistrationId() - function in net.corda.data.membership.p2p.VerificationResponse.Builder: Checks whether the 'registrationId' field has been set.
hasRegistrationId() - function in net.corda.data.membership.p2p.v2.SetOwnRegistrationStatus.Builder: Checks whether the 'registrationId' field has been set.
hasRegistrationId() - function in net.corda.data.membership.state.RegistrationState.Builder: Checks whether the 'registrationId' field has been set.
hasRegistrationLastModified() - function in net.corda.data.membership.common.RegistrationRequestDetails.Builder: Checks whether the 'registrationLastModified' field has been set.
hasRegistrationProtocolVersion() - function in net.corda.data.membership.common.RegistrationRequestDetails.Builder: Checks whether the 'registrationProtocolVersion' field has been set.
hasRegistrationRequest() - function in net.corda.data.membership.db.request.command.PersistRegistrationRequest.Builder: Checks whether the 'registrationRequest' field has been set.
hasRegistrationRequest() - function in net.corda.data.membership.db.response.query.RegistrationRequestQueryResponse.Builder: Checks whether the 'registrationRequest' field has been set.
hasRegistrationRequestBuilder() - function in net.corda.data.membership.db.request.command.PersistRegistrationRequest.Builder: Checks whether the 'registrationRequest' field has an active Builder instance The full registration request to persist as received over the P2P layer.
hasRegistrationRequestBuilder() - function in net.corda.data.membership.db.response.query.RegistrationRequestQueryResponse.Builder: Checks whether the 'registrationRequest' field has an active Builder instance The registration request queried for or null if the query executed correctly but there were no matches.
hasRegistrationRequestId() - function in net.corda.data.membership.db.request.query.QueryRegistrationRequest.Builder: Checks whether the 'registrationRequestId' field has been set.
hasRegistrationRequests() - function in net.corda.data.membership.db.response.query.RegistrationRequestsQueryResponse.Builder: Checks whether the 'registrationRequests' field has been set.
hasRegistrationSent() - function in net.corda.data.membership.common.RegistrationRequestDetails.Builder: Checks whether the 'registrationSent' field has been set.
hasRegistrationStatus() - function in net.corda.data.membership.common.RegistrationRequestDetails.Builder: Checks whether the 'registrationStatus' field has been set.
hasRegistrationStatus() - function in net.corda.data.membership.db.request.command.UpdateRegistrationRequestStatus.Builder: Checks whether the 'registrationStatus' field has been set.
hasRemark() - function in net.corda.data.membership.db.request.command.AddPreAuthToken.Builder: Checks whether the 'remark' field has been set.
hasRemark() - function in net.corda.data.membership.db.request.command.RevokePreAuthToken.Builder: Checks whether the 'remark' field has been set.
hasRemovalRemark() - function in net.corda.data.membership.preauth.PreAuthToken.Builder: Checks whether the 'removalRemark' field has been set.
hasReplyPartition() - function in net.corda.data.messaging.RPCRequest.Builder: Checks whether the 'replyPartition' field has been set.
hasReplyTopic() - function in net.corda.data.messaging.RPCRequest.Builder: Checks whether the 'replyTopic' field has been set.
hasRequest() - function in net.corda.data.certificates.rpc.request.CertificateRpcRequest.Builder: Checks whether the 'request' field has been set.
hasRequest() - function in net.corda.data.crypto.wire.hsm.registration.HSMRegistrationRequest.Builder: Checks whether the 'request' field has been set.
hasRequest() - function in net.corda.data.crypto.wire.ops.flow.FlowOpsRequest.Builder: Checks whether the 'request' field has been set.
hasRequest() - function in net.corda.data.crypto.wire.ops.rpc.RpcOpsRequest.Builder: Checks whether the 'request' field has been set.
hasRequest() - function in net.corda.data.ledger.persistence.LedgerPersistenceRequest.Builder: Checks whether the 'request' field has been set.
hasRequest() - function in net.corda.data.membership.actions.request.MembershipActionsRequest.Builder: Checks whether the 'request' field has been set.
hasRequest() - function in net.corda.data.membership.async.request.MembershipAsyncRequest.Builder: Checks whether the 'request' field has been set.
hasRequest() - function in net.corda.data.membership.async.request.MembershipAsyncRequestState.Builder: Checks whether the 'request' field has been set.
hasRequest() - function in net.corda.data.membership.db.request.MembershipPersistenceRequest.Builder: Checks whether the 'request' field has been set.
hasRequest() - function in net.corda.data.membership.db.request.async.MembershipPersistenceAsyncRequest.Builder: Checks whether the 'request' field has been set.
hasRequest() - function in net.corda.data.membership.db.request.async.MembershipPersistenceAsyncRequestState.Builder: Checks whether the 'request' field has been set.
hasRequest() - function in net.corda.data.membership.rpc.request.MembershipRpcRequest.Builder: Checks whether the 'request' field has been set.
hasRequest() - function in net.corda.data.permissions.management.PermissionManagementRequest.Builder: Checks whether the 'request' field has been set.
hasRequest() - function in net.corda.data.persistence.EntityRequest.Builder: Checks whether the 'request' field has been set.
hasRequest() - function in net.corda.data.virtualnode.VirtualNodeAsynchronousRequest.Builder: Checks whether the 'request' field has been set.
hasRequest() - function in net.corda.data.virtualnode.VirtualNodeManagementRequest.Builder: Checks whether the 'request' field has been set.
hasRequestBuilder() - function in net.corda.data.membership.async.request.MembershipAsyncRequest.Builder: Checks whether the 'request' field has an active Builder instance Request's payload, depends on the requested operation.
hasRequestBuilder() - function in net.corda.data.membership.async.request.MembershipAsyncRequestState.Builder: Checks whether the 'request' field has an active Builder instance The request.
hasRequestBuilder() - function in net.corda.data.membership.db.request.async.MembershipPersistenceAsyncRequest.Builder: Checks whether the 'request' field has an active Builder instance The persistence request
hasRequestBuilder() - function in net.corda.data.membership.db.request.async.MembershipPersistenceAsyncRequestState.Builder: Checks whether the 'request' field has an active Builder instance The request.
hasRequestContext() - function in net.corda.data.ledger.utxo.token.selection.data.TokenBalanceQuery.Builder: Checks whether the 'requestContext' field has been set.
hasRequestContext() - function in net.corda.data.ledger.utxo.token.selection.data.TokenClaimQuery.Builder: Checks whether the 'requestContext' field has been set.
hasRequestContext() - function in net.corda.data.ledger.utxo.token.selection.data.TokenClaimRelease.Builder: Checks whether the 'requestContext' field has been set.
hasRequestContext() - function in net.corda.data.membership.rpc.request.MembershipRpcRequest.Builder: Checks whether the 'requestContext' field has been set.
hasRequestContextBuilder() - function in net.corda.data.ledger.utxo.token.selection.data.TokenBalanceQuery.Builder: Checks whether the 'requestContext' field has an active Builder instance Flow request context data for the query
hasRequestContextBuilder() - function in net.corda.data.ledger.utxo.token.selection.data.TokenClaimQuery.Builder: Checks whether the 'requestContext' field has an active Builder instance Flow request context data for the query
hasRequestContextBuilder() - function in net.corda.data.ledger.utxo.token.selection.data.TokenClaimRelease.Builder: Checks whether the 'requestContext' field has an active Builder instance Flow request context data for the original claim query
hasRequestContextBuilder() - function in net.corda.data.membership.rpc.request.MembershipRpcRequest.Builder: Checks whether the 'requestContext' field has an active Builder instance Request context.
hasRequestData() - function in net.corda.data.virtualnode.VirtualNodeOperationStatus.Builder: Checks whether the 'requestData' field has been set.
hasRequestId() - function in net.corda.data.chunking.Chunk.Builder: Checks whether the 'requestId' field has been set.
hasRequestId() - function in net.corda.data.chunking.UploadStatusKey.Builder: Checks whether the 'requestId' field has been set.
hasRequestId() - function in net.corda.data.crypto.wire.CryptoRequestContext.Builder: Checks whether the 'requestId' field has been set.
hasRequestId() - function in net.corda.data.crypto.wire.CryptoResponseContext.Builder: Checks whether the 'requestId' field has been set.
hasRequestId() - function in net.corda.data.flow.FlowStartContext.Builder: Checks whether the 'requestId' field has been set.
hasRequestId() - function in net.corda.data.flow.event.external.ExternalEventContext.Builder: Checks whether the 'requestId' field has been set.
hasRequestId() - function in net.corda.data.flow.event.external.ExternalEventResponse.Builder: Checks whether the 'requestId' field has been set.
hasRequestId() - function in net.corda.data.flow.state.external.ExternalEventState.Builder: Checks whether the 'requestId' field has been set.
