R3 Docs R3 Docs Home

Back end guide

The Bank in a Box application allows a user to replicate standard banking application services on Corda. These services include:

  • Accounts
  • Deposits and withdrawals
  • Loans
  • Reports and views

These services are implemented utilizing specific Corda features, demonstrating best practices for how a banking application should be built on Corda. Below you can read more on how the following features are implemented:

  • Flows
  • Accounts SDK
  • Scheduled states
  • Oracles
  • CorDapp integration with external systems

The Bank in a Box application utilities the Accounts SDK to implement current and savings accounts for bank customers. The Accounts SDK is a library which allows a Corda node to partition the vault into a number of subsets, where each subset represents an account. Bank in a Box shows you how to implement this feature in your own banking application.

The business logic behind Bank in a Box accounts is explained below, addressing:

The status of an account can be PENDING, when an account is first created and is awaiting approval, ACTIVE or SUSPENDED, where all account activity is frozen. There is a limit to status transitions, for example, an account that has been approved can never be set to status pending. An extension function has been implemented to verify the status transitions.

fun AccountStatus.canProgressToStatus(accountStatus: AccountStatus) =
    when(this) {
        AccountStatus.SUSPENDED -> accountStatus == AccountStatus.ACTIVE
        AccountStatus.PENDING -> accountStatus == AccountStatus.ACTIVE || accountStatus == AccountStatus.SUSPENDED
        AccountStatus.ACTIVE -> accountStatus == AccountStatus.SUSPENDED
    }

The generateMappedObject method returns a representation of the given schema, and for the Account interface it is implemented as follows:

override fun generateMappedObject(schema: MappedSchema): PersistentState {
    return when (schema) {
        is AccountStateSchemaV1 -> AccountStateSchemaV1.PersistentBalance(
                this.accountInfo.identifier.id,
                this.balance.quantity,
                this.txDate,
                this.status,
                this.customerId,
                this.linearId.id)
        else -> throw IllegalArgumentException("Unrecognised schema $schema")
    }
}

The CreditAccount interface adds the additional properties withdrawalDailyLimit and transferDailyLimit, and the above method needs to be overridden in order for these properties to be accessible within the schema.

The following shows how these properties can be added to the mapped object listed above:

override fun generateMappedObject(schema: MappedSchema): PersistentState {
    val persistentState = super.generateMappedObject(schema)
    if (persistentState !is AccountStateSchemaV1.PersistentBalance) {
        throw IllegalArgumentException("Schema $schema is not a AccountStateSchemaV1.PersistentBalance schema type")
    }

    persistentState.withdrawalDailyLimit = withdrawalDailyLimit
    persistentState.transferDailyLimit = transferDailyLimit

    return persistentState
}

The CurrentAccountState extends the CreditAccount to support overdrawn balances up to an approved limit, and is facilitated with the following properties: overdraftBalance and approvedOverdraftLimit. The overdraftBalance property tracks the debit amount on the account and the approvedOverdraftLimit sets the maximum debited amount allowed. The withdraw method can be adapted as follows to allow overdraft withdrawals:

override fun withdraw(amount: Amount<TokenType>): CurrentAccountState {
    verifyHasSufficientFunds()
    verifyIsActive()

    return if(accountData.balance >= amount) {
        val updatedAccountData = accountData.copy(
                balance = accountData.balance - amount,
                txDate = Instant.now())
            copy(accountData = updatedAccountData)
        } else {
            val updatedOverdraftBalance = (overdraftBalance ?: 0L) + amount.quantity - accountData.balance.quantity
            val updatedAccountData = accountData.copy(
                    balance = 0 of accountData.balance.token,
                    txDate = Instant.now())
            copy(overdraftBalance = updatedOverdraftBalance, accountData = updatedAccountData)
        }
}

The method checks that the account has sufficient funds - in either the account balance or the approvedOverdraftLimit - and also that the account is active. If there are sufficient funds on the account balance, the account is debited as normal. Otherwise, balance is set to zero and overdraftBalance is set to the withdrawal amount with the available account balance deducted.

Corda uses the Kryo serializer to serialize objects on the call stack when suspending flows. There are known issues serializing JPA entity objects, particularly if they use one to many relationships or other complex structures. One approach to overcome this is to map entity objects to data classes, referred to as Data Transfer Objects (DTOs), for use within flows. Another approach is to implement custom serializers that generate the serialization for Kryo.

A custom serializer for a JPA entity can be specified with the DefaultSerializer annotation:

@Entity
@Table(name = "customer")
@DefaultSerializer(CustomerSchemaSerializer::class)
@CordaSerializable
class Customer (
)

A custom serializer should extend the Kryo Serializer abstract class, and implement the read and write methods. The following is a modified example of the CustomerSchemaSerializer class:

class CustomerSchemaSerializer : Serializer<CustomerSchemaV1.Customer>() {
    override fun write(kryo: Kryo, output: Output, `object`: CustomerSchemaV1.Customer) {
        output.writeString(`object`.createdOn.toString())
    }

    override fun read(
        kryo: Kryo,
        input: Input,
        type: Class<CustomerSchemaV1.Customer>?
    ): CustomerSchemaV1.Customer? {

        val createdOn = Instant.parse(input.readString())
        return CustomerSchemaV1.Customer(
            createdOn = createdOn,
            modifiedOn = Instant.now(),
            customerName = "",
            contactNumber = "",
            emailAddress = "",
            postCode = "",
            attachments = listOf())
    }

The above shows the serialization of the createdOn property in the Customer schema class. The write method tells Kryo explicitly how to serialize the object of type CustomerSchemaV1.Customer, and in this case, it simply converts the createdOn property into a string and writes it to the output. Similarly, the read method tells Kryo how to deserialize the stored properties and recreate an instance of CustomerSchemaV1.Customer. The createdOn property value is set by reading a single string from the input and uses the Instant.parse method to parse the string into an Instant type. An instance of the Customer schema class is created using the deserialized createdOn value (and in this example using empty values for the other properties that were not serialized), and is returned.