hasRequestId() - function in net.corda.data.flow.state.waiting.external.ExternalEventResponse.Builder: Checks whether the 'requestId' field has been set.
hasRequestId() - function in net.corda.data.membership.async.request.RegistrationAsyncRequest.Builder: Checks whether the 'requestId' field has been set.
hasRequestId() - function in net.corda.data.membership.db.request.MembershipRequestContext.Builder: Checks whether the 'requestId' field has been set.
hasRequestId() - function in net.corda.data.membership.db.response.MembershipResponseContext.Builder: Checks whether the 'requestId' field has been set.
hasRequestId() - function in net.corda.data.membership.rpc.request.MembershipRpcRequestContext.Builder: Checks whether the 'requestId' field has been set.
hasRequestId() - function in net.corda.data.membership.rpc.response.MembershipRpcResponseContext.Builder: Checks whether the 'requestId' field has been set.
hasRequestId() - function in net.corda.data.virtualnode.VirtualNodeAsynchronousRequest.Builder: Checks whether the 'requestId' field has been set.
hasRequestId() - function in net.corda.data.virtualnode.VirtualNodeOperationStatus.Builder: Checks whether the 'requestId' field has been set.
hasRequestId() - function in net.corda.data.virtualnode.VirtualNodeOperationStatusRequest.Builder: Checks whether the 'requestId' field has been set.
hasRequestId() - function in net.corda.data.virtualnode.VirtualNodeOperationStatusResponse.Builder: Checks whether the 'requestId' field has been set.
hasRequestingComponent() - function in net.corda.data.crypto.wire.CryptoRequestContext.Builder: Checks whether the 'requestingComponent' field has been set.
hasRequestingComponent() - function in net.corda.data.crypto.wire.CryptoResponseContext.Builder: Checks whether the 'requestingComponent' field has been set.
hasRequestSubjectX500Name() - function in net.corda.data.membership.db.request.query.QueryRegistrationRequests.Builder: Checks whether the 'requestSubjectX500Name' field has been set.
hasRequestTimestamp() - function in net.corda.data.crypto.wire.CryptoRequestContext.Builder: Checks whether the 'requestTimestamp' field has been set.
hasRequestTimestamp() - function in net.corda.data.crypto.wire.CryptoResponseContext.Builder: Checks whether the 'requestTimestamp' field has been set.
hasRequestTimestamp() - function in net.corda.data.membership.db.request.MembershipRequestContext.Builder: Checks whether the 'requestTimestamp' field has been set.
hasRequestTimestamp() - function in net.corda.data.membership.db.response.MembershipResponseContext.Builder: Checks whether the 'requestTimestamp' field has been set.
hasRequestTimestamp() - function in net.corda.data.membership.rpc.request.MembershipRpcRequestContext.Builder: Checks whether the 'requestTimestamp' field has been set.
hasRequestTimestamp() - function in net.corda.data.membership.rpc.response.MembershipRpcResponseContext.Builder: Checks whether the 'requestTimestamp' field has been set.
hasRequestTimestamp() - function in net.corda.data.virtualnode.VirtualNodeOperationStatus.Builder: Checks whether the 'requestTimestamp' field has been set.
hasRequestUserId() - function in net.corda.data.permissions.management.PermissionManagementRequest.Builder: Checks whether the 'requestUserId' field has been set.
hasRequireClose() - function in net.corda.data.flow.state.session.SessionState.Builder: Checks whether the 'requireClose' field has been set.
hasResponderCertificate() - function in net.corda.data.p2p.crypto.internal.ResponderEncryptedExtensions.Builder: Checks whether the 'responderCertificate' field has been set.
hasResponderEncryptedExtensions() - function in net.corda.data.p2p.crypto.internal.ResponderHandshakePayload.Builder: Checks whether the 'responderEncryptedExtensions' field has been set.
hasResponderEncryptedExtensionsBuilder() - function in net.corda.data.p2p.crypto.internal.ResponderHandshakePayload.Builder: Checks whether the 'responderEncryptedExtensions' field has an active Builder instance
hasResponderFinished() - function in net.corda.data.p2p.crypto.internal.ResponderHandshakePayload.Builder: Checks whether the 'responderFinished' field has been set.
hasResponderPartyVerify() - function in net.corda.data.p2p.crypto.internal.ResponderHandshakePayload.Builder: Checks whether the 'responderPartyVerify' field has been set.
hasResponderPublicKey() - function in net.corda.data.p2p.crypto.ResponderHelloMessage.Builder: Checks whether the 'responderPublicKey' field has been set.
hasResponderPublicKeyHash() - function in net.corda.data.p2p.crypto.internal.InitiatorEncryptedExtensions.Builder: Checks whether the 'responderPublicKeyHash' field has been set.
hasResponderPublicKeyHash() - function in net.corda.data.p2p.crypto.internal.ResponderHandshakePayload.Builder: Checks whether the 'responderPublicKeyHash' field has been set.
hasResponse() - function in net.corda.data.certificates.rpc.response.CertificateRpcResponse.Builder: Checks whether the 'response' field has been set.
hasResponse() - function in net.corda.data.crypto.wire.hsm.registration.HSMRegistrationResponse.Builder: Checks whether the 'response' field has been set.
hasResponse() - function in net.corda.data.crypto.wire.ops.flow.FlowOpsResponse.Builder: Checks whether the 'response' field has been set.
hasResponse() - function in net.corda.data.crypto.wire.ops.rpc.RpcOpsResponse.Builder: Checks whether the 'response' field has been set.
hasResponse() - function in net.corda.data.flow.state.external.ExternalEventState.Builder: Checks whether the 'response' field has been set.
hasResponse() - function in net.corda.data.membership.rpc.response.MembershipRpcResponse.Builder: Checks whether the 'response' field has been set.
hasResponse() - function in net.corda.data.permissions.management.PermissionManagementResponse.Builder: Checks whether the 'response' field has been set.
hasResponseBuilder() - function in net.corda.data.flow.state.external.ExternalEventState.Builder: Checks whether the 'response' field has an active Builder instance The response received from the external worker.
hasResponseContext() - function in net.corda.data.membership.rpc.response.MembershipRpcResponse.Builder: Checks whether the 'responseContext' field has been set.
hasResponseContextBuilder() - function in net.corda.data.membership.rpc.response.MembershipRpcResponse.Builder: Checks whether the 'responseContext' field has an active Builder instance Response context.
hasResponseStatus() - function in net.corda.data.messaging.RPCResponse.Builder: Checks whether the 'responseStatus' field has been set.
hasResponseTimestamp() - function in net.corda.data.crypto.wire.CryptoResponseContext.Builder: Checks whether the 'responseTimestamp' field has been set.
hasResponseTimestamp() - function in net.corda.data.membership.db.response.MembershipResponseContext.Builder: Checks whether the 'responseTimestamp' field has been set.
hasResponseTimestamp() - function in net.corda.data.membership.rpc.response.MembershipRpcResponseContext.Builder: Checks whether the 'responseTimestamp' field has been set.
hasResponseType() - function in net.corda.data.virtualnode.VirtualNodeManagementResponse.Builder: Checks whether the 'responseType' field has been set.
hasResult() - function in net.corda.data.flow.output.FlowStatus.Builder: Checks whether the 'result' field has been set.
hasResult() - function in net.corda.data.uniqueness.UniquenessCheckResponseAvro.Builder: Checks whether the 'result' field has been set.
hasResults() - function in net.corda.data.ledger.persistence.FindSignedGroupParametersResponse.Builder: Checks whether the 'results' field has been set.
hasResults() - function in net.corda.data.persistence.EntityResponse.Builder: Checks whether the 'results' field has been set.
hasResultType() - function in net.corda.data.ledger.utxo.token.selection.data.TokenClaimQueryResult.Builder: Checks whether the 'resultType' field has been set.
hasResumePoint() - function in net.corda.data.persistence.EntityResponse.Builder: Checks whether the 'resumePoint' field has been set.
hasResumePoint() - function in net.corda.data.persistence.FindWithNamedQuery.Builder: Checks whether the 'resumePoint' field has been set.
hasRetries() - function in net.corda.data.flow.state.external.ExternalEventState.Builder: Checks whether the 'retries' field has been set.
hasRetryCount() - function in net.corda.data.flow.state.checkpoint.RetryState.Builder: Checks whether the 'retryCount' field has been set.
hasRetryState() - function in net.corda.data.flow.state.checkpoint.PipelineState.Builder: Checks whether the 'retryState' field has been set.
hasRetryStateBuilder() - function in net.corda.data.flow.state.checkpoint.PipelineState.Builder: Checks whether the 'retryState' field has an active Builder instance Optional retry information for a failed flow event.
hasRoleAssociations() - function in net.corda.data.permissions.Group.Builder: Checks whether the 'roleAssociations' field has been set.
hasRoleAssociations() - function in net.corda.data.permissions.User.Builder: Checks whether the 'roleAssociations' field has been set.
hasRoleId() - function in net.corda.data.permissions.RoleAssociation.Builder: Checks whether the 'roleId' field has been set.
hasRoleId() - function in net.corda.data.permissions.management.role.AddPermissionToRoleRequest.Builder: Checks whether the 'roleId' field has been set.
hasRoleId() - function in net.corda.data.permissions.management.role.RemovePermissionFromRoleRequest.Builder: Checks whether the 'roleId' field has been set.
hasRoleId() - function in net.corda.data.permissions.management.user.AddRoleToUserRequest.Builder: Checks whether the 'roleId' field has been set.
hasRoleId() - function in net.corda.data.permissions.management.user.RemoveRoleFromUserRequest.Builder: Checks whether the 'roleId' field has been set.
hasRoleIds() - function in net.corda.data.permissions.management.permission.BulkCreatePermissionsRequest.Builder: Checks whether the 'roleIds' field has been set.
hasRoleIds() - function in net.corda.data.permissions.management.permission.BulkCreatePermissionsResponse.Builder: Checks whether the 'roleIds' field has been set.
hasRoleName() - function in net.corda.data.permissions.management.role.CreateRoleRequest.Builder: Checks whether the 'roleName' field has been set.
hasRule() - function in net.corda.data.membership.db.request.command.PersistApprovalRule.Builder: Checks whether the 'rule' field has been set.
hasRuleId() - function in net.corda.data.membership.common.ApprovalRuleDetails.Builder: Checks whether the 'ruleId' field has been set.
hasRuleId() - function in net.corda.data.membership.db.request.command.DeleteApprovalRule.Builder: Checks whether the 'ruleId' field has been set.
hasRuleId() - function in net.corda.data.membership.db.request.command.PersistApprovalRule.Builder: Checks whether the 'ruleId' field has been set.
hasRuleLabel() - function in net.corda.data.membership.common.ApprovalRuleDetails.Builder: Checks whether the 'ruleLabel' field has been set.
hasRuleRegex() - function in net.corda.data.membership.common.ApprovalRuleDetails.Builder: Checks whether the 'ruleRegex' field has been set.
hasRules() - function in net.corda.data.membership.db.response.query.ApprovalRulesQueryResponse.Builder: Checks whether the 'rules' field has been set.
hasRuleType() - function in net.corda.data.membership.db.request.command.DeleteApprovalRule.Builder: Checks whether the 'ruleType' field has been set.
hasRuleType() - function in net.corda.data.membership.db.request.command.PersistApprovalRule.Builder: Checks whether the 'ruleType' field has been set.
hasRuleType() - function in net.corda.data.membership.db.request.query.QueryApprovalRules.Builder: Checks whether the 'ruleType' field has been set.
hasSalt() - function in net.corda.data.membership.p2p.UnauthenticatedRegistrationRequestHeader.Builder: Checks whether the 'salt' field has been set.
hasSaltValue() - function in net.corda.data.permissions.User.Builder: Checks whether the 'saltValue' field has been set.
hasSaltValue() - function in net.corda.data.permissions.management.user.CreateUserRequest.Builder: Checks whether the 'saltValue' field has been set.
hasScale() - function in net.corda.data.ledger.utxo.token.selection.data.TokenAmount.Builder: Checks whether the 'scale' field has been set.
hasSchemaVersion() - function in net.corda.data.config.Configuration.Builder: Checks whether the 'schemaVersion' field has been set.
hasSchemaVersion() - function in net.corda.data.config.ConfigurationManagementRequest.Builder: Checks whether the 'schemaVersion' field has been set.
hasSchemaVersion() - function in net.corda.data.config.ConfigurationManagementResponse.Builder: Checks whether the 'schemaVersion' field has been set.
hasSchemaVersionBuilder() - function in net.corda.data.config.Configuration.Builder: Checks whether the 'schemaVersion' field has an active Builder instance Schema version for this configuration.
hasSchemaVersionBuilder() - function in net.corda.data.config.ConfigurationManagementRequest.Builder: Checks whether the 'schemaVersion' field has an active Builder instance Schema version of the updated configuration.
hasSchemaVersionBuilder() - function in net.corda.data.config.ConfigurationManagementResponse.Builder: Checks whether the 'schemaVersion' field has an active Builder instance Schema version of the current configuration.
hasSchemeCodeName() - function in net.corda.data.crypto.wire.CryptoSigningKey.Builder: Checks whether the 'schemeCodeName' field has been set.
hasSchemeCodeName() - function in net.corda.data.crypto.wire.ops.flow.commands.GenerateFreshKeyFlowCommand.Builder: Checks whether the 'schemeCodeName' field has been set.
hasSchemeCodeName() - function in net.corda.data.crypto.wire.ops.rpc.commands.GenerateFreshKeyRpcCommand.Builder: Checks whether the 'schemeCodeName' field has been set.
hasSchemeCodeName() - function in net.corda.data.crypto.wire.ops.rpc.commands.GenerateKeyPairCommand.Builder: Checks whether the 'schemeCodeName' field has been set.
hasSecret() - function in net.corda.data.crypto.wire.CryptoDerivedSharedSecret.Builder: Checks whether the 'secret' field has been set.
hasSection() - function in net.corda.data.config.ConfigurationManagementRequest.Builder: Checks whether the 'section' field has been set.
hasSection() - function in net.corda.data.config.ConfigurationManagementResponse.Builder: Checks whether the 'section' field has been set.
hasSegment() - function in net.corda.data.packaging.CpiSegmentResponse.Builder: Checks whether the 'segment' field has been set.
hasSelectedMode() - function in net.corda.data.p2p.crypto.internal.ResponderEncryptedExtensions.Builder: Checks whether the 'selectedMode' field has been set.
hasSender() - function in net.corda.data.messaging.RPCRequest.Builder: Checks whether the 'sender' field has been set.
hasSender() - function in net.corda.data.messaging.RPCResponse.Builder: Checks whether the 'sender' field has been set.
hasSendEventsState() - function in net.corda.data.flow.state.session.SessionState.Builder: Checks whether the 'sendEventsState' field has been set.
hasSendEventsStateBuilder() - function in net.corda.data.flow.state.session.SessionState.Builder: Checks whether the 'sendEventsState' field has an active Builder instance Record the sequence number of the last event sent to the counterparty.
hasSendTime() - function in net.corda.data.messaging.RPCRequest.Builder: Checks whether the 'sendTime' field has been set.
hasSendTime() - function in net.corda.data.messaging.RPCResponse.Builder: Checks whether the 'sendTime' field has been set.
hasSendTimestamp() - function in net.corda.data.flow.state.external.ExternalEventState.Builder: Checks whether the 'sendTimestamp' field has been set.
hasSequenceNo() - function in net.corda.data.p2p.crypto.CommonHeader.Builder: Checks whether the 'sequenceNo' field has been set.
hasSequenceNum() - function in net.corda.data.flow.event.SessionEvent.Builder: Checks whether the 'sequenceNum' field has been set.
hasSequenceNumber() - function in net.corda.data.chunking.UploadStatusKey.Builder: Checks whether the 'sequenceNumber' field has been set.
hasSerial() - function in net.corda.data.membership.common.RegistrationRequestDetails.Builder: Checks whether the 'serial' field has been set.
hasSerial() - function in net.corda.data.membership.p2p.MembershipRegistrationRequest.Builder: Checks whether the 'serial' field has been set.
hasSerializedMgmContext() - function in net.corda.data.membership.PersistentMemberInfo.Builder: Checks whether the 'serializedMgmContext' field has been set.
hasSerialNumber() - function in net.corda.data.membership.db.request.command.ActivateMember.Builder: Checks whether the 'serialNumber' field has been set.
hasSerialNumber() - function in net.corda.data.membership.db.request.command.SuspendMember.Builder: Checks whether the 'serialNumber' field has been set.
hasSessionCertificates() - function in net.corda.data.p2p.HostedIdentitySessionKeyAndCert.Builder: Checks whether the 'sessionCertificates' field has been set.
hasSessionId() - function in net.corda.data.flow.event.SessionEvent.Builder: Checks whether the 'sessionId' field has been set.
hasSessionId() - function in net.corda.data.flow.state.checkpoint.FlowStackItemSession.Builder: Checks whether the 'sessionId' field has been set.
hasSessionId() - function in net.corda.data.flow.state.session.SessionState.Builder: Checks whether the 'sessionId' field has been set.