Using the flows in this section, several account-related tasks can be accomplished. You can:

To create a new customer, use the CreateCustomerFlow. This flow also adds personal details and contact information, and returns the customer ID.

CreateCustomerFlow(customerName: String, contactNumber: String, emailAddress: String, postCode: String, attachments: List<Pair<SecureHash, String>>): UUID

  • customerName: Customer name.
  • contactNumber: Customer phone number.
  • emailAddress: Customer email address.
  • postCode: Post code of customer’s address.
  • attachments: List of SecureHash, String pairs with references to the Corda attachments of additional customer documentation. For more information on the standard process for uploading attachments to Corda, see the documentation on CorDapp Contract Attachments.

This flows returns UUID, the customer ID.

Use UpdateCustomerFlow to update customer information including customer name, post code, contact number, and email address. You can also append a new attachment used for identity verification.

UpdateCustomerFlow(customerId: UUID, customerName: String?, postCode: String?, contactNumber: String?, emailAddress: String?, attachments: List<Pair<SecureHash, String>>?)

  • customerId: UUID - The ID of the customer’s profile.
  • customerName: Customer name.
  • contactNumber: Customer phone number.
  • emailAddress: Customer email address.
  • postCode: Post code of customer’s address.
  • attachments: List of SecureHash, String pairs with references to the Corda attachments of additional customer documentation.

This flow returns a merged attachments list, comprised of customer.attachments and this.attachment.

Use CreateCurrentAccountFlow to create a zero balance current account for the customer with ID customerId, optionally specifying a withdrawal and/or transfer daily limit.

CreateCurrentAccountFlow(customerId: UUID, tokenType: Currency, withdrawalDailyLimit: Long?, transferDailyLimit: Long?): SignedTransaction

  • customerId: UUID - The ID of the customer’s profile.
  • tokenType: Currency - The currency of the customer’s profile.
  • withdrawalDailyLimit(optional): This sets a daily limit on withdrawal amount.
  • transferDailyLimit(optional): This sets a daily limit on transfer amount.

SignedTransaction is returned when a flow has successfully updated the ledger, in this case when the account has been created.

To create a savings account, use CreateSavingsAccountFlow. This creates a zero balance savings account for a customer with ID customerId.

CreateSavingsAccountFlow(customerId: UUID, tokenType: Currency): SignedTransaction

  • customerId: UUID - The ID of the customer’s profile.
  • tokenType: Currency - The currency of the customer’s profile.

SignedTransaction is returned when a flow has successfully updated the ledger, in this case when the savings account has been created.

SetAccountStatusFlow updates the status of the account with ID accountId. You can use this flow to manually approve a pending account by setting the status to ACTIVE, or to suspend or reactivate an account, by setting the status to SUSPENDED or ACTIVE, respectively.

SetAccountStatusFlow(accountId: UUID, accountStatus: AccountStatus): SignedTransaction

  • accountId: UUID - The ID of a customer account.
  • accountStatus: AccountStatus - Active or Suspended.

SignedTransaction is returned when a flow has successfully updated the ledger, in this case when the status of the account has been updated.

Use SetAccountLimitsFlow to change the daily limits, or maximum spending, for the provided account.

SetAccountLimitsFlow(accountId: UUID, withdrawalDailyLimit: Long?, transferDailyLimit: Long?): SignedTransaction

  • accountId: UUID of a current account.
  • withdrawalDailyLimit: Daily limit on amount the customer can withdraw.
  • transferDailyLimit: Daily limit on amount the customer can transfer.

SignedTransaction is returned when a flow has successfully updated the ledger, in this case when the account limits are changed.

Use ApproveOverdraftFlow to approve an overdraft limit for the account with ID accountId.

ApproveOverdraftFlow(accountId: UUID, amount: Amount<Currency>): SignedTransaction

  • accountId: UUID - The ID of a current account.
  • amount: Overdraft amount approved.

SignedTransaction is returned when a flow has successfully updated the ledger, in this case when the overdraft limit has been set.

val supportingDocumentationPath = File("/path/to/supportDocumentation.zip")

val attachment = serviceHub.attachments.importAttachment(
        supportingDocumentationPath.inputStream(),
        ourIdentity.toString(),
        supportingDocumentationPath.name)

val attachments = listOf(Pair(attachment, "Supporting documentation"))

val customerId = subFlow(
    CreateCustomerFlow(
        customerName = "AN Other",
        contactNumber = "5551234",
        emailAddress = "[email protected]",
        postCode = "ZIP 1234",
        attachments = attachments))

val signedTx = subFlow(
    CreateCurrentAccount(
        customerId = customerId,
        tokenType = Currency.getInstance("EUR"),
        withdrawalDailyLimit = 500,
        transferDailyLimit = 1000))

val accountId = signedTx.tx.outputsOfType<CurrentAccountState>().single().accountId

subFlow(SetAccountStatusFlow(accountId, AccountStatus.ACTIVE))

val amount = Amount(10000, Currency.getInstance("EUR")) // 100 euro
subFlow(ApproveOverdraftFlow(accountId, amount))

The Bank in a Box application uses Oracles in various contexts, one of which is in the issuance of loans. A dummy Oracle is used to call external services based on a customer ID and sign off on the loan. The response is then embedded in the transaction that issues the loan. This mimics a real-life scenario where a bank calls a rating provider before giving a customer a loan.

Oracle signatures use partial Merkle tree signing, which provides privacy for the transaction. In this way, the external party present in the loan issuance transaction can only see the contents of the transaction that they must confirm before signing the transaction.

When a loan is issued, money is transferred to the customer’s current account. In the background, this transaction uses Corda scheduled states to create a recurring payment for that loan, into the loan account.