hasSessionId() - function in net.corda.data.flow.state.waiting.CounterPartyFlowInfo.Builder: Checks whether the 'sessionId' field has been set.
hasSessionId() - function in net.corda.data.p2p.crypto.CommonHeader.Builder: Checks whether the 'sessionId' field has been set.
hasSessionIds() - function in net.corda.data.flow.state.waiting.SessionConfirmation.Builder: Checks whether the 'sessionIds' field has been set.
hasSessionIds() - function in net.corda.data.flow.state.waiting.SessionData.Builder: Checks whether the 'sessionIds' field has been set.
hasSessionInit() - function in net.corda.data.flow.event.session.SessionCounterpartyInfoRequest.Builder: Checks whether the 'sessionInit' field has been set.
hasSessionInit() - function in net.corda.data.flow.event.session.SessionData.Builder: Checks whether the 'sessionInit' field has been set.
hasSessionInitBuilder() - function in net.corda.data.flow.event.session.SessionCounterpartyInfoRequest.Builder: Checks whether the 'sessionInit' field has an active Builder instance Contains information that can be used to start an initiated flow.
hasSessionInitBuilder() - function in net.corda.data.flow.event.session.SessionData.Builder: Checks whether the 'sessionInit' field has an active Builder instance Contains information that can be used to start an initiated flow, piggybacked on initial data messages.
hasSessionProperties() - function in net.corda.data.flow.state.session.SessionState.Builder: Checks whether the 'sessionProperties' field has been set.
hasSessionPropertiesBuilder() - function in net.corda.data.flow.state.session.SessionState.Builder: Checks whether the 'sessionProperties' field has an active Builder instance A map of context properties related to this flow session.
hasSessionPublicKey() - function in net.corda.data.p2p.HostedIdentitySessionKeyAndCert.Builder: Checks whether the 'sessionPublicKey' field has been set.
hasSessions() - function in net.corda.data.flow.state.checkpoint.FlowStackItem.Builder: Checks whether the 'sessions' field has been set.
hasSessions() - function in net.corda.data.flow.state.checkpoint.FlowState.Builder: Checks whether the 'sessions' field has been set.
hasSessionStartTime() - function in net.corda.data.flow.state.session.SessionState.Builder: Checks whether the 'sessionStartTime' field has been set.
hasSetStatusRequest() - function in net.corda.data.membership.command.registration.member.PersistMemberRegistrationState.Builder: Checks whether the 'setStatusRequest' field has been set.
hasShortHolderId() - function in net.corda.data.ledger.utxo.token.selection.key.TokenPoolCacheKey.Builder: Checks whether the 'shortHolderId' field has been set.
hasShortName() - function in net.corda.data.packaging.CorDappManifest.Builder: Checks whether the 'shortName' field has been set.
hasSignature() - function in net.corda.data.membership.SignedData.Builder: Checks whether the 'signature' field has been set.
hasSignature() - function in net.corda.data.membership.db.response.query.MemberSignature.Builder: Checks whether the 'signature' field has been set.
hasSignatureBuilder() - function in net.corda.data.membership.SignedData.Builder: Checks whether the 'signature' field has an active Builder instance Signature over the data byte array.
hasSignatureBuilder() - function in net.corda.data.membership.db.response.query.MemberSignature.Builder: Checks whether the 'signature' field has an active Builder instance The member signature.
hasSignatureName() - function in net.corda.data.crypto.wire.CryptoSignatureSpec.Builder: Checks whether the 'signatureName' field has been set.
hasSignatureSpec() - function in net.corda.data.crypto.wire.ops.flow.commands.SignFlowCommand.Builder: Checks whether the 'signatureSpec' field has been set.
hasSignatureSpec() - function in net.corda.data.crypto.wire.ops.rpc.commands.SignRpcCommand.Builder: Checks whether the 'signatureSpec' field has been set.
hasSignatureSpec() - function in net.corda.data.membership.SignedData.Builder: Checks whether the 'signatureSpec' field has been set.
hasSignatureSpec() - function in net.corda.data.membership.db.response.query.MemberSignature.Builder: Checks whether the 'signatureSpec' field has been set.
hasSignatureSpecBuilder() - function in net.corda.data.crypto.wire.ops.flow.commands.SignFlowCommand.Builder: Checks whether the 'signatureSpec' field has an active Builder instance Overrides the default signature scheme, otherwise the default scheme is used
hasSignatureSpecBuilder() - function in net.corda.data.crypto.wire.ops.rpc.commands.SignRpcCommand.Builder: Checks whether the 'signatureSpec' field has an active Builder instance Overrides the default signature scheme, otherwise the default scheme is used
hasSignatureSpecBuilder() - function in net.corda.data.membership.SignedData.Builder: Checks whether the 'signatureSpec' field has an active Builder instance Signature spec of the signature.
hasSignatureSpecBuilder() - function in net.corda.data.membership.db.response.query.MemberSignature.Builder: Checks whether the 'signatureSpec' field has an active Builder instance Signature spec of member signature.
hasSignedGroupParameters() - function in net.corda.data.ledger.persistence.PersistSignedGroupParametersIfDoNotExist.Builder: Checks whether the 'signedGroupParameters' field has been set.
hasSignedGroupParametersBuilder() - function in net.corda.data.ledger.persistence.PersistSignedGroupParametersIfDoNotExist.Builder: Checks whether the 'signedGroupParameters' field has an active Builder instance Signed group parameters
hasSignedMemberContext() - function in net.corda.data.membership.PersistentMemberInfo.Builder: Checks whether the 'signedMemberContext' field has been set.
hasSignedMemberContextBuilder() - function in net.corda.data.membership.PersistentMemberInfo.Builder: Checks whether the 'signedMemberContext' field has an active Builder instance The serialized and signed byte data used as member context.
hasSignedMembers() - function in net.corda.data.membership.db.request.command.PersistMemberInfo.Builder: Checks whether the 'signedMembers' field has been set.
hasSignerSummaryHash() - function in net.corda.data.packaging.CpiIdentifier.Builder: Checks whether the 'signerSummaryHash' field has been set.
hasSignerSummaryHash() - function in net.corda.data.packaging.CpkIdentifier.Builder: Checks whether the 'signerSummaryHash' field has been set.
hasSignerSummaryHash() - function in net.corda.ledger.utxo.verification.CordaPackageSummary.Builder: Checks whether the 'signerSummaryHash' field has been set.
hasSignerSummaryHashBuilder() - function in net.corda.data.packaging.CpiIdentifier.Builder: Checks whether the 'signerSummaryHash' field has an active Builder instance
hasSignerSummaryHashBuilder() - function in net.corda.data.packaging.CpkIdentifier.Builder: Checks whether the 'signerSummaryHash' field has an active Builder instance
hasSkip() - function in net.corda.data.crypto.wire.ops.rpc.queries.KeysRpcQuery.Builder: Checks whether the 'skip' field has been set.
hasSource() - function in net.corda.data.config.Configuration.Builder: Checks whether the 'source' field has been set.
hasSource() - function in net.corda.data.membership.command.registration.member.ProcessMemberVerificationRequest.Builder: Checks whether the 'source' field has been set.
hasSource() - function in net.corda.data.p2p.app.AuthenticatedMessageHeader.Builder: Checks whether the 'source' field has been set.
hasSource() - function in net.corda.data.p2p.app.OutboundUnauthenticatedMessageHeader.Builder: Checks whether the 'source' field has been set.
hasSource() - function in net.corda.data.p2p.crypto.InitiatorHelloMessage.Builder: Checks whether the 'source' field has been set.
hasSourceBuilder() - function in net.corda.data.membership.command.registration.member.ProcessMemberVerificationRequest.Builder: Checks whether the 'source' field has an active Builder instance Holding identity of the MGM.
hasSourceBuilder() - function in net.corda.data.p2p.app.AuthenticatedMessageHeader.Builder: Checks whether the 'source' field has an active Builder instance The source identity of this message.
hasSourceBuilder() - function in net.corda.data.p2p.app.OutboundUnauthenticatedMessageHeader.Builder: Checks whether the 'source' field has an active Builder instance The source identity of this message.
hasSourceBuilder() - function in net.corda.data.p2p.crypto.InitiatorHelloMessage.Builder: Checks whether the 'source' field has an active Builder instance
hasSourceIdentity() - function in net.corda.data.p2p.GatewayTruststore.Builder: Checks whether the 'sourceIdentity' field has been set.
hasSourceIdentity() - function in net.corda.data.p2p.LinkOutHeader.Builder: Checks whether the 'sourceIdentity' field has been set.
hasSourceIdentityBuilder() - function in net.corda.data.p2p.GatewayTruststore.Builder: Checks whether the 'sourceIdentity' field has an active Builder instance The source identity (x500 name + group ID)
hasSourceIdentityBuilder() - function in net.corda.data.p2p.LinkOutHeader.Builder: Checks whether the 'sourceIdentity' field has an active Builder instance The source identity (x500 name + group ID)
hasSsoAuth() - function in net.corda.data.permissions.User.Builder: Checks whether the 'ssoAuth' field has been set.
hasStart() - function in net.corda.data.packaging.CpiSegmentRequest.Builder: Checks whether the 'start' field has been set.
hasStartArgs() - function in net.corda.data.flow.FlowStartContext.Builder: Checks whether the 'startArgs' field has been set.
hasStartContext() - function in net.corda.data.flow.event.StartFlow.Builder: Checks whether the 'startContext' field has been set.
hasStartContextBuilder() - function in net.corda.data.flow.event.StartFlow.Builder: Checks whether the 'startContext' field has an active Builder instance The request ID assigned by the client that created the flow.
hasStartedTimestamp() - function in net.corda.data.ledger.utxo.token.selection.data.TokenFullSyncState.Builder: Checks whether the 'startedTimestamp' field has been set.
hasState() - function in net.corda.data.deadletter.StateAndEventDeadLetterRecord.Builder: Checks whether the 'state' field has been set.
hasState() - function in net.corda.data.membership.async.request.MembershipAsyncRequest.Builder: Checks whether the 'state' field has been set.
hasState() - function in net.corda.data.virtualnode.VirtualNodeOperationStatus.Builder: Checks whether the 'state' field has been set.
hasStateBuilder() - function in net.corda.data.membership.async.request.MembershipAsyncRequest.Builder: Checks whether the 'state' field has an active Builder instance Request latest state.
hasStateClassName() - function in net.corda.data.ledger.persistence.FindUnconsumedStatesByType.Builder: Checks whether the 'stateClassName' field has been set.
hasStateRef() - function in net.corda.data.ledger.utxo.token.selection.data.Token.Builder: Checks whether the 'stateRef' field has been set.
hasStateRefs() - function in net.corda.data.ledger.persistence.ResolveStateRefs.Builder: Checks whether the 'stateRefs' field has been set.
hasStatus() - function in net.corda.data.flow.state.external.ExternalEventState.Builder: Checks whether the 'status' field has been set.
hasStatus() - function in net.corda.data.flow.state.mapper.FlowMapperState.Builder: Checks whether the 'status' field has been set.
hasStatus() - function in net.corda.data.flow.state.session.SessionState.Builder: Checks whether the 'status' field has been set.
hasStatus() - function in net.corda.data.ledger.persistence.PersistTransaction.Builder: Checks whether the 'status' field has been set.
hasStatus() - function in net.corda.data.ledger.persistence.PersistTransactionIfDoesNotExist.Builder: Checks whether the 'status' field has been set.
hasStatus() - function in net.corda.data.membership.db.request.command.PersistRegistrationRequest.Builder: Checks whether the 'status' field has been set.
hasStatus() - function in net.corda.data.membership.preauth.PreAuthToken.Builder: Checks whether the 'status' field has been set.
hasStatus() - function in net.corda.data.p2p.gateway.certificates.RevocationCheckResponse.Builder: Checks whether the 'status' field has been set.
hasStatusBuilder() - function in net.corda.data.flow.state.external.ExternalEventState.Builder: Checks whether the 'status' field has an active Builder instance Status of the state.
hasStatuses() - function in net.corda.data.membership.db.request.query.QueryPreAuthToken.Builder: Checks whether the 'statuses' field has been set.
hasStatuses() - function in net.corda.data.membership.db.request.query.QueryRegistrationRequests.Builder: Checks whether the 'statuses' field has been set.
hasStatusFilter() - function in net.corda.data.p2p.app.AuthenticatedMessageHeader.Builder: Checks whether the 'statusFilter' field has been set.
hasStatusKey() - function in net.corda.data.flow.FlowStartContext.Builder: Checks whether the 'statusKey' field has been set.
hasStatusKeyBuilder() - function in net.corda.data.flow.FlowStartContext.Builder: Checks whether the 'statusKey' field has an active Builder instance The unique ID for tracking the flow status
hasStopRetriesAfter() - function in net.corda.data.membership.async.request.SentToMgmWaitingForNetwork.Builder: Checks whether the 'stopRetriesAfter' field has been set.
hasSubject() - function in net.corda.data.membership.db.request.command.MutualTlsAddToAllowedCertificates.Builder: Checks whether the 'subject' field has been set.
hasSubject() - function in net.corda.data.membership.db.request.command.MutualTlsRemoveFromAllowedCertificates.Builder: Checks whether the 'subject' field has been set.
hasSubject() - function in net.corda.data.p2p.mtls.MemberAllowedCertificateSubject.Builder: Checks whether the 'subject' field has been set.
hasSubject() - function in net.corda.data.p2p.mtls.MgmAllowedCertificateSubject.Builder: Checks whether the 'subject' field has been set.
hasSubject() - function in net.corda.data.p2p.mtls.gateway.ClientCertificateSubjects.Builder: Checks whether the 'subject' field has been set.
hasSubjects() - function in net.corda.data.membership.db.response.query.MutualTlsListAllowedCertificatesResponse.Builder: Checks whether the 'subjects' field has been set.
hasSubsystem() - function in net.corda.data.p2p.app.AuthenticatedMessageHeader.Builder: Checks whether the 'subsystem' field has been set.
hasSubsystem() - function in net.corda.data.p2p.app.InboundUnauthenticatedMessageHeader.Builder: Checks whether the 'subsystem' field has been set.
hasSubsystem() - function in net.corda.data.p2p.app.OutboundUnauthenticatedMessageHeader.Builder: Checks whether the 'subsystem' field has been set.
hasSuccess() - function in net.corda.data.config.ConfigurationManagementResponse.Builder: Checks whether the 'success' field has been set.
hasSupportedModes() - function in net.corda.data.p2p.crypto.internal.InitiatorEncryptedExtensions.Builder: Checks whether the 'supportedModes' field has been set.
hasSuspendCount() - function in net.corda.data.flow.state.checkpoint.FlowState.Builder: Checks whether the 'suspendCount' field has been set.
hasSuspendedMember() - function in net.corda.data.membership.db.request.command.SuspendMember.Builder: Checks whether the 'suspendedMember' field has been set.
hasSuspendedOn() - function in net.corda.data.flow.state.checkpoint.FlowState.Builder: Checks whether the 'suspendedOn' field has been set.
hasSymbol() - function in net.corda.data.ledger.utxo.token.selection.key.TokenPoolCacheKey.Builder: Checks whether the 'symbol' field has been set.
hasSynchronisationMetaData() - function in net.corda.data.membership.command.synchronisation.member.ProcessMembershipUpdates.Builder: Checks whether the 'synchronisationMetaData' field has been set.
hasSynchronisationMetaData() - function in net.corda.data.membership.command.synchronisation.mgm.ProcessSyncRequest.Builder: Checks whether the 'synchronisationMetaData' field has been set.
hasSynchronisationMetaDataBuilder() - function in net.corda.data.membership.command.synchronisation.member.ProcessMembershipUpdates.Builder: Checks whether the 'synchronisationMetaData' field has an active Builder instance Data used for processing synchronisation commands.
hasSynchronisationMetaDataBuilder() - function in net.corda.data.membership.command.synchronisation.mgm.ProcessSyncRequest.Builder: Checks whether the 'synchronisationMetaData' field has an active Builder instance Data used for processing synchronisation commands.
hasSyncId() - function in net.corda.data.membership.p2p.DistributionMetaData.Builder: Checks whether the 'syncId' field has been set.
hasSyncRequest() - function in net.corda.data.membership.command.synchronisation.mgm.ProcessSyncRequest.Builder: Checks whether the 'syncRequest' field has been set.
hasSyncRequestBuilder() - function in net.corda.data.membership.command.synchronisation.mgm.ProcessSyncRequest.Builder: Checks whether the 'syncRequest' field has an active Builder instance Sync request sent by the member.
hasSyncRequested() - function in net.corda.data.membership.p2p.DistributionMetaData.Builder: Checks whether the 'syncRequested' field has been set.
hasTag() - function in net.corda.data.ledger.utxo.token.selection.data.Token.Builder: Checks whether the 'tag' field has been set.
hasTagRegex() - function in net.corda.data.ledger.utxo.token.selection.data.TokenBalanceQuery.Builder: Checks whether the 'tagRegex' field has been set.
hasTagRegex() - function in net.corda.data.ledger.utxo.token.selection.data.TokenClaimQuery.Builder: Checks whether the 'tagRegex' field has been set.
hasTake() - function in net.corda.data.crypto.wire.ops.rpc.queries.KeysRpcQuery.Builder: Checks whether the 'take' field has been set.