The business logic behind Bank in a Box loans is explained below, addressing:

The off-ledger credit rating web service implements a REST API and the following describes the approach to query this service within a flow.

The web service request is blocking and needs to be executed outside of the flow execution thread. Flow external operations are designed for this purpose and its execute method can be overridden with the desired blocking behaviour. The following is a skeleton implementation of the credit rating request class:

class CreditRatingRequestOperation(
    val customerId: UUID,
    private val creditRatingServiceAddr: String): FlowExternalOperation<CreditRatingInfo> {

    companion object {
        val httpClient: OkHttpClient =  OkHttpClient.Builder().build()
    }

    @Suspendable
    override fun execute(deduplicationId: String): CreditRatingInfo {
        // implement REST API client request
    }
}

The REST API URL is generated from the credit rating service server address and the customer ID to query. The request is made using the httpClient and the response is deserialized into a CreditRatingInfo instance using the objectMapper.

The above request can then be called within a flow:

@StartableByRPC
class GetCustomerCreditRatingFlow(val customerId: UUID) : FlowLogic<CreditRatingInfo>() {

    @Suspendable
    override fun call(): CreditRatingInfo {
        return await(CreditRatingRequestOperation(customerId, serviceHub))
    }
}

A node can request a command asserting a fact from an Oracle. The following shows an example implementation of a request flow:

@InitiatingFlow
class OracleSignCreditRatingRequestFlow(
    val tx: TransactionBuilder,
    val oracle: Party,
    val partialMerkleTx: FilteredTransaction) : FlowLogic<TransactionSignature>() {

    @Suspendable
    override fun call(): TransactionSignature {
        val oracleSession = initiateFlow(oracle)
        val resp = oracleSession.sendAndReceive<TransactionSignature>(partialMerkleTx)

        return resp.unwrap { sig ->
            check(oracleSession.counterparty.owningKey.isFulfilledBy(listOf(sig.by)))
            tx.toWireTransaction(serviceHub).checkSignature(sig)
            sig
        }
    }
}

The flow initiates a session with the Oracle and the filtered transaction containing the command to be verified is sent. The Oracle verifies the filtered transaction and returns a signature (see below). The request receives the signature and it is checked against the transaction tx to ensure the signature is valid for that transaction.

The Oracle implements the responder flow. The following is an example of a skeleton implementation:

@InitiatedBy(OracleSignCreditRatingRequestFlow::class)
class OracleSignCreditRatingRequestFlowResponder(val otherSession: FlowSession) : FlowLogic<Unit>() {
    @Suspendable
    override fun call() {
        val filteredTx = otherSession.receive<FilteredTransaction>().unwrap { it }

        // Here the method performs two checks:
        // Verifies that the command information is visible and that it has the appropriate signer

        // Verifies the command

        val signatureMetadata = SignatureMetadata(
            serviceHub.myInfo.platformVersion,
            Crypto.findSignatureScheme(ourIdentity.owningKey).schemeNumberID)

        val signableData = SignableData(filteredTx.id, signatureMetadata)
        val signature = serviceHub.keyManagementService.sign(signableData, ourIdentity.owningKey)

        otherSession.send(signature)
    }
}

The Oracle receives the filtered transaction and checks that the command to be verified is visible and that the Oracle is a requested signer (implementation not shown). The command is verified (again, implementation not shown), a signature is created and returned to the requesting flow. It is possible to send the signed transaction, however only the signature is required in this case.

The credit rating Oracle verifies the credit rating of a customer contained within the VerifyCreditRating command, and signs the transaction if the rating is valid. The command is created as follows:

val oracle: Party = ConfigurationUtils.getConfiguredOracle(serviceHub)

val creditRatingInfo = subFlow(GetCustomerCreditRatingFlow(customerId))

val creditRatingThreshold = ConfigurationUtils.getCreditRatingThreshold(serviceHub)
val creditRatingValidityDuration = ConfigurationUtils.getCreditRatingValidityDuration(serviceHub)

val verifyCreditRatingCommand = Command(
    VerifyCreditRating(
        creditRatingInfo = creditRatingInfo,
        creditRatingThreshold = creditRatingThreshold,
        oracleKey = oracle.owningKey,
        dateStart = Instant.now(),
        validityPeriod = creditRatingValidityDuration),
    listOf(ourIdentity.owningKey, oracle.owningKey))

The command is added to the transaction and the transaction is filtered to tear-off transaction details unrelated to the Oracle. In this case, only details related to the VerifyCreditRating command are kept.

val mtx = partStx.buildFilteredTransaction(
    Predicate {
        it is Command<*> && it.value is VerifyCreditRating && oracle.owningKey in it.signers
    })

The above creates a filtered transaction containing only a VerifyCreditRating command where the Oracle is a signer. The Oracle can now be requested to sign the transaction.

val txtSignature = subFlow(OracleSignCreditRatingRequestFlow(txBuilder, oracle, mtx))
val oracleSignedTxt = partStx.withAdditionalSignature(txtSignature)

val tx =  subFlow(FinalityFlow(oracleSignedTxt, emptyList()))

And the contract can check that the Oracle has signed:

val commandCreditRating = tx.commandsOfType<Commands.VerifyCreditRating>().single()

commandCreditRating.signers.contains(commandCreditRating.value.oracleKey)

Use the flows in this section to perform loan-related tasks. You can:

Use IssueLoanFlow to issue a new loan to a customer with the repayment account referenced by accountId. The loan amount is deposited into the repayment account given by accountId, and a new loan account is created. A recurring payment is created from the repayment account to the loan account, and the repayment amount is calculated so that the loan amount is repaid over the loan term periodInMonths. The repayment account must be a current account.