hasTargetAmount() - function in net.corda.data.ledger.utxo.token.selection.data.TokenClaimQuery.Builder: Checks whether the 'targetAmount' field has been set.
hasTargetAmountBuilder() - function in net.corda.data.ledger.utxo.token.selection.data.TokenClaimQuery.Builder: Checks whether the 'targetAmount' field has an active Builder instance The target amount to be claimed.
hasTargetPlatformVersion() - function in net.corda.data.packaging.CorDappManifest.Builder: Checks whether the 'targetPlatformVersion' field has been set.
hasTenantId() - function in net.corda.data.crypto.wire.CryptoRequestContext.Builder: Checks whether the 'tenantId' field has been set.
hasTenantId() - function in net.corda.data.crypto.wire.CryptoResponseContext.Builder: Checks whether the 'tenantId' field has been set.
hasTenantId() - function in net.corda.data.crypto.wire.CryptoSigningKey.Builder: Checks whether the 'tenantId' field has been set.
hasTenantId() - function in net.corda.data.crypto.wire.hsm.HSMAssociationInfo.Builder: Checks whether the 'tenantId' field has been set.
hasTenantId() - function in net.corda.data.p2p.GatewayTlsCertificates.Builder: Checks whether the 'tenantId' field has been set.
hasTimeoutDateTime() - function in net.corda.data.flow.FlowTimeout.Builder: Checks whether the 'timeoutDateTime' field has been set.
hasTimestamp() - function in net.corda.data.deadletter.StateAndEventDeadLetterRecord.Builder: Checks whether the 'timestamp' field has been set.
hasTimestamp() - function in net.corda.data.flow.event.SessionEvent.Builder: Checks whether the 'timestamp' field has been set.
hasTimestamp() - function in net.corda.data.flow.event.external.ExternalEvent.Builder: Checks whether the 'timestamp' field has been set.
hasTimestamp() - function in net.corda.data.flow.event.external.ExternalEventResponse.Builder: Checks whether the 'timestamp' field has been set.
hasTimestamp() - function in net.corda.data.ledger.persistence.LedgerPersistenceRequest.Builder: Checks whether the 'timestamp' field has been set.
hasTimestamp() - function in net.corda.data.p2p.AuthenticatedMessageDeliveryState.Builder: Checks whether the 'timestamp' field has been set.
hasTimestamp() - function in net.corda.data.p2p.crypto.CommonHeader.Builder: Checks whether the 'timestamp' field has been set.
hasTimestamp() - function in net.corda.data.p2p.markers.AppMessageMarker.Builder: Checks whether the 'timestamp' field has been set.
hasTimestamp() - function in net.corda.data.packaging.CpiMetadata.Builder: Checks whether the 'timestamp' field has been set.
hasTimestamp() - function in net.corda.data.packaging.CpkMetadata.Builder: Checks whether the 'timestamp' field has been set.
hasTimestamp() - function in net.corda.data.scheduler.ScheduledTaskTrigger.Builder: Checks whether the 'timestamp' field has been set.
hasTimestamp() - function in net.corda.data.virtualnode.VirtualNodeAsynchronousRequest.Builder: Checks whether the 'timestamp' field has been set.
hasTimestamp() - function in net.corda.data.virtualnode.VirtualNodeInfo.Builder: Checks whether the 'timestamp' field has been set.
hasTimestamp() - function in net.corda.data.virtualnode.VirtualNodeManagementRequest.Builder: Checks whether the 'timestamp' field has been set.
hasTimestamp() - function in net.corda.data.virtualnode.VirtualNodeManagementResponse.Builder: Checks whether the 'timestamp' field has been set.
hasTimestamp() - function in net.corda.ledger.utxo.verification.TransactionVerificationRequest.Builder: Checks whether the 'timestamp' field has been set.
hasTimeWindowLowerBound() - function in net.corda.data.uniqueness.UniquenessCheckRequestAvro.Builder: Checks whether the 'timeWindowLowerBound' field has been set.
hasTimeWindowLowerBound() - function in net.corda.data.uniqueness.UniquenessCheckResultTimeWindowOutOfBoundsAvro.Builder: Checks whether the 'timeWindowLowerBound' field has been set.
hasTimeWindowUpperBound() - function in net.corda.data.uniqueness.UniquenessCheckRequestAvro.Builder: Checks whether the 'timeWindowUpperBound' field has been set.
hasTimeWindowUpperBound() - function in net.corda.data.uniqueness.UniquenessCheckResultTimeWindowOutOfBoundsAvro.Builder: Checks whether the 'timeWindowUpperBound' field has been set.
hasTlsCertificates() - function in net.corda.data.p2p.GatewayTlsCertificates.Builder: Checks whether the 'tlsCertificates' field has been set.
hasTlsCertificates() - function in net.corda.data.p2p.HostedIdentityEntry.Builder: Checks whether the 'tlsCertificates' field has been set.
hasTlsTenantId() - function in net.corda.data.p2p.HostedIdentityEntry.Builder: Checks whether the 'tlsTenantId' field has been set.
hasTokenClaims() - function in net.corda.data.ledger.utxo.token.selection.state.TokenPoolCacheState.Builder: Checks whether the 'tokenClaims' field has been set.
hasTokenId() - function in net.corda.data.membership.db.request.command.AddPreAuthToken.Builder: Checks whether the 'tokenId' field has been set.
hasTokenId() - function in net.corda.data.membership.db.request.command.ConsumePreAuthToken.Builder: Checks whether the 'tokenId' field has been set.
hasTokenId() - function in net.corda.data.membership.db.request.command.RevokePreAuthToken.Builder: Checks whether the 'tokenId' field has been set.
hasTokenId() - function in net.corda.data.membership.db.request.query.QueryPreAuthToken.Builder: Checks whether the 'tokenId' field has been set.
hasTokenRefs() - function in net.corda.data.ledger.utxo.token.selection.data.TokenCachedSyncCheck.Builder: Checks whether the 'tokenRefs' field has been set.
hasTokenRefs() - function in net.corda.data.ledger.utxo.token.selection.data.TokenUnspentSyncCheck.Builder: Checks whether the 'tokenRefs' field has been set.
hasTokens() - function in net.corda.data.membership.db.response.query.PreAuthTokenQueryResponse.Builder: Checks whether the 'tokens' field has been set.
hasTokenType() - function in net.corda.data.ledger.utxo.token.selection.key.TokenPoolCacheKey.Builder: Checks whether the 'tokenType' field has been set.
hasTopic() - function in net.corda.data.flow.event.external.ExternalEvent.Builder: Checks whether the 'topic' field has been set.
hasTotalBalance() - function in net.corda.data.ledger.utxo.token.selection.data.TokenBalanceQueryResult.Builder: Checks whether the 'totalBalance' field has been set.
hasTotalBalanceBuilder() - function in net.corda.data.ledger.utxo.token.selection.data.TokenBalanceQueryResult.Builder: Checks whether the 'totalBalance' field has an active Builder instance The available balance plus the balance of claimed tokens
hasTraceId() - function in net.corda.data.p2p.app.AuthenticatedMessageHeader.Builder: Checks whether the 'traceId' field has been set.
hasTransaction() - function in net.corda.data.ledger.persistence.PersistTransaction.Builder: Checks whether the 'transaction' field has been set.
hasTransaction() - function in net.corda.data.ledger.persistence.PersistTransactionIfDoesNotExist.Builder: Checks whether the 'transaction' field has been set.
hasTransaction() - function in net.corda.ledger.utxo.verification.TransactionVerificationRequest.Builder: Checks whether the 'transaction' field has been set.
hasTransactionId() - function in net.corda.data.ledger.persistence.UtxoTransactionOutput.Builder: Checks whether the 'transactionId' field has been set.
hasTransactionId() - function in net.corda.data.ledger.utxo.StateRef.Builder: Checks whether the 'transactionId' field has been set.
hasTransactionIdBuilder() - function in net.corda.data.ledger.utxo.StateRef.Builder: Checks whether the 'transactionId' field has an active Builder instance The id of the transaction in which the referenced state was created.
hasTransactionOutputs() - function in net.corda.data.ledger.persistence.UtxoTransactionOutputs.Builder: Checks whether the 'transactionOutputs' field has been set.
hasTransactionStatus() - function in net.corda.data.ledger.persistence.FindSignedLedgerTransaction.Builder: Checks whether the 'transactionStatus' field has been set.
hasTransactionStatus() - function in net.corda.data.ledger.persistence.FindTransaction.Builder: Checks whether the 'transactionStatus' field has been set.
hasTransactionStatus() - function in net.corda.data.ledger.persistence.UpdateTransactionStatus.Builder: Checks whether the 'transactionStatus' field has been set.
hasTransientFailureCount() - function in net.corda.data.ledger.utxo.token.selection.state.TokenSyncState.Builder: Checks whether the 'transientFailureCount' field has been set.
hasTrustedCertificates() - function in net.corda.data.p2p.GatewayTruststore.Builder: Checks whether the 'trustedCertificates' field has been set.
hasTrustedCertificates() - function in net.corda.data.p2p.gateway.certificates.RevocationCheckRequest.Builder: Checks whether the 'trustedCertificates' field has been set.
hasTtl() - function in net.corda.data.membership.db.request.command.AddPreAuthToken.Builder: Checks whether the 'ttl' field has been set.
hasTtl() - function in net.corda.data.membership.preauth.PreAuthToken.Builder: Checks whether the 'ttl' field has been set.
hasTtl() - function in net.corda.data.p2p.app.AuthenticatedMessageHeader.Builder: Checks whether the 'ttl' field has been set.
hasTxId() - function in net.corda.data.uniqueness.UniquenessCheckRequestAvro.Builder: Checks whether the 'txId' field has been set.
hasTxId() - function in net.corda.data.uniqueness.UniquenessCheckResponseAvro.Builder: Checks whether the 'txId' field has been set.
hasType() - function in net.corda.data.flow.state.external.ExternalEventStateStatus.Builder: Checks whether the 'type' field has been set.
hasType() - function in net.corda.data.flow.state.waiting.SessionConfirmation.Builder: Checks whether the 'type' field has been set.
hasType() - function in net.corda.data.packaging.CorDappManifest.Builder: Checks whether the 'type' field has been set.
hasType() - function in net.corda.data.packaging.CpkMetadata.Builder: Checks whether the 'type' field has been set.
hasUndeliveredMessages() - function in net.corda.data.flow.state.session.SessionProcessState.Builder: Checks whether the 'undeliveredMessages' field has been set.
hasUniquenessDdlConnection() - function in net.corda.data.virtualnode.VirtualNodeCreateRequest.Builder: Checks whether the 'uniquenessDdlConnection' field has been set.
hasUniquenessDdlConnectionId() - function in net.corda.data.virtualnode.VirtualNodeCreateResponse.Builder: Checks whether the 'uniquenessDdlConnectionId' field has been set.
hasUniquenessDdlConnectionId() - function in net.corda.data.virtualnode.VirtualNodeInfo.Builder: Checks whether the 'uniquenessDdlConnectionId' field has been set.
hasUniquenessDdlConnectionId() - function in net.corda.data.virtualnode.VirtualNodeUpgradeResponse.Builder: Checks whether the 'uniquenessDdlConnectionId' field has been set.
hasUniquenessDmlConnection() - function in net.corda.data.virtualnode.VirtualNodeCreateRequest.Builder: Checks whether the 'uniquenessDmlConnection' field has been set.
hasUniquenessDmlConnectionId() - function in net.corda.data.virtualnode.VirtualNodeCreateResponse.Builder: Checks whether the 'uniquenessDmlConnectionId' field has been set.
hasUniquenessDmlConnectionId() - function in net.corda.data.virtualnode.VirtualNodeInfo.Builder: Checks whether the 'uniquenessDmlConnectionId' field has been set.
hasUniquenessDmlConnectionId() - function in net.corda.data.virtualnode.VirtualNodeUpgradeResponse.Builder: Checks whether the 'uniquenessDmlConnectionId' field has been set.
hasUnknownStates() - function in net.corda.data.uniqueness.UniquenessCheckResultInputStateUnknownAvro.Builder: Checks whether the 'unknownStates' field has been set.
hasUnknownStates() - function in net.corda.data.uniqueness.UniquenessCheckResultReferenceStateUnknownAvro.Builder: Checks whether the 'unknownStates' field has been set.
hasUnscaledValue() - function in net.corda.data.ledger.utxo.token.selection.data.TokenAmount.Builder: Checks whether the 'unscaledValue' field has been set.
hasUpdate() - function in net.corda.data.membership.db.request.command.UpdateGroupParameters.Builder: Checks whether the 'update' field has been set.
hasUpdateActor() - function in net.corda.data.config.ConfigurationManagementRequest.Builder: Checks whether the 'updateActor' field has been set.
hasUpdateActor() - function in net.corda.data.virtualnode.VirtualNodeCreateRequest.Builder: Checks whether the 'updateActor' field has been set.
hasUpdateActor() - function in net.corda.data.virtualnode.VirtualNodeDBResetRequest.Builder: Checks whether the 'updateActor' field has been set.
hasUpdateActor() - function in net.corda.data.virtualnode.VirtualNodeStateChangeRequest.Builder: Checks whether the 'updateActor' field has been set.
hasUpdatedMember() - function in net.corda.data.membership.actions.request.DistributeMemberInfo.Builder: Checks whether the 'updatedMember' field has been set.
hasUpdatedMemberBuilder() - function in net.corda.data.membership.actions.request.DistributeMemberInfo.Builder: Checks whether the 'updatedMember' field has an active Builder instance The member which has been updated.
hasUpdateTimestamp() - function in net.corda.data.permissions.ChangeDetails.Builder: Checks whether the 'updateTimestamp' field has been set.
hasUsage() - function in net.corda.data.certificates.rpc.request.CertificateRpcRequest.Builder: Checks whether the 'usage' field has been set.
hasUsedTokenStateRefs() - function in net.corda.data.ledger.utxo.token.selection.data.TokenClaimRelease.Builder: Checks whether the 'usedTokenStateRefs' field has been set.
hasValue() - function in net.corda.data.KeyValuePair.Builder: Checks whether the 'value' field has been set.
hasValue() - function in net.corda.data.config.Configuration.Builder: Checks whether the 'value' field has been set.
hasValue() - function in net.corda.data.crypto.wire.CryptoStringResult.Builder: Checks whether the 'value' field has been set.
hasValue() - function in net.corda.data.demo.DemoRecord.Builder: Checks whether the 'value' field has been set.
hasValue() - function in net.corda.data.demo.DemoStateRecord.Builder: Checks whether the 'value' field has been set.
hasValue() - function in net.corda.data.flow.state.waiting.WaitingFor.Builder: Checks whether the 'value' field has been set.
hasValue() - function in net.corda.data.permissions.Property.Builder: Checks whether the 'value' field has been set.
hasVaultDbOperationalStatus() - function in net.corda.data.virtualnode.VirtualNodeCreateResponse.Builder: Checks whether the 'vaultDbOperationalStatus' field has been set.
hasVaultDbOperationalStatus() - function in net.corda.data.virtualnode.VirtualNodeInfo.Builder: Checks whether the 'vaultDbOperationalStatus' field has been set.
hasVaultDbOperationalStatus() - function in net.corda.data.virtualnode.VirtualNodeStateChangeResponse.Builder: Checks whether the 'vaultDbOperationalStatus' field has been set.
hasVaultDbOperationalStatus() - function in net.corda.data.virtualnode.VirtualNodeUpgradeResponse.Builder: Checks whether the 'vaultDbOperationalStatus' field has been set.
hasVaultDdlConnection() - function in net.corda.data.virtualnode.VirtualNodeCreateRequest.Builder: Checks whether the 'vaultDdlConnection' field has been set.
hasVaultDdlConnectionId() - function in net.corda.data.virtualnode.VirtualNodeCreateResponse.Builder: Checks whether the 'vaultDdlConnectionId' field has been set.
hasVaultDdlConnectionId() - function in net.corda.data.virtualnode.VirtualNodeInfo.Builder: Checks whether the 'vaultDdlConnectionId' field has been set.
hasVaultDdlConnectionId() - function in net.corda.data.virtualnode.VirtualNodeUpgradeResponse.Builder: Checks whether the 'vaultDdlConnectionId' field has been set.
hasVaultDmlConnection() - function in net.corda.data.virtualnode.VirtualNodeCreateRequest.Builder: Checks whether the 'vaultDmlConnection' field has been set.
hasVaultDmlConnectionId() - function in net.corda.data.virtualnode.VirtualNodeCreateResponse.Builder: Checks whether the 'vaultDmlConnectionId' field has been set.
hasVaultDmlConnectionId() - function in net.corda.data.virtualnode.VirtualNodeInfo.Builder: Checks whether the 'vaultDmlConnectionId' field has been set.
hasVaultDmlConnectionId() - function in net.corda.data.virtualnode.VirtualNodeUpgradeResponse.Builder: Checks whether the 'vaultDmlConnectionId' field has been set.
hasVendor() - function in net.corda.data.packaging.CorDappManifest.Builder: Checks whether the 'vendor' field has been set.
hasVerificationFailure() - function in net.corda.ledger.utxo.verification.TransactionVerificationResponse.Builder: Checks whether the 'verificationFailure' field has been set.