IssueLoanFlow(accountId: UUID, loan: Amount<Currency>, periodInMonths: Long): SignedTransaction

  • accountId: UUID - Customer account ID.
  • loan: amount: Loan amount.
  • periodInMonths: Long: Loan term in months.

SignedTransaction is returned when a flow has successfully updated the ledger, in this case when a new loan is issued to a customer.

GetCustomerCreditRatingFlow queries the credit rating of customer with ID customerId from the credit rating REST web server and returns a CreditRatingInfo object.

GetCustomerCreditRatingFlow(customerId: UUID): CreditRatingInfo

  • customerId: UUID - ID of a customer.
val supportingDocumentationPath = File("/path/to/supportDocumentation.zip")

val attachment = serviceHub.attachments.importAttachment(
        supportingDocumentationPath.inputStream(),
        ourIdentity.toString(),
        supportingDocumentationPath.name)

val attachments = listOf(Pair(attachment, "Supporting documentation"))

val customerId = subFlow(
    CreateCustomerFlow(
        customerName = "AN Other",
        contactNumber = "5551234",
        emailAddress = "[email protected]",
        postCode = "ZIP 1234",
        attachments = attachments))

val signedTx = subFlow(
    CreateCurrentAccount(
        customerId = customerId,
        tokenType = Currency.getInstance("EUR"),
        withdrawalDailyLimit = 500,
        transferDailyLimit = 1000))

val account = signedTx.tx.outputsOfType<CurrentAccountState>().single()
subFlow(SetAccountStatusFlow(account.accountId, AccountStatus.ACTIVE))

val amount = Amount(100000, Currency.getInstance("EUR")) // 1000 euro
subFlow(IssueLoanFlow(accountId, amount, 24))

Account deposits and withdrawals are handled by the flows described below, which are unique to the Bank in a Box CorDapp.

The business logic behind Bank in a Box withdrawals and deposits is explained below, addressing how withdrawals and deposits are implemented in the application.

After an account is fetched from the ledger, a flow calls the withdraw function on a CreditAccount object:

fun withdraw(amount: Amount<Currency>): CreditAccount

Implementation of the withdraw function is specific for each account type. For a savings account, the operation is allowed only when the account is ACTIVE, has sufficient funds, and is not within the savings period:

override fun withdraw(amount: Amount<Currency>): SavingsAccountState {
    verifyHasSufficientFunds(amount)
    verifyIsActive()
    verifyWithdrawalAllowed()
    return copy(accountData = accountData.copy(balance = accountData.balance - amount))
}

For current accounts, the operation is allowed only when the account is ACTIVE and has sufficient funds. The application supports an overdraft facility, and the approvedOverdraftLimit and overdraftBalance fields are considered when verifying that sufficient funds are available.

override fun withdraw(amount: Amount<Currency>): CurrentAccountState {
    verifyHasSufficientFunds(amount)
    verifyIsActive()

    return if(accountData.balance >= amount) {
        val updatedAccountData = accountData.copy(
                balance = accountData.balance - amount,
                txDate = Instant.now())
        copy(accountData = updatedAccountData)
    } else {
        val updatedOverdraftBalance = (overdraftBalance ?: 0L) + amount.quantity - accountData.balance.quantity
        val updatedAccountData = accountData.copy(
                balance = 0 of accountData.balance.token,
                txDate = Instant.now())
        copy(overdraftBalance = updatedOverdraftBalance, accountData = updatedAccountData)
    }
}

If the withdraw function for a specific account type passes all the verification methods and returns the account object with the amount deducted from the account’s balance, the flow then verifies that the daily withdrawal limit is not exceeded. This verification is the same for all account types, and it is implemented as an extension function on the AbstractAccountState object. It uses the transaction_log table to get the sum of all withdrawals for the account for a day and compares it with withdrawalDailyLimit if a limit has been set for the account in question. Once the Corda transaction is signed, an appropriate entry is saved to the transaction_log table.

After an account is fetched from the ledger, this flow calls the deposit function on the Account object:

fun deposit(amount: Amount<Currency>): Account

The deposit function is implemented in a similar way for the savings and loan account types, however the savings account type credits the amount to a credit balance (and should be summed) while the loan account type credits the amount to a debit balance (and should be subtracted). The following example shows the implementation of the deposit function for the savings account:

override fun deposit(amount: Amount<Currency>): SavingsAccountState {
    verifyIsActive()
    return CurrentAccountState(accountData.copy(balance = accountData.balance + amount, txDate = Instant.now()),
        withdrawalDailyLimit, transferDailyLimit, linearId)
}

The deposit function for the loan account also needs to check the balance on the account to ensure that the balance does not go into credit. The implementation is as follows:

override fun deposit(amount: Amount<Currency>): LoanAccountState {
    verifyHasSufficientFunds(amount)
    verifyIsActive()
    return copy(accountData = accountData.copy(balance = accountData.balance - amount))
}

As mentioned previously, the current account supports an overdraft balance and this should be credited prior to crediting any balance on the main account. There are three scenarios to consider:

  • The account is not overdrawn and the main balance is credited.
  • The overdraft balance is less than the deposit amount and the main balance is credited with the difference.
  • The overdraft balance is credited with the deposit amount.

This is implemented as follows:

override fun deposit(amount: Amount<Currency>): CurrentAccountState {
    verifyIsActive()

    return when {
        (overdraftBalance ?: 0L == 0L) -> {
            val updatedAccountData = accountData.copy(
                    balance = accountData.balance + amount,
                    txDate = Instant.now())
            copy(accountData = updatedAccountData)
        }
        ((overdraftBalance ?: 0L) < amount.quantity) -> {
            val updatedAccountData = accountData.copy(
                    balance = Amount((amount.quantity - (overdraftBalance ?: 0)), amount.token),
                    txDate = Instant.now())
            copy(overdraftBalance = 0L, accountData = updatedAccountData)
        }
        else -> {
            val updatedAccountData = accountData.copy(txDate = Instant.now())
            copy(overdraftBalance = (overdraftBalance ?: 0L) - amount.quantity, accountData = updatedAccountData)
        }
    }
}

Once the Corda transaction is signed, an appropriate entry is saved to the transaction_log table.