hasVerificationFailureBuilder() - function in net.corda.ledger.utxo.verification.TransactionVerificationResponse.Builder: Checks whether the 'verificationFailure' field has an active Builder instance Transaction verification failure if verification wasn't successful see TransactionVerificationFailure.
hasVerificationRequest() - function in net.corda.data.membership.command.registration.member.ProcessMemberVerificationRequest.Builder: Checks whether the 'verificationRequest' field has been set.
hasVerificationRequestBuilder() - function in net.corda.data.membership.command.registration.member.ProcessMemberVerificationRequest.Builder: Checks whether the 'verificationRequest' field has an active Builder instance Request from an MGM to verify a member's data supplied in the registration request.
hasVerificationResponse() - function in net.corda.data.membership.command.registration.mgm.ProcessMemberVerificationResponse.Builder: Checks whether the 'verificationResponse' field has been set.
hasVerificationResponseBuilder() - function in net.corda.data.membership.command.registration.mgm.ProcessMemberVerificationResponse.Builder: Checks whether the 'verificationResponse' field has an active Builder instance Response from a member to verify its data supplied in the registration request.
hasVerificationStatus() - function in net.corda.ledger.utxo.verification.TransactionVerificationResponse.Builder: Checks whether the 'verificationStatus' field has been set.
hasVersion() - function in net.corda.data.config.Configuration.Builder: Checks whether the 'version' field has been set.
hasVersion() - function in net.corda.data.config.ConfigurationManagementRequest.Builder: Checks whether the 'version' field has been set.
hasVersion() - function in net.corda.data.config.ConfigurationManagementResponse.Builder: Checks whether the 'version' field has been set.
hasVersion() - function in net.corda.data.membership.StaticNetworkInfo.Builder: Checks whether the 'version' field has been set.
hasVersion() - function in net.corda.data.membership.db.request.command.PersistGroupPolicy.Builder: Checks whether the 'version' field has been set.
hasVersion() - function in net.corda.data.membership.db.response.query.GroupPolicyQueryResponse.Builder: Checks whether the 'version' field has been set.
hasVersion() - function in net.corda.data.packaging.CpiIdentifier.Builder: Checks whether the 'version' field has been set.
hasVersion() - function in net.corda.data.packaging.CpiMetadata.Builder: Checks whether the 'version' field has been set.
hasVersion() - function in net.corda.data.packaging.CpkIdentifier.Builder: Checks whether the 'version' field has been set.
hasVersion() - function in net.corda.data.packaging.CpkManifest.Builder: Checks whether the 'version' field has been set.
hasVersion() - function in net.corda.data.permissions.Group.Builder: Checks whether the 'version' field has been set.
hasVersion() - function in net.corda.data.permissions.Permission.Builder: Checks whether the 'version' field has been set.
hasVersion() - function in net.corda.data.permissions.Property.Builder: Checks whether the 'version' field has been set.
hasVersion() - function in net.corda.data.permissions.Role.Builder: Checks whether the 'version' field has been set.
hasVersion() - function in net.corda.data.permissions.User.Builder: Checks whether the 'version' field has been set.
hasVersion() - function in net.corda.data.virtualnode.VirtualNodeInfo.Builder: Checks whether the 'version' field has been set.
hasVersion() - function in net.corda.ledger.utxo.verification.CordaPackageSummary.Builder: Checks whether the 'version' field has been set.
hasVersionBuilder() - function in net.corda.data.packaging.CpkManifest.Builder: Checks whether the 'version' field has an active Builder instance
hasVersionId() - function in net.corda.data.packaging.CorDappManifest.Builder: Checks whether the 'versionId' field has been set.
hasViewOwner() - function in net.corda.data.membership.PersistentGroupParameters.Builder: Checks whether the 'viewOwner' field has been set.
hasViewOwnerBuilder() - function in net.corda.data.membership.PersistentGroupParameters.Builder: Checks whether the 'viewOwner' field has an active Builder instance The owner of the group parameters view.
hasViewOwningMember() - function in net.corda.data.membership.PersistentMemberInfo.Builder: Checks whether the 'viewOwningMember' field has been set.
hasViewOwningMemberBuilder() - function in net.corda.data.membership.PersistentMemberInfo.Builder: Checks whether the 'viewOwningMember' field has an active Builder instance Holding identity of the member owning the data view.
hasVirtualNode() - function in net.corda.data.permissions.Permission.Builder: Checks whether the 'virtualNode' field has been set.
hasVirtualNode() - function in net.corda.data.permissions.summary.PermissionSummary.Builder: Checks whether the 'virtualNode' field has been set.
hasVirtualNodeId() - function in net.corda.data.permissions.management.PermissionManagementRequest.Builder: Checks whether the 'virtualNodeId' field has been set.
hasVirtualNodeShortHash() - function in net.corda.data.virtualnode.VirtualNodeUpgradeRequest.Builder: Checks whether the 'virtualNodeShortHash' field has been set.
hasVisibleStatesIndexes() - function in net.corda.data.ledger.persistence.PersistTransaction.Builder: Checks whether the 'visibleStatesIndexes' field has been set.
hasWaitingFor() - function in net.corda.data.flow.state.checkpoint.FlowState.Builder: Checks whether the 'waitingFor' field has been set.
hasWaitingForBuilder() - function in net.corda.data.flow.state.checkpoint.FlowState.Builder: Checks whether the 'waitingFor' field has an active Builder instance What this flow requires in order to continue execution.
hasX500Name() - function in net.corda.data.identity.HoldingIdentity.Builder: Checks whether the 'x500Name' field has been set.
hasX500Name() - function in net.corda.data.virtualnode.VirtualNodeCreateResponse.Builder: Checks whether the 'x500Name' field has been set.
hasX500Name() - function in net.corda.data.virtualnode.VirtualNodeUpgradeResponse.Builder: Checks whether the 'x500Name' field has been set.
HeartbeatMessage - class in net.corda.data.p2p: A heartbeat message used to monitor the health of an outbound link session
HeartbeatMessage.Builder - class in net.corda.data.p2p.HeartbeatMessage: RecordBuilder for HeartbeatMessage instances.
HeartbeatMessageAck - class in net.corda.data.p2p: Sent between the receiving and sending Link Managers to acknowledge successful delivery of a net.corda.data.p2p.HeartbeatMessage.
HeartbeatMessageAck.Builder - class in net.corda.data.p2p.HeartbeatMessageAck: RecordBuilder for HeartbeatMessageAck instances.
hexToBase58(java.lang.String) - function in net.corda.v5.base.util.EncodingUtils: Encoding changer.
hexToBase64(java.lang.String) - function in net.corda.v5.base.util.EncodingUtils: Encoding changer.
hexToByteArray(java.lang.String) - function in net.corda.v5.base.util.EncodingUtils: Hex-String to byte[].
hexToRealString(java.lang.String) - function in net.corda.v5.base.util.EncodingUtils: HEX-String to the actual real String, that is "48656C6C6F20576F726C64" to "Hello World".
HoldingIdentity - class in net.corda.data.identity
HoldingIdentity.Builder - class in net.corda.data.identity.HoldingIdentity: RecordBuilder for HoldingIdentity instances.
HostedIdentityEntry - class in net.corda.data.p2p
HostedIdentityEntry.Builder - class in net.corda.data.p2p.HostedIdentityEntry: RecordBuilder for HostedIdentityEntry instances.
HostedIdentitySessionKeyAndCert - class in net.corda.data.p2p: A session key and and certificate chain
HostedIdentitySessionKeyAndCert.Builder - class in net.corda.data.p2p.HostedIdentitySessionKeyAndCert: RecordBuilder for HostedIdentitySessionKeyAndCert instances.
HSMAssociationInfo - class in net.corda.data.crypto.wire.hsm: Defines information for HSM association.
HSMAssociationInfo.Builder - class in net.corda.data.crypto.wire.hsm.HSMAssociationInfo: RecordBuilder for HSMAssociationInfo instances.
HSMRegistrationRequest - class in net.corda.data.crypto.wire.hsm.registration: Internal over-the-wire HSM registration request envelope.
HSMRegistrationRequest.Builder - class in net.corda.data.crypto.wire.hsm.registration.HSMRegistrationRequest: RecordBuilder for HSMRegistrationRequest instances.
HSMRegistrationResponse - class in net.corda.data.crypto.wire.hsm.registration: Internal over-the-wire HSM registration response envelope.
HSMRegistrationResponse.Builder - class in net.corda.data.crypto.wire.hsm.registration.HSMRegistrationResponse: RecordBuilder for HSMRegistrationResponse instances.

A B C D E F G H I J K L M N O P Q R S T U V W