Use the flows in this section to perform tasks related to account deposits and withdrawals. You can:

Use WithdrawFiatFlow to withdraw a specified amount from an account with the provided accountId.

WithdrawFiatFlow(val accountId: UUID, val amount: Amount<Currency>) : FlowLogic<SignedTransaction>()

  • accountId: UUID - The ID of an account.
  • amount: amount to be withdrawn

This operation will fail if any of the following conditions is true:

  • The provided accountId is a reference to a loan account or savings account in savings period.
  • The specified account doesn’t have sufficient funds on accounts balance.
  • The specified account has reached daily withdrawal limit.
  • The specified account is not in ACTIVE status.

In all other cases, the operation will be successful and the specified amount will be deducted from the account’s balance. An entry will be recorded in the transaction_log table.

Using DepositFiatFlow, you can deposit a specified amount to an account with the provided accountId.

DepositFiatFlow(val accountId: UUID, val amount: Amount<Currency>) : FlowLogic<SignedTransaction>()

  • accountId: UUID - The ID of an account.
  • amount: amount to be deposited

This operation will fail if the specified account is not in ACTIVE status. In all other cases, the operation will be successful and the specified amount will be added to the account’s balance. An entry will be recorded in the transaction_log table.

For account creation examples, see account creation examples.

val amount = Amount(3000, Currency.getInstance("EUR")) // 30 euro
val signedTx = subFlow(WithdrawFiatFlow(accountId, amount))

val amount = Amount(3000, Currency.getInstance("EUR")) // 30 euro
val signedTx = subFlow(DepositFiatFlow(accountId, amount))

As noted in the Loans section, Corda scheduled states are utilized in Bank in a Box to create recurring payments that start on a given date and are executed in a specific time period.

Payments in Bank in a Box are also a good example of how CorDapps can be integrated with external systems.

The business logic behind Bank in a Box payments is explained below, addressing:

In Corda, notaries prevent the double spending of contract states but this naturally excludes off-ledger systems. Instead, Corda provides a FlowExternalOperation that is executed with a deduplicationId, allowing for custom handling of duplicate runs. Each recurring payment execution is logged and duplicate logs can be avoided by creating the payment log instance within a subclass of FlowExternalOperation.

The skeleton CreateRecurringPaymentLogOperation is as follows:

class CreateRecurringPaymentLogOperation(
    private val recurringPaymentStateAndRef: StateAndRef<RecurringPaymentState>,
    private val recurringPaymentLogRepository: RecurringPaymentLogRepository,
    private val exception: Exception? = null): FlowExternalOperation<RecurringPaymentLogSchemaV1.RecurringPaymentLog> {

}

Subclasses of the FlowExternalOperation must override the execute method, which receives the deduplicationId parameter. Payment logs are stored with the deduplicationId (in the logId column) and a new payment log is only created if the deduplicationId does not exist in the RecurringPaymentLog schema.

override fun execute(deduplicationId: String): RecurringPaymentLogSchemaV1.RecurringPaymentLog {
    var recurringPaymentLog: RecurringPaymentLogSchemaV1.RecurringPaymentLog? = null

    try {
        recurringPaymentLog = recurringPaymentLogRepository.getRecurringPaymentLogById(deduplicationId)
    } catch (e: IllegalArgumentException) {
        contextLogger().info("Recurring payment logs not found for deduplicationId: $deduplicationId, new entry will be added.")
    }
    return recurringPaymentLog?: createRecurringPaymentLog(deduplicationId)
}

Recurring payments created by the customer should be cancellable by the customer. This excludes loan repayments and savings plan payments, which are created and owned by the bank. Checking if a customer owns and can cancel a recurring payment could be accomplished with authentication. However another solution is needed in the current scope: add the destination account as a reference state to the transaction that cancels the recurring payment, and check if the account type is a LoanAccountState or a SavingsAccountState.

  1. Add the destination account to the transaction as a reference state.
val accountTo = accountRepository.getAccountStateById(recurringPayment.state.data.accountTo)

val txBuilder = TransactionBuilder(notary)
        .addInputState(recurringPayment)
        .addCommand(command)
        .addReferenceState(ReferencedStateAndRef(accountTo))
        .setTimeWindow(TimeWindow.fromOnly(Instant.now()))
  1. This state can now be referenced in the contract.

val referencedToAccount = tx.referenceInputRefsOfType<AbstractAccountState>().single().state.data

  1. Check that the destination account is not a loan account.
requireThat {
    "Recurring payment cannot be cancelled for loan repayments" using (referencedToAccount !is LoanAccountState)
}
  1. Check that the destination account is not a savings account that is still part of a savings plan.
requireThat {
    if (referencedToAccount is SavingsAccountState) {
        "Recurring payment cannot be cancelled for saving repayments during savings period" using
                (referencedToAccount.savingsEndDate.isBefore(tx.timeWindow!!.fromTime!!))
    }
}

Use the flows in this section to perform tasks related to payments. You can:

Use IntrabankPaymentFlow to transfer a specified amount of money from a credit account to another account.

IntrabankPaymentFlow(accountFrom: UUID, accountTo: UUID, amount: Amount<Currency>): SignedTransaction

  • accountFrom: The account the transfer originates from, identified by its accountId (UUID).
  • accountTo: The account the transfer is directed to, identified by its accountId (UUID).
  • amount: Amount specified to transfer.

This flow verifies that both accounts exist on the ledger, that accountFrom is a credit account, and that it has sufficient funds for the transfer to take place. If the accountFrom account has a transfer limit in place, this check is also done prior to the signing of the transaction.

SignedTransaction is returned when a flow has successfully updated the ledger, in this case when money is transferred from one account to the other.

Use CreateRecurringPaymentFlow to create a recurring payment for the specified amount of money to be transferred from a credit account to another account.

CreateRecurringPaymentFlow(accountFrom: UUID, accountTo: UUID, amount: Amount<Currency>, dateStart: Instant, period: Duration, iterationNum: Int?): SignedTransaction

  • accountFrom: The account the transfer originates from, identified by its accountId (UUID).
  • accountTo: The account the transfer is directed to, identified by its accountId (UUID).
  • amount: Amount specified to transfer.
  • dateStart: Instant: The date payments begins.
  • period: Duration: The duration of the recurring payment.
  • iterationNum: Int?: Number of iterations, or recurring payments, that should occur.

SignedTransaction is returned when a flow has successfully updated the ledger. In this case when the recurring payment has been created.

CancelRecurringPaymentFlow cancels a recurring payment with the ID recurringPaymentId by consuming the RecurringPaymentState schedulable state.

CancelRecurringPaymentFlow(recurringPaymentId: UniqueIdentifier): SignedTransaction

  • recurringPaymentId: UniqueIdentifier

You can schedule ExecuteRecurringPaymentFlow to execute a recurring payment occurrence. The flow is initiated by the StateRef of the RecurringPaymentState schedulable state, and is executed using the IntrabankPaymentFlow. The result is logged to the RecurringPaymentLogSchema.

ExecuteRecurringPaymentFlow(recurringPaymentStateRef): SignedTransaction

SignedTransaction is returned when a flow has successfully updated the ledger, in this case when the recurring payment has been scheduled.

val supportingDocumentationPath = File("/path/to/supportDocumentation.zip")

val attachment = serviceHub.attachments.importAttachment(
        supportingDocumentationPath.inputStream(),
        ourIdentity.toString(),
        supportingDocumentationPath.name)

val attachments = listOf(Pair(attachment, "Supporting documentation"))

val customerId = subFlow(
    CreateCustomerFlow(
        customerName = "AN Other",
        contactNumber = "5551234",
        emailAddress = "[email protected]",
        postCode = "ZIP 1234",
        attachments = attachments))

val signedTxFromAccount = subFlow(
    CreateCurrentAccount(
        customerId = customerId,
        tokenType = Currency.getInstance("EUR"),
        withdrawalDailyLimit = 500,
        transferDailyLimit = 1000))

val signedTxToAccount = subFlow(
    CreateCurrentAccount(
        customerId = customerId,
        tokenType = Currency.getInstance("EUR"),
        withdrawalDailyLimit = 500,
        transferDailyLimit = 1000))

val accountFrom = signedTxFromAccount.tx.outputsOfType<CurrentAccountState>().single()
val accountTo = signedTxToAccount.tx.outputsOfType<CurrentAccountState>().single()

subFlow(SetAccountStatusFlow(accountFrom.accountId, AccountStatus.ACTIVE))
subFlow(SetAccountStatusFlow(accountTo.accountId, AccountStatus.ACTIVE))

val amount = Amount(100000, Currency.getInstance("EUR")) // 1000 euro
subFlow(DepositFiatFlow(accountFrom, amount))

val amount = Amount(10000, Currency.getInstance("EUR")) // 100 euro
subFlow(IntrabankPaymentFlow(accountFrom, accountTo, amount))

val amount = Amount(10000, Currency.getInstance("EUR")) // 100 euro
subFlow(CreateRecurringPaymentFlow(accountFrom, accountTo, amount, Instant.now(), Duration.ofSeconds(10), 5))

val signedTx = subFlow(CreateRecurringPaymentFlow(accountFromId, accountToId, 10 of EUR, Instant.now(), Duration.ofDays(1)))

val amount = Amount(1000, Currency.getInstance("EUR")) // 10 euro
val signedTx = subFlow(CreateRecurringPaymentFlow(accountFrom, accountTo, amount, Instant.now(), Duration.ofDays(1)))

Reports and views are used in Bank in a Box to display individual account and customer information when queried as well as lists of accounts, customers, transactions, and recurring payments.

The flows in this section are an integral part of the user interface design as they create paginated responses that are returned for searches that users can perform via the user interface.

The business logic behind Bank in a Box reports and views is explained below, addressing how mapped schemas are implemented and used to display information in Bank in a Box.

A contract state implementing the QueryableState interface indicates that a custom table should be created for it in the node’s database and made accessible using SQL. The following shows an example of the RecurringPaymentState class with several unrelated properties and methods removed for clarity:

@BelongsToContract(RecurringPaymentContract::class)
data class RecurringPaymentState(
    val accountFrom: UUID,
    val accountTo: UUID,
    val amount: Amount<Currency>,
    val dateStart: Instant,
    val period: Duration,
    val iterationNum: Int?,
    val owningParty: AbstractParty,
    override val linearId: UniqueIdentifier = UniqueIdentifier()
) : QueryableState {

    override fun generateMappedObject(schema: MappedSchema): PersistentState {
        return when (schema) {
            is RecurringPaymentSchemaV1 -> RecurringPaymentSchemaV1.RecurringPayment(
                    this.accountFrom,
                    this.accountTo,
                    this.amount.quantity,
                    this.dateStart,
                    this.period,
                    this.iterationNum,
                    this.linearId.id)
            else -> throw IllegalArgumentException("Unrecognised schema $schema")
        }
    }

    override fun supportedSchemas(): Iterable<MappedSchema> = listOf(RecurringPaymentSchemaV1)
}

The QueryableState interface requires the generateMappedObject and supportedSchemas methods to be implemented. The supportedSchemas method returns a list of relational schemas supported by the state and the generateMappedObject method returns a generated instance of a schema from the current state’s context.

A concise representation of the associated RecurringPaymentSchemaV1 class is shown below:

object RecurringPaymentSchemaV1 : MappedSchema(
    schemaFamily = RecurringPaymentSchema.javaClass,
    version = 1,
    mappedTypes = listOf(RecurringPayment::class.java)) {

    @Entity
    @Table(name = "recurring_payment")
    class RecurringPayment(

        @Column(name="account_from")
        @Type(type = "uuid-char")
        var accountFrom: UUID,

        @Column(name="account_to")
        @Type(type = "uuid-char")
        var accountTo: UUID,

        @Column(name="amount")
        var amount: Long,

        @Column(name="date_start")
        var dateStart: Instant,

        @Column(name="period")
        var period: Duration,

        @Column(name="iteration_num", nullable = true)
        var iterationNum: Int?,

        @Column(name="linear_id")
        @Type(type = "uuid-char")
        var linearId: UUID

) : PersistentState()

The RecurringPaymentSchemaV1 class defines a single entity to represent a recurring payment database table. It uses JPA annotations to define the table name, column names, and types. The schema contains properties to store the relevant properties of the state, including accountFrom, accountTo, amount, dateStart, period, iterationNum, and linearId.

An off-ledger schema can be defined in a similar manner to the above MappedSchema class but will obviously not have an associating contract state.

The Corda Node provides services to query and persist mapped schemas. The following is an example query for the transaction log schema:

fun getTransactionLogByTransactionType(accountId: UUID, txType: TransactionType)
    : List<TransactionLogSchemaV1.TransactionLog> {

    return serviceHub.withEntityManager {
        val query = createQuery(
            "SELECT tl FROM TransactionLogSchemaV1\$TransactionLog tl " +
            "WHERE (tl.accountFrom = :accountId OR tl.accountTo = :accountId) " +
            "AND tl.txType = :txType ",
            TransactionLogSchemaV1.TransactionLog::class.java
        )
        query.setParameter("accountId", accountId)
        query.setParameter("txType", txType)
        query.resultList
    }
}

The above queries all transactions for account with ID accountId and of type transactionType (deposit, withdrawal, transfer). The withEntityManager method of the Corda Node services (serviceHub) provides access to the JPA API. An HQL query is constructed, selecting all fields from the transaction log schema, where the “from” or “to” account is equal to the given account parameter, and the transaction type is equal to the given transaction type parameter.

Use the flows in this section to perform tasks related to reports and views. These flows are all tied to the Bank in a Box front end. You can:

Use GetBalancesFlow to return a list of accounts for a customer with customerId.

GetBalancesFlow(customerId: UUID): List<AbstractAccountState>

  • customerId: UUID - The ID of the customer’s profile.

Use GetCustomerTransactionsFlow to return a list of transactions for a customer with customerId.

GetCustomerTransactionsFlow(customerId: UUID, dateStart: Instant, dateEnd: Instant): List<TransactionLogSchemaV1.TransactionLog>

  • customerId: UUID - The ID of the customer’s profile.
  • dateStart / dateEnd: The date range for which the flow returns transactions.

Use GetRecurringPaymentsFlow to return a list of recurring payments for a customer with customerId.

GetRecurringPaymentsFlow(customerId: UUID): List<RecurringPaymentState>

  • customerId: UUID - The ID of the customer’s profile.

Use GetAccountFlow to retrieve the ‘AbstractAccountState’ for a given accountId. This shows you if the account is PENDING, ACTIVE, or SUSPENDED.

  • customerId: ID of the account.

An exception is thrown if the account cannot be found.

Use GetAccountsPaginatedFlow, a Public API flow, to retrieve accounts and associated customers in a paginated list for given repositoryQueryParams and (optionally) dateFrom and dateTo.

  • repositoryQueryParams: This object holds searchTerm, pagination, and sorting data.
  • dateFrom (optional): Filters accounts with txDate after a given date.
  • dateTo (optional): Filters accounts with txDate before a given date.

RepositoryQueryParams.searchTerm can be matched in LIKE fashion against multiple fields. The result set can be sorted based on RepositoryQueryParams.sortField and RepositoryQueryParams.sortOrder values against all fields in AbstractAccountState and CustomerSchemaV1.Customer.

Use the GetCustomerByIdFlow to retrieve the CustomerSchemaV1.Customer, which stores personal details and contact information along with creation and modification timestamps, for a given customerId.

  • customerId: ID of the customer.

An exception is thrown if the customer cannot be found.

Use the GetCustomersPaginatedFlow to return a paginated list of all customers matching the given criteria.

  • repositoryQueryParams: This objects holds a repository query’s possible parameters along with sort and pagination information.

Use GetRecurringPaymentsByIdFlow, a public API flow, to retrieve the RecurringPaymentState for a given LinearId.

The RecurringPaymentState stores the following information.

  • Transfer information:
    • accountFrom
    • accountTo
    • amount
  • Scheduling information:
    • dateStart
    • period
    • iterationNum

Use the GetRecurringPaymentsForAccountPaginatedFlow, a public API flow, to retrieve recurring payments in a paginated list for a specific account with accountId.

  • repositoryQueryParams: This object holds searchTerm, pagination, and sorting data.
  • accountId: The ID of the account that will be matched against the accountFrom and accountTo fields of the RecurringPaymentSchemaV1.RecurringPayment.
  • dateFrom (optional): Filters accounts with txDate after a given date.
  • dateTo (optional): Filters accounts with txDate before a given date.

The RepositoryQueryParams.searchTerm can be matched in LIKE fashion against multiple fields. The result set can be sorted based on RepositoryQueryParams.sortField and RepositoryQueryParams.sortOrder values against all fields in RecurringPaymentLogSchemaV1.RecurringPaymentLog and RecurringPaymentSchemaV1.RecurringPayment.

Use GetRecurringPaymentsForCustomerPaginatedFlow, a public API flow, to retrieve recurring payments in a paginated list for a specific customer with customerId.

  • repositoryQueryParams: This object holds the searchTerm, pagination, and sorting data.
  • customerId: The ID of the customer which will be matched against the accountFrom and accountTo owner fields of the RecurringPaymentSchemaV1.RecurringPayment.
  • dateFrom (optional): Filters accounts with txDate after a given date.
  • dateTo (optional): Filters accounts with txDate before a given date.

Use GetRecurringPaymentsPaginatedFlow, a public API flow, to retrieve recurring payments in a paginated list.

  • repositoryQueryParams: This object holds searchTerm, pagination, and sorting data.
  • dateFrom (optional): Filters accounts with txDate after a given date.
  • dateTo (optional): Filters accounts with txDate before a given date.

Use GetTransactionsForCustomerPaginatedFlow, a public API flow, to retrieve transactions in a paginated list for a specific account with accountId.

  • repositoryQueryParams: This object holds searchTerm, pagination, and sorting data.
  • accountId: The ID of the account that will be matched against the accountFrom and accountTo fields of the RecurringPaymentSchemaV1.RecurringPayment.
  • dateFrom (optional): Filters accounts with txDate after a given date.
  • dateTo (optional): Filters accounts with txDate before a given date.

Use GetTransactionsPaginatedFlow to retrieve all transactions for a given customerId in a specified time frame.

  • queryParams: Pagination parameters.
  • customerId: The ID of the customer.
  • dateFrom: Filters accounts with txDate after a given date.
  • dateTo: Filters accounts with txDate before a given date.

Use GetCustomerNameByAccountFlow to return the associated customer name for a specified accountId.

  • accountId

Use GetAccountsForCustomerPaginatedFlow to return a list of accounts for a specified customerId.

  • queryParams: Pagination parameters.
  • customerId: The ID of a customer.

Use GetRecurringPaymentByIdFlow to return the information on a recurring payment, specified by its linearId.

  • linearId: UUID

Use GetTransactionByIdFlow to return the information of a transaction, specified by its txId (transaction ID).

Use GetTransactionsForAccountPaginatedFlow to return a list of transactions for an account, specified by the accountId.

  • queryParams: Pagination parameters.
  • accountId: The ID of a customer.
val supportingDocumentationPath = File("/path/to/supportDocumentation.zip")

val attachment = serviceHub.attachments.importAttachment(
        supportingDocumentationPath.inputStream(),
        ourIdentity.toString(),
        supportingDocumentationPath.name)

val attachments = listOf(Pair(attachment, "Supporting documentation"))

val customerId = subFlow(
    CreateCustomerFlow(
        customerName = "AN Other",
        contactNumber = "5551234",
        emailAddress = "[email protected]",
        postCode = "ZIP 1234",
        attachments = attachments))

val signedTxFromAccount = subFlow(
    CreateCurrentAccount(
        customerId = customerId,
        tokenType = Currency.getInstance("EUR"),
        withdrawalDailyLimit = 500,
        transferDailyLimit = 1000))

val signedTxToAccount = subFlow(
    CreateCurrentAccount(
        customerId = customerId,
        tokenType = EUR,
        withdrawalDailyLimit = 500,
        transferDailyLimit = 1000))

val accountFrom = signedTxFromAccount.tx.outputsOfType<CurrentAccountState>().single()
val accountTo = signedTxToAccount.tx.outputsOfType<CurrentAccountState>().single()

subFlow(SetAccountStatusFlow(accountFrom.accountId, AccountStatus.ACTIVE))
subFlow(SetAccountStatusFlow(accountTo.accountId, AccountStatus.ACTIVE))

val amountOneThousandOfEuro = Amount(100000, Currency.getInstance("EUR"))
val amountOneHundredOfEuro = Amount(10000, Currency.getInstance("EUR"))
subFlow(DepositFiatFlow(accountFrom, amountOneThousandOfEuro))
subFlow(IntrabankPaymentFlow(accountFrom, accountTo, amountOneHundredOfEuro))

val accountFromBalance = subFlow(GetBalancesFlow(accountFrom.accountData.customerId).single())
val accountToBalance = subFlow(GetBalancesFlow(accountTo.accountData.customerId).single())

val transactionLogAccountFrom = subFlow(GetCustomerTransactionsFlow(accountFrom.accountData.customerId)).single()
val transactionLogAccountTo = subFlow(GetCustomerTransactionsFlow(accountTo.accountData.customerId)).single()

val amount = Amount(10000, Currency.getInstance("EUR")) // 100 euro
subFlow(CreateRecurringPaymentFlow(accountFrom, accountTo, amount, Instant.now(), Duration.ofDays(30), 5))

val recurringPaymentsFrom = subFlow(GetRecurringPaymentsFlow(accountFrom.accountData.customerId))
Previous
Getting started
Next
User interface (UI)

Was this page helpful?

Thanks for your feedback!

Chat with us

Chat with us on our #docs channel on slack. You can also join a lot of other slack channels there and have access to 1-on-1 communication with members of the R3 team and the online community.

Chat with us
Propose documentation improvements directly

Help us to improve the docs by contributing directly. It's simple - just fork this repository and raise a PR of your own - R3's Technical Writers will review it and apply the relevant suggestions.

Learn how

We're sorry this page wasn't helpful. Let us know how we can make it better!

Chat with us

Chat with us on our #docs channel on slack. You can also join a lot of other slack channels there and have access to 1-on-1 communication with members of the R3 team and the online community.

Chat with us
Create an issue

Create a new GitHub issue in this repository - submit technical feedback, draw attention to a potential documentation bug, or share ideas for improvement and general feedback.

Create a new issue
Propose documentation improvements directly

Help us to improve the docs by contributing directly. It's simple - just fork this repository and raise a PR of your own - R3's Technical Writers will review it and apply the relevant suggestions.

Learn how